Latest sinumerik Tenders | Government sinumerik Tenders

Central Government/Public Sector

CTN :41812994

03 Oct, 2025 NA

Multi City - Multi State

Tender For supply of automatic pneumatic pressure calibrator/controller

State Government

CTN :41742615

25 Sep, 2025 NA

Supaul - Bihar

Tender For supply of electrical and electronics engg. lab equipments - symmetrical and unsymmetric al faults of transmission line, testing of hrc fuse and mcb overcurrent trainer, relay, vcb trainen, three phas air circuit breaker (acb) trainer, differential relay trainer transformer kit for, generator protection relay trainer kit, dc servo position control trainer kit, ac servo position control trainer kit, stepper motoer, synchro transmitter receiver , ammeters mi type, voltmeter mi type, wattmeter single phase/three phase , three phase power factor meters , automatic power factor controller, low power factor wattmeter single phase , lux meter, digital/energy meter shunt multiplier, current transformer potential transformer, model of mi mc, dynamomete rand induction type meters, lcr/q meter hand held type, soldering iron synchroscop je frequency, clip-on meter, electrical and electronics tools, three phase, squirrel cage induction motor (cut section model), shp three phase ac slip ring induction motor trainer, dc shunt motor-alternator set, basic wiring tools, solar cell experiment setup, spv stand, main rack, brushless dc motor trainer kit, dual power supply, multimeter, lcr meter, cathode ray oscilloscope, function generator, signal generator, digital ic tester, analog ic tester, smd soldering equipment, cables/connectors, television set, television set, projector, maintenance kit, tools, vacuum cleaner/blower, components, microwave test bench, klystron power supply, microwave test bench-x, vswr meter, frequency meter, pin modulator , dso, dc regulated power supply, synchro transmitter and receiver trainer kit, servo motor, on-off control kit, temperature sensor, pi controller kit,, temperature sensor, pd controller kit, temperature sensor, pid controller kit, temperature sensor, plc, digital multimeter , routers, repeater, hub, switch, connecting cables and connectors, network bridge, null modem.cable , microcontroller trainer kit, cro, stepper motor, 7-segment led display, trainer board, trainer board, trainer board, microcontroller board, sensors, digital multimeter and micro-ammeters a, dual channel cro, passive components, resistor, variable inductor, potentiometer, digital multimeter, true rms multimeter, dual channel cro, dc regulated power supply, scr, dc regulated power supply, thyristor kit, resistive load, resistive- inductive load

Central Government/Public Sector

CTN :41648531

16 Sep, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of sinumerik pcu 50.5-c , sinumerik hhu , sinumerik mcp 483c pn , siemens make terminal strip converter , sinumerik battery and fan unit , sinumerik battery , siemens make signal cable , simatic tp 270 touch panel

Central Government/Public Sector

CTN :41742589

18 Sep, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of sinumerik pcu 50.3-p, 6fc5210-0df33-2aa1 sinumerik pcu 50.3-p electronic control unit pm760; 2.0 ghz, 1024 mb ram; 24 v dc; with ssdwindows xp professional for embedded systems (windows xp professional for embeddedsystems)

CTN :41569505

15 Sep, 2025 NA

Thiruvarur - Tamil Nadu

Tender For corrigendum : supply of sinumerik 840d sl ncu 710.3b pn

CTN :41729009

17 Sep, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of misc items d d - pvc tape , battery terminal , terminal patti , cutting wheel 350 mm , welding holder , pvc copper wire 1 mm , pvc copper wire 4 mm , pvc copper wire 6 mm , cut out 63 amp , screw jipson 50 mm , screw jipson 75 mm pkt of 100 nos , screw jipson 100 mm pkt of 100 nos , torch rechargeable , speed controller , hub for ridger , kisan pipe 3 inch , automatic fogger kit , pto pulley reqmt of tractor swaraj 855 one star , pto pulley reqmt of tractor swaraj 855 four star , copper cable 2 core , cooler pad honey comb type size 4x4 feet x 4 inch

CTN :41730156

16 Sep, 2025 NA

Parganas - West Bengal

Tender For providing of custom bid for services - supply & fitment siemens make sinumerik 828d cnc package without motor for upgradation of 2 nos hmc-320m cnc machine rfi regd no 12948 & 12950 details as per annexure-a & b on whole job basis

CTN :41508269

17 Sep, 2025 NA

Shahdol - Madhya Pradesh

Tender For corrigendum : supply of botany lab equipment - procurement of botany lab equipment, modular laboratory workstation (with sink, switches) specification steel/ iron made, total size 500sq feet, real time electrophoresis system, with power supply specificationvertical slab gel system polyacrylamide gel, craft s micro imaging system specificationimported camera eyepiece with computer or laptop connectivity with usb port, entomological dissecting microscope specificationlens 83 mm dia. eye-pieces 10x and 20x, donna- pattal making machine specificationfully automatic double die crank machine, raw material banana leaf, palash leaf, etc, 220v, 1hp motor, mild steel , imported e-learn interactive white boards specification75 inches 4k uhd touch screen led tv ultratouch display interactive flat panel monitor(3840 x 2160 pixels) , horizontal laminar flow specification4 2 2 (stainless steel body) 90 lt./per hepais 90 + 20 fpm noise level in very low, working fluorescent light, pcr teaching kit specificationtest efficient and easy to use, colony counter specification4 digit, microlit micropipette specificationmultichannel 8 channel fully auto removable, dahl digestion unit specificatonaluminium heating block and fumes extraction system, digestion of plant, soil sludge, food grams, processing 100 ml tubes, leaf area meter specificationfully automatic, portable water/soil kit specificationph mv conductivity, tds salinity, turbidity, d.o. and temp., magnetic stirrer with hot plate specification2 liters capacity, water bath rectangular specification16" 12" 4" 12 holes of 3" diameter, seed germinator specificationsingle chamber, suitable for conducting experiments on variety of seeds under different conditions of temp. and humidity. inner size 555 910 605 mm s.s. interior having 6 nos. adjustable shelves. tabular heaters are fitted. windowed front glass door outer inner full view acrylic door enabling to keep temp. and humidity level un-interrupted. full feature digital temp. controller cum indicator with voltmeter stainless steel with 14 trays., tissue culture rack specificationfitted with switches and 0-24 hrs. timer made of mild steel duly painted. rack size 48 21 (depth) is covered with thick ubreakableplexi-glass. each rack fitted with 4 fluorescent tubes and four bulbs. it is a unit with four shelf. each shelf with one u.v. tube for sterilization purpose., electronic balances digital specificationkea-210 200 gm 0.001 gm (1 mg) 80 mm , laboratory bod incubator specification12 cu.ft. 900 650 550mm s.s inner capacity 340 liter, fully automatic fume hood specification1500x750x2100mm, universal phase contrast cum dark field/bright field binocular research microscope specificationequipped with double slidder unit and condenser system which enables bright field, dark ground and phase contrast observation by a simple change over procedure. this microscope is designed latest phase techniques for most convenient observation of all colourless and transparent specimens and living bacteria etc. wihout staining. provides excellent contrast and a perfect flat image. coarse motion with universal locking device and highly sensitive fine focusing reading to 0.002 mm. supplied with imported slider phase contrast cum dark field equipment having phase annuls with abbe condenser and set of phase plates and provision for accurate centering. supplied with din standard optics, fluorescence microscope (imported-flurex) specificationepi-fluorescence arm with butyl in two/four (option) filters (uv, v, b, g) dichoric mirror and barrier filters. wf 10x/fov 20 mm (paired). objective plain achromatic objective 4x, 10x, 40x, 100x. fluorescence objective 4x, 10x, 40x, 100x. standard interference filters 1. b excitation (400-490 nm); 2. g excitation (510-550 nm). optional 1. uv excitation (300-400 nm); 2. v excitation (395-415 nm). transmitted tungsten halogen lamp. fluorescent sources 100 w mercury lamp. complete with instruction manual

State Government

CTN :41365007

15 Sep, 2025 NA

Phaltan - Maharashtra

Tender For corrigendum : supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can te

CTN :41734386

20 Sep, 2025 NA

Datia - Madhya Pradesh

Tender For supply of miscellanouse item equipment material - name of miscellanouse item equipment furniture and other material, online ups cum invertor with battery 20kva 3ph 20kva (3phase input &1phase output)backup for 120 minute backup min. 64000 vah (as per attached specification), 500 lph commercial reverse osmosis system with storage tank capacity 1000ltr frp (as per attached specification), 3 seater bench office visitor chair outdoor indoor furniture stainless steel frame (steel pipe seat with backrest) (as per attached specification), digital controller 62.5kvaoil cooled servovoltagestabilizer,for commercial, floorwith supply ,installation, testingandcommissioning (as per attached specification), slotted angle rack (open) 6 shelve (as per attached specification), slotted angle rack (three side covered) 6 shelve (as per attached specification), double locker for narcotic (as per attached specification), geyser 25 ltr (as per attached specification), refrigrator 220 ltr (as per attached specification), electric flying cather (as per attached specification), electric ceiling fan (as per attached specification), wall mounting fan (as per attached specification), shoe rack- fiber (as per attached specification), cubicle curtain for in icu hospital use (as per attached specification), air quality index meter (as per attached specification), soap dispenser 500ml (simple) (as per attached specification), soap dispenser 500ml (automatic touchless) (as per attached specification), refrigrator thermameter digital (as per attached specification), plastic container with 6 compartment (as per attached specification), plasti ccontainer plan (as per attached specification), plastict ray (as per attached specification), 3 tier office filingtrays (as per attached specification), hub cutter with sharp container 1500 ml (as per attached specification), bio-medical sharp container white (1ltranslucent) (as per attached specification), bio-medical sharp container white (5l,translucent) (as per attached specification), biomedical sharp container puncture proof blue(ce&iso 23907certified) pp (polypropylene) dustbin (blue) 5ltr (as per attached specification), biomedical sharp container puncture proof blue(ce&iso 23907certified) pp (polypropylene) dustbin (blue) 10 ltr (as per attached specification), 10 inch cable ties 300 x 3.6 mm nylon zip wire organizer self locking tie (white)-100 pieces/pack (as per attached specification), stretcher (trolley & top) (as per attached specification), wheel chair (as per attached specification), excutive high back chair (as per attached specification), stainless steel 1 seater capsule pipe visitor chair, with armrest (as per attached specification), loundry bucket 60 ltr capacity standard quality heavy plastic non breakable, 13 fin ofr (oil filled radiator)| room heater (as per attached specification), change over 200 amp., 415 volte (legrand, anker, havells, etc same standard.) 3 phase (mannual) (as per attached specification), 1 phase deep well submersible pump stainless steel body 2 hp, 7-8 stages (as per attached specification), 3 phase deep well submersible pump steel body 5 hp, upto 5 stages (as per attached specification), 3 phase deep well submersible pump steel body 7.5 hp, 13-14 stages (as per attached specification), split ac (inverter model, cooling only) 1.8/2 tr star rating 3 star (as per attached specification), split ac (non inverter model, cooling only) 1.8/2 tr star rating 3 star (as per attached specification), biomedical waste bins (color coded bins) set 15-20 ltr foot operated lid (as per attached specification), biomedical waste bins (color coded bins) set 35-40 ltr foot operated lid (as per attached specification), biomedical waste bins (color coded bins) set 55-60 ltr foot operated lid (as per attached specification), plastc frosty bucket 18-20 ltr delux (as per attached specification), digital red led square wall clock (black, 25.4 cm x 25.4 cm x 3.5 cm), tent air cooler 200 lt

Sinumerik Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government