Get complete information related to latest Siteworks Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Siteworks Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Siteworks Tenders.
Tender For material and labour for construction of 334 mtr retaining wall (ht 5m) in ferozepur - excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil all as specified and directed., m&l for cement concrete 1:4:8 type d-2 as in foundation fillings and mass concrete complete all as specified ., m & l formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work vertical or to batter complete all as specified., m & l formwork to faces of walls, retaining walls, abutments, parapet and stairecase railings and similar work including attached pillasters, butterssses, etc. vertical or to batter with feir finished surface complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in foundations, including raft, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under reamed piles and mass cincrete complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in walls, retaining walls, basements walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified., m & l for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified., s&f for pvc (swr) 110mm pipes complete all as specified., returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, hand packing (gauge 40 to 80 mm) at back of walls over arches etc. and raising (or lowering) to the required level, hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, note: in case doubling/duplicancy of boq items , the lowest quoted rate shall be applicable for payment.
Tender For supply and construction of 200mtr retaining wall (ht 3) at ferozepur - excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil all as specified and directed., m&l for cement concrete 1:4:8 type d-2 as in foundation fillings and mass concrete complete all as specified ., m & l formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work vertical or to batter complete all as specified., m & l formwork to faces of walls, retaining walls, abutments, parapet and stairecase railings and similar work including attached pillasters, butterssses, etc. vertical or to batter with feir finished surface complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in foundations, including raft, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under reamed piles and mass cincrete complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in walls, retaining walls, basements walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified., m & l for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified., s&f for pvc (swr) 110mm pipes complete all as specified., returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, hand packing (gauge 40 to 80 mm) at back of walls over arches etc. and raising (or lowering) to the required level, hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, note: in case doubling/duplicancy of boq items , the lowest quoted rate shall be applicable for payment.
Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,
Tender For supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by the contractor.
Tender For bid to ras supply of excavating in trenches n as mentioned in the scope of work , m and l pcc type d2 using 40 mm stone as mentioned in the scope of work , returning filling in incl levelling as mentioned in the scope of work , removing excavated material soil as mentioned in the scope of work , m and l for brick works with fly bricks as mentioned in the scope of work , m andl for 15mm thick rendering in cement as mentioned in the scope of work , s and f for roof trusses framed trussed as mentioned in the scope of work , s and f pre painted galv alu gi based as mentioned in the scope of work , s and f prepainted galv alu gi based as mentioned in the scope of work , m and l for preparation of new as mentioned in the scope of work , m and l for rcc nominal mix as in beams cas mentioned in the scope of work , m and l for ms tmt bars 10mm d and overas mentioned in the scope of work. , m and l for fair finished flat form work as mentioned in the scope of work , m and l for providing plain cement concrete type as per scope of work , material and labour for glazed ceramic coloured as per scope of work , m and l for pre of newly plastered surfaces of walls as per scope of work , s and f for deco fancy type pvc moulded concrete jalli as per scope of work ) /bid number : gem/2026/b/7403850 * /dated: 08-04-2026 & & / bid document 1 / 19
Tender For work of providing safety protection to staff quarters at ghatkopar low level reservoir under ae (m) wwes-ii., providing general pest control service to the buildings to control the nuisance of cockroaches, lizards, bed bugs and other insects etc. by minimum four operation as and when directed in a year including monthly check up with additional operations if required and as directed by engineer-in-charge. (r3-cs-at-6), providing anti termite treatment conforming to is- 6313 (part-iii) to the wooden frames of doors / windows of the existing buildingby drilling the 3 mm dia. holes at 150mm c/c and at the junction of wood work and masonry work to downward angle of 45 degree and injecting 500 ml per hole or until refusal with oil / kerosene based chloropyrifos ec 20 emulsion or equivalent of 1% concentrate, sealing the holes by filling the putty etc complete as directed by engineer-in-charge with 2 years guaranty. (r3-cs-at-4) , providing anti-termite treatment around the periphery of the existing building conforming to is-6313 (part iii) by excavating trenches of 20cm width and exposing the sides of the columns, plinth beams and wall upto a depth of 300mm, rodding for the holes of 300mm deep and at 150m c/c in the trenches, treating with chloropyrifos ec 20 emulsion or equivalent of 1% concentration by weight at the total rate of 2.25 litters per meter including backfilling the trenches etc. complete as directed by engineer-in-charge covering 2 years guaranty.(r3-cs-at-2)
Tender For annual civil maintenance and development works in ucil housing colony jaduguda for one year d d - earth work in excavation , filling available excavated earth , filling in plinth with sand , dismantling old plaster , demolishing cement concrete , cleaning jungle , demolishing brick work , plain cement concrete 1 isto 3 isto 6 , plain cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1 5 isto 3 , steel reinforcement , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , 25mm thick cement concrete flooring , the overhead tank , asbestos cement sheet , g i sheet in roofing , structural steel work , 35mm thick isi marked flush door , 24 mm thick factory made pvc door shutters , white washing , water proofing cement paint , premium acrlic smooth exterior paint , white cement based putty , acrylic emulsion paint , cleaning of overhead water tank , renewing glass panes , paver block , vitrified tiles , ceramic glazed wall tiles , orissa pattern w c pan , european type w c pan , white vitreous china wash basin , vitreous china wash basin , mirror of superior glass , flushing cistern , low level cistern , pedestal type w c pan , 15 mm bided or jet spray , c p brass shower rose , c p brass angle valve , brass stop cock , close hole wall mixer tap , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , 75 mm plain bend , 100 mm plain bend , 15 mm g i pipes , 20 mm g i pipes , 15mm normal bore g i union , 20 mm normal bore g i union , c p brass extension nipple , p v c waste pipe 32 mm dia , c p brass bib cock , brass bib cock , brass extension nipple , ball valve , renewal of old putty , excavating trenches , surface dressing , transportation of excavated earth , foundations or footings or bases of column etc. for mass concrete , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , water proofing treatment , synthetic enamel paint , cement primer , chain link , 18 mm thick granite
Tender For supply of excavating in trenches n exc 1.5m wide as per scoope of work , m and l pcc type d2 using 40 mm graded stone as per scoope of work , returning filling in including spreading levelling as per scoope of work , m and l sand filling under floors or in foundations as per scoope of work , surface dressing n. exc 15 cm deep in soft loose soil as per scoope of work , m and l for stone hardcore of gauge as per scoope of work , m and l for 100 mm thick pccm as per scoope of work , m an l for prepolished chemically treated as per scope of work , m and l for brick works with fly ash bricks straight as per scope of work , m and l for brick works with fly ash bricks straight as per scoope of work , m and l for rcc nominal mix type b1 as per scoope of work , m and l for mild steel tmt bars 10mm dia and overas per scoope of work , formwork to sides and soffits of flooras per scoope of work , material and labour for vitrified ceramic joint free as per scoope of work , m and l for vitrified ceramic joint free tiles as per scoope of work , m and l for 15 to 18 mm thick granite as per scoope of work , m and l repair of 18mm thick marine ply laminatedas per scoope of work , m and l as in repair sheet glass 3 mm thick as per scoope of work , m and l for 12 mm thick ply gradei as per scoope of work , m and l 100 mm long stainless steel hinges as per scoope of work , m and l stainless steel c profile handle including as per scoope of work ) /bid number : gem/2026/b/7403889 * /dated: 11-04-2026 & & / bid document 1 / 22
Tender For excavating conveyor belt open end cleat fitting, for frm machine. equivalent to plasser part no.: re20.427/re20.425/re20.725, size.: 500mm width x 10mm x 19500mm length, specification- as per annexure-i part make: plasser/dunlop/nirlon/mrf/mr/virshubh/biswas/jagriti. note: material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. note: the necessary test certificate to be submitted by supplier along with supply of material. [ warranty period: 30 months after the date of delivery ]
Tender For maintenance of roads, fixing bell mouths bailing out water, , gi pipes providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc., excavating trenches of required width and depth for pipes, cables, etc, demolishing cement concrete manually, dismantling g.i. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead, cement concrete (cast in situ) providing and laying