Latest skilled labour Tenders | Government skilled labour Tenders

Corporations/Associations/Others

CTN :45723857

08 Jul, 2026 NA

Ahmednagar - Maharashtra

Tender For supply of skilled unskilled and half skilled labour for the various work under different department for rahata municipal council

Corporations/Associations/Others

CTN :45721980

06 Jul, 2026 10.00 Lacs

Pune - Maharashtra

Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and

State Government

CTN :45721001

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan jaipur - providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness, providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick : is 710- 1976 marked 12mm thick teak ply bwr both side, providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade : ivory coast wood grade i, providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. with brass cover plate

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Corporations And Associations And Others

CTN :45723486

08 Jul, 2026 5.01 Lacs

Delhi - Delhi

Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 140 inderpuri under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

Corporations And Associations And Others

CTN :45723488

08 Jul, 2026 5.08 Lacs

Delhi - Delhi

Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 87 ranjeet nagar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity, fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (b) single phase 3.0 hp having discharge of 100 lpm approx. at 52 m head, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., supply, installation, testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor, relay , mcb ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. (c) 3 hp (three phase), providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", supply of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

Corporations And Associations And Others

CTN :45723490

08 Jul, 2026 5.04 Lacs

Delhi - Delhi

Tender For procurement of material and hiring of labour for day to day maintenance of various electrical installations in municipal parks and buildings in ward 139 narayana vihar under kbz - supply of 1.5 sq. mm isi marked, frls pvc insulated,single core copper conductor cable as required., supply of 4.0 sq. mm isi marked, fr pvc insulated, single core copper conductor cable as required., supply of 63 amps., 2 pole isolator as required., supply of 6 a, to 32 a, ratings, dp mcb, "c" curve, 10 ka breaking capacity as required., supply of 6a to 32 a ratings, sp mcb, "c" curve, 10 ka breaking capacity as required., fabrication, supplying and fixing class b galvanised single overhang arm bracket made out of 250 mm long galvanised top tube with cap and 1000 mm long 32 mm dia galvanised pipe with tightening bolts complete as required., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:- 2x 6 sqmm, supply of xlpe insulated pvc sheathed al. conductor armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of following size of pvc insulated & pvc sheathed copper conductor 3 core submersible cable conforming to is . 694/210 etc. as rqd. 3 2.5 sqmm with voltage grade 1100 volts., supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (c) three phase 5.0 hp having discharge of 300 lpm approx. at 39 m head., providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. skilled labour", providing following labour for day to day maintenance of ward i/c required t&p etc. in one shift in a day on all working days (required maintenance material will be provided by department) as required as per terms & condition of the department (excluding parts) complete as required. 1. un-skilled labour", subppy of led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy 120 135 lm/watt) of following body materials. - 45 watt

Central Government And Public Sector

CTN :45723977

07 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot miscellaneousellaneous scrap - lot of scrap wooden consisting of miscellaneous sorts and off sizes wooden furniture, material almirah, window, table, chair,packing wood, damaged plywood, wooden boxes with iron attachment and wooden pallets,wooden items with or without dismantle broken condition and with or without iron, cushion and slightly nf/f and other attachment.as available as in the lot. cutting or breaking allow only for loading pupose. (p.l. no-98410088). remarks:- if any non ferrous items found during delivery it should be removed from lot and purchaser should be handed over to the stock holder.

Skilled Labour Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors