Latest skin ultrasound Tenders | Government skin ultrasound Tenders

State Government

CTN :45007424

29 May, 2026 1.49 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : complete overhauling of electrical wire rope hoist along with supply of spares for electrical wire rope hoist installed at coal mill area at 2x600 mw, stage-i, sstpp, mppgcl, dongalia. - scope of service, complete supervision & installation of new spares/replacement of damaged/eroded spares of all 08 numbers of hoist (04 numbers capacity-20 ton & 4 numbers of capacity-15ton)., scope of supply, spares for 20 ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4 duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct<, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 20, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 20 mm / 6x36 steel core/ galvanized, make- ushamartin, push buttons with 12 meter cable, rectifier size- eh720hhd, long travel dsl system, i- chain (5 mm)-, ii- cable 6 mm epr, iii- fasteners (1/4x2 ), lt motor shaft, lt motor pinion, spares list of 15-ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4,duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 18, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 15 mm / 6x36 steel core/ galvanized, make- ushamartin, pendent push buttons, rectifier size- eh720hhd, long travel dsl system, chain (5 mm)-, cable 6 mm epr, fasteners (1/4x2 ), lt motor shaft, lt motor pinion

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

CTN :44675054

01 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of dual head spect-ct imaging system

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :44399633

16 Jun, 2026 NA

Kamrup - Assam

Tender For corrigendum : procurement of medical equipment for mmch (package 1) - supply, installation,testing and commissioning of mri 3 tesla(along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of biplane dsa system with large flat panel detector with inbuilt angiography and intervention and stereotactic radiotherapy (along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of 256-slice dual energy spectral high end ct scanner (along with associated works, accessories and allied items as specified), supply, installation,testing and commissioning of 64 slice ct scan machine(along with associated works, accessories and allied items as specified), price schedulefor related services to be offered from outside and within the purchaser s country, comprehensive annual maintenance contract (camc) of the complete unit (mri 3 tesla) including spares and consumables for 5 years (after initial on-site warranty period), comprehensive annual maintenance contract (camc) of the complete unit (biplane dsa system with large flat panel detector with inbuilt angiography and intervention and stereotactic radiotherapy)including spares and consumables for 5 years (after initial on-site warranty period), comprehensive annual maintenance contract (camc) oft he complete unit (256-slice dual energy spectral high end ct scanner)including spares and consumables for 5 years (after initial on-sitewarranty period), comprehensive annual maintenance contract (camc) of the complete unit (64 slice ct scan machine)including spares and consumables for 5 years (after initial on-site warranty period)

CTN :45334324

15 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For e – tender for the purchase of medical equipment and furniture for state cancer institute, koni, cims bilaspur (c.g.), government of chhattisgarh - secretariat /executive officetable –rectangular - 16 slice c.t. simulator, digital x-ray machine with 10 year warranty & accessories, ultra sound machine with 10 year warranty & accessories, c-arm machine with 10 year warranty & accessories, hdr brachytherapy using at least 20 sources (co-60/ir-192), integrated usg and c-arm imaging system, hdr brachytherapy using co-60/ir-192 source- accessories,, spares, consumables & dosimetry, ot equipment, 1. mayo stand, 2. anaesthesia trolley (complete with ambu bags and other, items), 3. difficult airway trolley - bronchoscope, lmas and, intubating bougie, 4. anaesthesia machine & anaesthesia work station, 5. electrical suction, 6. laryngoscope with 5 blades (led), 7. defibrillator (aed plus manual with ecg), 8. surgical diathermy - bipolar, 9. ecg machine – high end multichannel, 10. bowl sterilizers - different sizes, 11.oxygen cylinder d. type, 12. washer disinfector, 13. blood warmer, 14. glucometer, 15. anaesthetic - laryngoscope magill’s with four blades, 16. endotracheal tubes: different sizes, 17. magill’s forceps (two sizes- adult & paediatrics), 18. e.t.t. and connector set of six, 19. catheter mount for connecting ett, 20. airway male & female - guedel oral airway (to be, provided as per need), 21. airway male & female - nasopharyngeal airway, 22. tongue depressors, 23. n2o cylinder for boyles-d type, 24.co2 cylinder for laparoscope, 25. spirometer, 26. exchange transfusion sets, 27. adult resuscitation kit, 28. neonate resuscitation kit (to be provided as per need), 29. emergency first aid kit (to be provided as per need), 30. multi para monitor (desirable anaesthesia work station, available in ot), 31. infusion pump, 32. syringe pump, 33. pressure bags for pushing blood during massive transfusion, 34. oxygen concentrator, 35. ot ceiling light double combination with centrally, mounted camera (quantity - 01 nos), ward equipment, 1. vital signs monitor (multiparameter), 2. bp apparatus (digital/manual), 3. thermometers (digital/infrared), 4. pulse oximeters, 5. glucometers + strips, 6. thermometers (oral, rectal, digital and ir), 7. stethoscopes, 8. weighing scales (adult, pediatric), 9. infusion pumps, 10.syringe pumps, 11. nebulizer machine, 12. ecg machine-6 channel, ecg roll(50 no), portable ecg, leads, & electrodes, 13. automated external defibrillator (aed), 14. manual defibrillator, 15. suction machine (portable & wall-mounted) with 100 no, suction tubes, 16. tourniquets, 17. ecg machine, 18. cpap/bipap machine, 19. bp apparatus digital, 20. fumigator, 21. needle cutter, 22. drug refrigerator, 23. dressing trolley, 24. crash cart, fully automatic rotary microtome, fully automated immuno histochemistry staining system, paraffin embedded station rt, high throughput robotic stainer, automatic vacuum tissue processor, fully automated slide stainer, digital colposcope, hospital furniture, 1. secretariat / executive office table –rectangular, 2. executive &revolving chair with high back, 3. executive &revolving chair with high back- ergonomic chair, 4. executive office table with side storage-rectangle/l shape, 5. executive &mesh-revolving chair with arms & mid back, 6. revolving chair, 7. special sofa 3 seater- tubular steel, 8. rectangular- modular centre table with glass top, 9. computer table with printer/copier/fax combination desk, 10. wall mounted & over head chamber type wooden, wardrobe, registration desk(01 no) & window display cum, counter rack- customized with all locking system- customized, 11. round wastepaper basket, made of steel, 12. white board(pt notes), 13. notice board, 14. whatnot/corner shelf, 15. clock, 12" diameter. round surface, 16. composite office desk, 17. wall mounted dressing mirror, 18. towel rack/rail, 19. hand drier- automatic, 20.

CTN :45314456

05 Jun, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply and installation of bera system - supply & installa tion of bera system, software and accessories -(specification mentioned as in the notice inviting tender document), specifications ecochg cortical aep (p100, llr, p300, mmn) am lr, eabr vestibular evoke d myogenic potenti al (vemp) algo rithm for emg rec tification assr, stacked abr (if p ossible). transducers - ins ert earphone s -td h headphone -bon e vibra tor - loudsp eaker stimulus - click (user-selecta ble from choi ces of 50, 100, 150, and 200 use) tone bur st (frequenci es 2 50 to 8 khz, choice of linear, henning, blackman or gaussian stimulus ramps for tone burst). t one pip speech: /p a/, /ta/, / ka/ ce- chirp, ce-chirp o cta ve bands mas king noise: pink a nd white noise p olarity: alternating , condensation, rar efaction intensity: 0 to 130 db spl or more repetition rates: 0.2 100 depending on modality data points: 256, 512, 1024 or more test protocols - unlimited, the system must support th e creation of user-d efined custom protocols capable of calculating a numeric correlation of t wo selected wavef orms to define simi larity between the collected waveforms objectively. c apable of performi ng weighted and unweighted addition and subtraction of selected waveforms. capable of sep arating abrdata c ollected with altern ating polarity stimu lation into its separate rarefaction and condensationwave form components. system must sup port automatic elec trode switching for singlechannel data collection such thatmanual movement of electrodesin the electrode cable is n ot required to colle ct ipsilateral data when changing the stimulus ear. syst em must be capabl e of applying user- specified post hoc digital filters durin g data analysis. s ystem must suppor t simultaneous revi ew of data frommultiple test sessions for the patient in th e same on-screen d isplay and report to facilitate monitorin g for changes over time. system mustprovide a means o f password-protecti ng thetransducer c alibration values to prevent inadvertent editing by unautho rised personnel. t he system should h ave an option for external direct printi ng of the report data export to hl7 protocols along wit h the facility to pro vide free api the system should have compliance with international regula tory standards of c e,fda, and iso. free period cali bration for the first three years and afte r three years of cal ibration along with amc support for5 years to be provid ed at the national i nstitute of speech a nd hearing com puter supplied alon g with the equipme nt needed to meet t he below requirem ents latest wind ows operating syst em processor whi ch is intel i 7 or hig her with clock spee d > 2.5mhz ram>= 8 gb and stora ge space ssd>= 5 00gb minimum 3 usb portsalong with 1 hdmi, 1eth ernet port warrant y of the computer b e three years mini mum equipmen t should be powere d using 240v 5ohz. the connection s hould be type d the software sup plied along with th e hardware should have the provision for free upgradation if a new version l aunches in the mar ket within the next five ye ars of the ins tallation also provide free software up dation and support as operating syste m upgradation hap pens penalty for thedelay in repair and delivery of the equipment and acc essories. the penal ty amount is calcul ated based on 24 h ours / 48 hours, an d 72 hours and if t he supplierdoes no t deliver the produc t within ten days of issuing the purchas e order, they should be blacklisted., cmc/amc cost a fter the completion of 3 years of warranty period ( 7 yearsof amc)

CTN :45319269

15 Jun, 2026 NA

Bardhaman - West Bengal

Tender For supply of ge (formerly alstom) make numerical (digital) idmt relay with 3 phase over current, earthfault protection with instantaneous tripping, negative sequence protection & broken conductor protection, complete with fault display and recording system & self-supervision facility & 4 nos. programmable led (multi colour) aux volt-24-230v, ac/dc, ct secondary 1a/5a (site selectable). part no. ekp154, motor management relay (draw-out type), with integrated electrical signature analysis for predicting thermal, electrical and mechanical faults like broken rotor bar, bearing failure foundation, looseness and misalignment having detachable color lcd display with in-build wi-fi, temperature, humidity and surge sensor. operating range 40°c to 85°c as per iec60068. ge (formerly alstom)

Central Government And Public Sector

CTN :45140746

29 May, 2026 11.00 Crore

Gautam Budnagar - Uttar Pradesh

Tender For corrigendum : supply of pet- ct 16 slice scanning system (q2)

State Government

CTN :45313896

05 Jun, 2026 6.42 Lacs

Murshidabad - West Bengal

Tender For work for shifting of electrical equipments from old crb to new crb and construction of new crb with boundary wall and other related civil work at raninagar ss switch yard under domkal division wbsedcl - dismantling of existing rtcc pnl from old crb and re-installation the same tyo new crb., removal of existing 1.1kv 4c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., removal of existing 1.1kv 8c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., removal of existing 1.1kv 12c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., re-installation of 30v,100 ah battery from existing crb to new crb, re-installation of 30v, 35 a automatic float cum boost battery charger from existing crb to new crb., re-installation of ac 3-phase 4w (1a) ct/pt operated amr. tri-vector 33 kv feeder meter from old crb to new crb., re- installation of a.c. 3 phase, 3w ct/pt operated amr. tri-vector 11 kv feeder meter from old crb to new crb, re-arranging for installation of data communication system including hardwares & cable with telephone modem, mri for all meters for 33/11kv sub-station having features for lan and remote connectivity along with supply of materials., relaying & dressing of existing healthy portion of 11 kv 3c, 300 sq mm xlpe cable in the new cable trenches., laying of 1.1 kv 185 sq. mm 4c , pvc cable., laying of 1.1 kv 120 sq. mm 4c , xlpe cable., laying of 1.1 kv 50 sq. mm 4c , pvc cable., laying of 1.1 kv 25 sq. mm 4c , pvc cable., laying of 1.1 kv 16 sq. mm 2c , pvc cable., laying of 1.1 kv 10 sq. mm 2c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 185 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 120 sq. mm 4c , xlpe cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 50 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 25 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 16 sq. mm 2c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 10 sq. mm 2c , pvc cable., re-installation of a.c. switch board from old crb to new crb., re-installation of d.c. switch board from old crb to new crb., dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 4 panel (1in +0bc+3out) from old crb and re-installation the same to new crb., erection of switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 8 panel (2in +1bc+5out)., erection of switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 1 panel (0in +1bc+0out) (one buscoupler pnl along with adaptor), dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 3 panel (1in +0bc+2out) from old crb and return to store in good condition., dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 4 panel (1in +1bc+2out) from old crb and return to store in good condition., removal/uprooting & returning of different size of 1.1 kv pvc cable. qty taken l.s amount as not submitted by site office in the list of returnable materials)

Skin Ultrasound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government And Public Sector

State Government