Latest sky lift spares Tenders | Government sky lift spares Tenders

State Government

CTN :45177854

05 Jun, 2026 1.32 Crore

Agartala - Tripura

Tender For corrigendum : dismantling removing from site of existing old lift and providing installation testing and commissioning of new three nos electrical traction type 26 passenger capacity g6 gearless type with machine room passenger cum bed lift in phase wise manner al

corporations/Associations/Others

CTN :45345600

17 Jun, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

CTN :45327260

10 Jun, 2026 4.36 Crore

Thiruvananthapuram - Kerala

Tender For dismantling, supply, installation, testing, and commissioning of 5 nos. passenger lifts and 5 nos. goods lifts in it buildings at technopark phase i campus, trivandrum - dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lifts for nila building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1360 kg, rated speed 2.0 m/s, serving g+7 floors with 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, dcs control, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 680 kg, rated speed 1.5 m/s, serving g+3 floors with 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, fireman operation, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lift, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for gayatri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1500 kg, rated speed 1.0 m/s, serving 4 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for bhavani building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 2500 kg, rated speed 1.0 m/s, serving 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1000 kg, rated speed 1.0 m/s, serving 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory appro

CTN :45154913

11 Jun, 2026 NA

Gonda - Uttar Pradesh

Tender For zonal work in zone no 24 for period ending 30.06.2027. jurisdiction:: gonda (excluding) to risia (including). - all the items of sub head 1.0 (carriage of materials ) as per cpwd dsr 2021 , all the items of sub head 9.0 ( wood and pvc work ) as per cpwd dsr 2021. , supply to semi skilled worker maison, black smith & carpenter for day to day maintenance as per required. (@ rs.918.00 for area 'a', rs.781.00 for area 'b' & rs.650.00 for area 'c') , supply to unskilled worker as per helper with maison, black smith & carpenter for day to day maintenance as per required. (@ rs.827.00 for area 'a', rs.693.00 for area 'b' & rs.556.00 for area 'c') , hiring of jcb machine (in good working condition) for leveling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, jcb machine, machine operator, fuel, etc. the contractor shall arrange road permit for vehicle for all the states of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. payment shall be made for actual working hours at site , additional for running charges for per km running of tractor with trolly. (over item no. ns/4 above , supply and stacking properly for measurement purpose of good quality moorum asper instruction of engineer-incharge in concerned sse(works) store or as required place. the rates isinclusive of royalty, all taxes, lead, lift etc complete. staked moorum to be measured in cum andpayment to be made per cum, after deduction of shrinkage of voids @ 7.5%. , supply and stacking properly for measurement purpose of good quality coarse sand(minimum zone iii ) as per instruction of engineer-incharge in concerned sse(works) store or asrequired place. the rates is inclusive of royalty, all taxes, lead, lift etc complete. staked moorum tobe measured in cum and payment to be made per cum, after deduction of shrinkage of voids @7.5%. , supply and stacking properly for measurement purpose of local sand / pitsand/yamuna sand for filing purposes as per instruction of engineer-incharge in concernedsse(works) store or as required place. the rates is inclusive of royalty, all taxes, lead, lift etccomplete. staked moorum to be measured in cum and payment to be made per cum afterdeduction of shrinkage of voids @ 7.5%. , supply and stacking of unslaked lime as per instruction of engineer-incharge inconcerne sse(works) store or as required place. the rates is inclusive of all taxes, lead, lift etccomplete , supply of synthetic enamel paint in all shades of reputed manufacturer brand as perinstruction by engineer-in-charge at site. , provinding and fixing wall panelling tiles of require size , provinding and fixing pvc false celling of require size. , provinding and fixing designer wallpaper in all colours shadesand design. , ,

State Government

CTN :45305776

03 Jun, 2026 4.23 Lacs

Ernakulam - Kerala

Tender For deposit-plan fund 2025-26 gmc-ekm- renovation works-electrical panels, rising mains, sub panels of 55 nos electrical rooms, lift machine rooms, vertical/power dbs etc of 26 nos buildings-general electrical work

State Government

CTN :45313435

30 May, 2026 1.47 Lacs

Agartala - Tripura

Tender For comprehensive annual maintenance contract camc for 01 one no elevator thyssenkrupp make 10 passenger lift machine no 4005 installed at block1 of new secretariat building capital complex agartala for a period of 06 six months 2nd call

State Government

CTN :45301199

30 May, 2026 86.1 Thousand

Delhi - Delhi

Tender For armo various electrical and mechanical services installed at ambedkar nagar hospital, new delhi (sh supply, installation, testing and commissioning of different elevator switches in lift pit and lift machine room of otis make lifts)

State Government

CTN :45046685

01 Jun, 2026 5.59 Lacs

Faridabad - Haryana

Tender For corrigendum : supply of tyre for aerial work lift platform tyre, 125x406 non- marking. part no. - 1001114466 make: jlg , charges for service engineer deputation for servicing/parts fitment in awlp machine (jlg)

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

CTN :45261985

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneousellaneous scrap - sc cond. miscellaneous type machine and machineray parts and fitting including vertical turret lathe machine in dismental condition, diesel generator set without alternotar,pumping set, host cap,crain parts, long block with accessories, machine gear, cutting chain, cut of lift accessories , machine chain and varrious other machine and machineray parts and fitting with or without n/f attachment. not fit for railway use. remarks - cutting is allowed on conditional basis. if any loss will be found during cutting. it will be recoverd from concern purchaser location- south side of erwb near railway track. in area i lbpl, dbaw , gst-18% ,tcs-1%, hsn-845969 , allocation-20714208

Sky Lift Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government

State Government