Latest sky lift Tenders | Government sky lift Tenders

corporations/Associations/Others

CTN :45236467

30 May, 2026 19.50 Lacs

Junagadh - Gujarat

Tender For corrigendum : manufacturing & supplying of sky lifter under sjmmsvy (udp-88) year-2024-25, at. mangrol, dist: junagadh

CTN :45057581

01 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45311746

30 May, 2026 NA

Panipat - Haryana

Tender For supply of planetary gear box and spares - horizontal foot mounted planetary gear box spares for bagasse elevator make- top gear transmission pvt ltd. model: 3725 hx mounting: foot red ratio: 166.95:1 rated torque: 224424 nm input: solid input power: 55kw/1440 rpm output speed- 8.62 rpm as per drawing no. 110221-2 rev 1 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 2..horizontal foot mounted planetary gear box spares for main bagasse carrier make- top gear transmission pvt ltd. model: 3850 hx mounting: foot red ratio: 154.31:1 rated torque: 285612 nm input: solid input power: 75kw/1440 rpm output speed- 9.33 rpm as per drawing no. 150221-1 rev 0 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 3..gear box for irc no. 3 spares sr. no.-3670hx ratio:- 189:72:1 code no. ffh3670hx189.72408 make-top gear transmission , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 4..gear box for irc no. 1 & 2 spares sr.no. hg-24520 mfg year- march 2021 type- p3-24 10202057 ratio: 225/1 ip rpm 1500 oil gr. iso vg 320 make- premium transmission pvt ltd , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 5.rbc gear box (complete) make- premium transmission sr.no- hgf-81207 mfg year-16.01.2022 type- sxh3-20 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-290 kg , 6..surplus gear box (complete) make- premium transmission sr.no- hgf-81206 mfg year- 16.01.2022 type- sxh3-16 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-164 kg , 7... bc-01 gear box (complete) make- top gear transmission model- 3725hx ratio- 166.95 code no- ffh3725hx166.9571904 sr.no- 21030145 , 8..rav gear box complete make- radicon type- amd 07-5s kw- 0.75 sr.no- 19/347251 rpm- 1450 actual ratio- 75.121 output torque- 334.0 , 9..batch pan mech. circulator gear box complete. sr. no. hgf-77309 type-vb3sa-250 ratio: - 31.4: 1p1 i/p rom: - 1500, type- helical make-premium transmission. , 10..gear box below complete. sr. no. hgf-77309 type-vb3sa-225 ratio: - 31.4: 1p1 i/p rom: - 1500, make-premium transmission. , 11. planetary gear box complete model: 420horgm sr.no: 21037406 ratio: 1459.84:1 make- top gear transmission , 12. magma mixer planetary gear box complete model: 250horgm sr.no. 210374428 ratio: 87.45:1 make- top gear transmission , 13.. lime preparation tank planetary gear box with motor complete in all respect model: 3280 raio: 92.016:1 make- top gear transmission , 14..raw sugar pugmill planetary gear box with drive complete in all respect model: 280horgm ratio: 358.91:1 make: top gear transmission , 15..slat conveyor u type gear box with motor complete in all respect model: a-337 type- u type ratio: 30:1 make: premium , 16.. sugar bag conveyor u type gear box with motor complete in all respect model: u-500 type: u type ratio: 50 make- premium , 17..sugar bag conveyor u type gear box with motor complete in all respect model: u-600 type: u type ratio: 60 make- premium , 18..sugar bag conveyor u type gear box with motor complete in all respect model: u-400 type: u type ratio: 50 make- premium , 19..sugar bag conveyor u type gear box with motor complete in all respect model: u-800 type: u type ratio: 70 make- premium , 20..sugar elevator planetary gear box (one side rotation) with motor complete in all respect model: 2300hbx ratio: 45:1 make: top gear transmission , 21..fbd elevator planetary gear box (one side rotation) with motor complete in all respect model: 3260hbx ratio: 61.62:1 make: top gear transmission , 22..conveyor belt gear box with motor complete in all respect model: 600 vorxgm ratio: 2856.2 make: top gear transmission

CTN :45304195

03 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For online tender for providing 01 no. hiring of vehicle ladder jeep chhota hanthi tata ace with hydrolic ladder capacity 150 kg platform height 45 feet boom lift type sky lift of new model or equivalent of latest model 2026 for maintence ae

CTN :45043512

01 Jun, 2026 19.00 Lacs

Morena - Madhya Pradesh

Tender For purchasing of 09 meter height hydraulic platform sky lift on tata yodhya/mahindra bolero truck/ashok leyland dost chasis as per specification annex-a. for municipal council kailaras distt. morena

CTN :45234090

20 Jun, 2026 18.00 Lacs

Panna - Madhya Pradesh

Tender For purchasing of pickup mounted sky lift payload cap.(kgs.) 1250 kgs max working ht. 9mtr max. outreach 2.5 mtrs. slewing 360 deg displacement (cc) 1478 cc power 7