Latest slack adjsuter Tenders | Government slack adjsuter Tenders

Central Government/Public Sector

CTN :43473768

17 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For terminal connector - terminal connector, l.v. bimetalic terminal connectorfor quad zebra acsr conductor withquad conductor spacing= 150 +/- 5mmon one side and palm connector onthe other side for connector to36 kv bushing as per sketch forlv terminal connector drawing.no.34560053241, l.v. bimetalic terminal connectorfor 4" ips al tube bus terminalwith o/d 114 mm on one side andpalm connector on the other sidefor connector to 36 kv bushingas per sketch for lv terminalconnector drawing.no.34560053241, bi- metalic terminal connector foroip bushing for single acsr zebrato drg.34993050006 rev-03 tostyle-js9006280370

Central Government/Public Sector

CTN :43521856

19 Jan, 2026 NA

Multi City - Multi State

Tender For supply of supply- clamps and connectors - 765kv, 50ka for 1s, 3150a, cb connector suitable for al tube 4.5 inch ips, expansion type , supply- clamps and connectors - 765kv, 50ka for 1s, 3150a, isolator knee type connector suitable for al tube 4.5 inch ips, rigid type , supply- clamps and connectors - 765kv, 50ka for 1s, 3150a, isolator knee type connector suitable for al tube 4.5 inch ips, expansion type , supply- clamps and connectors - 765kv, 50ka for 1s, 3150a, isolator , rigid type connector suitable for quad aac bull conductor with horizontal approach- moving contact sidei.e. pad terminal , supply- clamps and connectors - 765kv, 50ka for 1s, 3150a, isolator , rigid type connector suitable for quad aac bull conductor with horizontal approach- fixed contact sidei.e. stem terminal , supply- clamps and connectors - 765kv, 50ka for 1s, cvt connector suitable for quad bull , supply- clamps and connectors - 765kv, 3150a, bpi connector suitable for al tube 4.5 inch ips, rigid or sliding through type , supply- clamps and connectors - 765kv, 2000a, reactor bushing connector suitable for quad bull , supply- clamps and connectors - 765kv, 3150a, parallel connector suitable for 4.5ips aluminium tube and quad bull , supply- clamps and connectors - 765kv, 1000a, pg clamp suitable for single bull to single bull

CTN :43500624

22 Jan, 2026 NA

Ranchi - Jharkhand

Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficiency level 3 of rating 250 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required . the high voltage bushings (3 nos.) shall conform to is/ iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1180 (part 1) latest.

CTN :42775090

20 Jan, 2026 NA

Kadapa - Andhra Pradesh

Tender For corrigendum : dr. mvr rtpp-stage-ii-em&mrt- procurement of 6.6 kv ht motor/dry typet/f terminal bushing insulators- offer - req- reg.

CTN :43452013

15 Jan, 2026 NA

Ambala - Haryana

Tender For supply of asket axhaust front , edge cutting , bit end rh , gasket , screen filter , plug magnatic , pin master , gasket jockey pully , o ring , clamp , gasket exhaust manifold , element filter , seal dust master , trank link assy , battery terminal , gasket water pump , connection fuel inlet , hose , bushing , manifold fuel supply , elbow on by pass filter , bit end lh , thermostat , element supper lib oil by pass filter , manifold fuel drain , cover fuel pump , gasket connection , connection fuel drain , catridge , oil filter , catridge fuel filter , hydraulic filter , water separator , universal joint , seal cap filter , hose assembly , hose wtr sep to fuel fulter , cap assy , air filter , stud , fuel tank stainer , bib cock , gasket blanking plate , ring retaining , seat , pin , nut cross head

corporations/Associations/Others

CTN :43427018

17 Jan, 2026 15.34 Lacs

Multi City - Karnataka

Tender For procurement of consumable spare parts for annual maintenance of conveyor based road sweeper machine - cylinder conveyor lift, dcc-sm-item-022-asm, turnbuckle, dcc-sm-item-021-spring - ext, main broom, dcc-sm-item-020-plate weldment, drag shoe, lh, dcc-sm-item-019-plate weldment - drag shoe, rh, dcc-sm-item-018-arm weldment- drag shoe, dcc-sm-item-017-oil - hydraulic (vg68), dcc-sm-item-016-breather - hydraulic tank, dcc-sm-item-015-estimated charges for 3 days for per person (including travel, food, stay & conveyance), dcc-sm-item-014-grease multipurpose, dcc-sm-item-013-bearing unit, main broom, dcc-sm-item-012-bearing- 50 mm, 4bolt, dcc-sm-item-011-wear plate weld- drag shoe, dcc-sm-item-010-asm - conveyor lower skirt, dcc-sm-item-009-mandrel broom strips, set (1 set - 18 strips), dcc-sm-item-008-side broom bristles segment asm 40/60 ratio (price for one segment. total 9 segments per sweeper), dcc-sm-item-007-coolant glycol 50% concentration, 50/50 ratio, dcc-sm-item-006-oil- 15 w40, dcc-sm-item-005-kit- oil filter/seal, dcc-sm-item-004-secondary filter element, dcc-sm-item-003-primary filter element, dcc-sm-item-002-fuel filter element, dcc-sm-item-001-kubota engine cartridge, oil filter, dcc-sm-item-047-terminal block - fused, 6 pos, 30a, dcc-sm-item-046-asm - cooler fan, brushless, dcc-sm-item-045-asm - throttle actuator, dcc-sm-item-044-sensor - proximity, dcc-sm-item-043-asm - water pump, dcc-sm-item-042-hyd motor - conv, dcc-sm-item-041-hyd motor, side broom, dcc-sm-item-040-hub asm, main brm, lh, dcc-sm-item-039-asm, manderl ss, strip broom, dcc-sm-item-038-pin - drag shoe, dcc-sm-item-037-bracket - drag shoe stop, rh, dcc-sm-item-036-bracket - drag shoe stop, lh, dcc-sm-item-035-wear plate - lower, conv, dcc-sm-item-034-conveyor chain, dcc-sm-item-033-sprocket - idler, rubber, conv, dcc-sm-item-032-sprocket - toothed, rubber, conv, dcc-sm-item-031-tube -spacer, dcc-sm-item-030-wiper asm - conveyor, dcc-sm-item-029-wiper - 3.12 x 57.7, 4 ply, dcc-sm-item-028-spray tip (brass), dcc-sm-item-027-spray tip (brown), dcc-sm-item-026-spraytip (blue), dcc-sm-item-025-spray tip (orange), dcc-sm-item-024-cable - 3/16 dia x 22.31 lg, dcc-sm-item-023-cable - drag shoe, dcc-sm-item-072-brkt - hinge, conv skirt, rh, dcc-sm-item-071-brkt - hinge, conv skirt, lh, dcc-sm-item-070-pin - conveyor skirt, dcc-sm-item-069-shaft weldment - main broom, dcc-sm-item-068-spring - comp, 2 od x 7 fl, sb, dcc-sm-item-067-hub weldment, main broom, rh, dcc-sm-item-066-collar - conv shaft, dcc-sm-item-065-pin - main brm hub, dcc-sm-item-064-main broom spray bar assembly, dcc-sm-item-063-relay, dcc-sm-item-062-shaft weldment, conv, lower, dcc-sm-item-061-wldmnt- conv shaft, upper, dcc-sm-item-060-holder - relay, dcc-sm-item-059-main broom spray system qrc , dcc-sm-item-058-nozzle body, dcc-sm-item-057-asm - manifold, sb pressure reg, dcc-sm-item-056-kit- conv. bearing, bot, service, dcc-sm-item-055-bushing - drag shoe pivot, dcc-sm-item-054-check valve - 0.5 inch npt pvc, dcc-sm-item-053-kit conveyor lower skirt, dcc-sm-item-052-gasket - nozzle, rubber, dcc-sm-item-051-nozzle cap, dcc-sm-item-050-tachometer, dcc-sm-item-049-heavy duty chain pin, dcc-sm-item-048-bushing - 2.632 od x 3, w/ o-rg grvs, dcc-sm-item-098-switch, momentary/locking, dcc-sm-item-097-adapter, nozzle water spray sb, dcc-sm-item-096-connector female, 3/8 inch bsp- 12mm dia, dcc-sm-item-095-spray nozzle full cone 1/8 inch bspp, dcc-sm-item-094-switch - magnetic, time delay, dcc-sm-item-093-assy solenoid, dcc-sm-item-092-fuse - blade 30a, dcc-sm-item-091-assy pump, fuel, dcc-sm-item-090-assy starter, dcc-sm-item-089-shock absorber - sweeper, dcc-sm-item-088-light asm - work, dcc-sm-item-087-camera monitor- kit, dcc-sm-item-086-potentiometer, dcc-sm-item-085-solonoid driver, dcc-sm-item-084-disc - main broom end cap, dcc-sm-item-083-assy dynamo, dcc-sm-item-082-asm - drag shoe arm, dcc-sm-item-081-hub weldment, sb, dcc-sm-item-080-prefilter, dcc-sm-item-079-cylinder - sb no vent,

CTN :43416596

03 Mar, 2026 NA

Delhi - Delhi

Tender For procurement of spares for an-32 aircraft - rivet, screw, union nut, carbon piles, vibration absorbing coating, bushing, screw, thermocontracting tube, bushing, sealing ring, block, roller, gasket, clamp, safety guard, bracket with screws, resistence coil, panel, spider with nut, clamp, flange, redlight filter, cable (to no. 0510 length 6330 mm), covering (leather artificial), bracket, valve, bolt, angle, block, block, bracket, ball bearing, rod, bracket, strap, seat lower portion, valve, capacitor, axle, holder, casing, sleeve, tube, rh door cover, service bullletin, condenser, anr module, hatch cover plate, pin hinge, terminal block, access cover of hydraulic reservoir filler neck, clamp, radome attachment fittings (lh), cable (up to 0601), insert, elbow, bracket, shackle, sleeve, gasket, bushing, crosspiece, bolt, pull up light, panel, digimatic hole test, resistance coil, bracket, panel, panel, micro switch (v), driving element,upper, roller, fuel tank no. 6 rh, bolt, steel pipeline, insert (pinoplast), spring, wide angle peep hole with flap, splinted coupling with transmission shaft, hatch cover plate, bracket, lh, pipeline, lh hatch cover, pipeline, shim, insert (pinoplast), insert (pinoplast), electric valve

State Government

CTN :43233019

13 Jan, 2026 11.10 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of 11kv and 33 kv outdoor oil cooled metering unit (combined ct and pt set) under south andaman division sub-division - supply of 11kv & 33 kv outdoor oil cooled metering unit (combined ct & pt set) under south andaman division sub-division., 11kv outdoor oil cooled ctpt combined unit 50hz three phase six bushing typewith three no. ct and one no. three phase vtwith hv neutral broughtout andearthed ilv 12/28/75 kvp ins class a, ref std refstd is16227- 1&4ct specification:ratio 80-40/5a class 0.5 burden 15va isf=7.5@ 40a stc 4ka time: 1 sec.vt specification:ratio 11kv/110v class 0.5 burden 100va voltagefactor 1.2 continuous/1.5 for 30 seconds vectorgroup/connection star/star (ynyn0). terminals: brass stud typeprimary terminals m12 in size with nut, plainwasher, spring washer & check nut. withoutterminal connector. minimum creepage distance25mm/kv.note :primary neutral to be solidly earthed.finish: tank painted colour shade 631 as peris5., 33kv outdoor oil cooled ctpt combined unit 50hz three phase six bushing type with three nosct and single nos three phase vt with hvneutral brought out and earthed ilv 36/70/170 kvpins class a ref std is16227-1&4.ct specification:ratio 25/5a class 0.5 burden 15va isf=7.5 stc4ka time :1sec.vt specification:ratio 33kv//110v class 0.5 burden 100vavoltage factor 1.2 continuous/1.5 for 30 secondsvector group/connection star/star (ynyn0).terminals:terminals: brass stud type primary terminalsm12 with nut, plain washer, spring washer &check nut. without terminal connector. minimumcreepage distance 25mm/kvnote: primary neutral to be solidly earthed.finish: tank painted colour shade 631 as peris5., 33kv outdoor oil cooled ctpt combined unit 50hz three phase three bushing three nos. ctsand one no. three phase vt with hv neutralbroughtout and earthed. ilv 36/70/170 kvp insclass a , ref std is16227-1&4.ct specification:ratio 25/5a class 0.5 burden 15va isf=7.5 stc4 ka time : 1sec.vt specification:ratio 33kv//110v class 0.5 burden 100vavoltage factor 1.2 continuous/1.5 for 30 seconds.vector group/connection star/starterminals:brass stud type primary terminals m12 with nut,plain washer, spring washer & check nut.without terminal connector.minimum creepage distance 25mm/kvnote: primary neutral to be solidly earthed.finish: tank painted colour shade 631 as peris5., 33kv outdoor oil cooled ctpt combined unit 50 hz three phase three bushing three nos. ctsand one no. three phase vt with hv neutralbroughtout and earthed. ilv 36/70/170 kvp insclass a , ref std is16227-1&4.ct specification:ratio 25/5a class 0.5 burden 15va isf=7.5 stc4 ka time : 1sec.vt specification:ratio 33kv//110v class 0.5 burden 100vavoltage factor 1.2 continuous/1.5 for 30 seconds.vector group/connection star/starterminals:brass stud type primary terminals m12 with nut,plain washer, spring washer & check nut.without terminal connector.minimum creepage distance 25mm/kvnote: primary neutral to be solidly earthed.finish: tank painted colour shade 631 as peris5., transportation, transit,insurance, packagingcharges

CTN :40437644

13 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - flow meter 510, needle valve 502, pressure relief valve 504, filter element 5 absolute, air pressure regulator 527, pressure reducer valve 503, air pressure gauge 531, pressure gauge 517, pressure gauge 516, pressure gauge 539, pressure gauge 532, pressure gauge 537, pneumatic control valve, auto/manual switch, pneumatic controller, fuel disconnect, filter, module, o-ring, relay, diode, face-seal mating, relay, iso chain, l=61.25 (102 pitches), washer, shoulder ring, screw cap, setscrew (opt to item 90), bushing teflon, seal and retainer s/a, retainer-seal and bearing, washer thrust, seal, plain encased, washer (order nha item 6), rail, washer, flat, screw, screw, cap, socket head, .1380-32 thd x .750 lg, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, subassy, switch (s3) attaching parts, box assembly, connector circ. mount, switch subassy (s4) attaching parts, cylinder, piston, end cap, oil, end cap, air, end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydra ulic flow regulator, label, cap-port s/a, plate cam, name plate, name plate, sleeve, cover, body, shaft, splined, body, assembly, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel-cylinder, mounting flange s/a, pin-cam index, front housing s/a, shaft and bearing s/a, collar-hold down, shaft- internal drive, bushing- spline, spring-helical compression, plate- hold down, spacer, bushing, cup (order nha item-6), actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, gasket, terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), box assy, box assembly, worm, machined, module, connector attaching parts, receptacle, it is a sub-assembly of light control box, switch, micro, relay,2 pdt,type i attaching parts, pin, straight, 0937 dia attaching parts, relay, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), spool and piston subassembly, spool; compensator(matched set order nha item-290), piston, stroking, piston, rate, barrel cylinder, piston, blocking 9matched set order nha), port cap, bearing, cylinder barrel, elbow, flange- mounting, packing, perfor med

Slack Adjsuter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government