Latest slack Tenders | Government slack Tenders

Central Government/Public Sector

CTN :45733090

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rail 52 kg one meter above remarks: 1. kachcha/pakka road is near the lot. no wear and tear has been provided for any scrap rail. 2. delivery shall be made on sectional weight per meter basis only. quantity is physically available. 3. lot no. has been painted on the lot. actual measurement is painted on each rail in meters. cutting of rails above 06 meters is allowed for ease of transportation. 4. quantity as per-ss-11 is 10.996 mts nos.21 r/mtr-211.48 and is physically available at site. 5. stockholder shall be fully responsible for any addition, deletion, alteration and variation after joint inspection 6. fish plates joggled fish plates glued joints and other fitting shall be return to the stockholder. 7. similar scrape materials lying nearby shall not be delivered, only the listed lot shall be delivered. 8. bidders are advised to inspect the lot personally before bidding. no any claim will be entertained after sale of the lot. 9. lot is ok for sale on above observation. stock holder :- sse/p.way/ tuh.

Central Government/Public Sector

CTN :45733091

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rail 52 kg remarks:- 1. kachcha/pakka road is near the lot. no wear and tear has been provided for any scrap rail. 2. delivery shall be made on sectional weight per meter basis only. quantity is physically available. 3. lot no. has been painted on the lot. actual measurement is painted on each rail in meters. cutting of rails above 06 meters is allowed for ease of transportation. 4. quantity as per-ss-11 is 22,063, http://mts.nos.50, r/mtr-424.28, and is physically available at site. 5. stockholder shall be fully responsible for any addition, deletion, alteration and variation after joint inspection 6. fish plates joggled fish plates glued joints, dunnage and other fitting shall be return to the stockholder. 7. similar scrape materials lying nearby shall not be delivered, only the listed lot shall be delivered. 8. bidders are advised to inspect the lot personally before bidding. no any claim will be entertained after sale of the lot. 9. purchaser has to personally visit the site with regard to loading point, size of truck/hydra entry through market place of local area. no claim will be enter ained after sale of lot. 10. lot is ok for sale on above observation. stock holder :- sse/p.way/kyn/ e.

Central Government/Public Sector

CTN :45472885

07 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For corrigendum : supply of 203 mm air brake cylinder with slack adjuster to rdso drg no. sk- 81057, alt.-11 , item-1; and rdso sk. - 81200, alt. - 5, confirming to rdso specn. no. - c-k-013(rev-1) of oct-2012. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45730994

20 Jul, 2026 NA

Itarsi - Madhya Pradesh

Tender For supply of slack adjuster block for slack adjuster assembly(top) as per clw drg. no. 06/4/19/147, alt - 1, sheet 1 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45737563

16 Jul, 2026 NA

Erode - Tamil Nadu

Tender For modified slack adjuster block for wag-9/wag-7/wap-7 locos as per drg.no.sr.dee/rs/ed/mech- 134. note: supply by sources as per clw item id: 2101027 and 2100215 in ireps vendor directory [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45728488

07 Jul, 2026 NA

Trivandrum - Kerala

Tender For auction sale of unserviceable wheel disc,unserviceable gear wheels & shafts,unserviceable broken spring leaves ll , tata & eicher,unserviceable miscellaneous auto parts,unserviceable ft axle -i beam,unserviceable crank shafts , cam shaft ,etc,unserviceable diesel tanks, air tanks,etc,unserviceable brake chamber assemblies etc,unserviceable propeller shafts,etc,unserviceable clutch disc assemblies & brake shoe assemblies,unsericeable clutch assemblies. tt,ll,eicher,etc),unserviceable flywheels,face plate, clutch backe plates etc,unserviceable cylinder liner,unserviceable joint cup & cross parts,unserviceable crown and pinion assay ll and tt (22no),unserviceable slack adjuster assemblies tt,ll,eicher,,unserviceable crown wheels ll &tata,etc,unservicable joint bracket,rusted metal oil and grease barrels 210ltr,scrap castiron turning waste and cast iron powder,unserviceable tt engine 1510

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government And Public Sector

CTN :45438012

04 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of set of sab maintenance gauges as per rdso technical manual g-92 for slack adjuster as perannexure-i and drawings enclosed. make :- adepl/similar. [ warranty period: 30 months after the date ofdelivery ] ]

CTN :45743809

10 Jul, 2026 NA

Goa - Goa

Tender For supply of mfg and sup. of glued insulated rail joints 6.5m long of g3(l) type for 60 kg rails with all fittings as per rdso drg.no.t.2572 with suppliers rails and specification as per manual of glued insulated rail joints with latest alteration. [ warranty period: 30 months after the date of delivery ] ]

Slack Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors