Latest slacked lime Tenders | Government slacked lime Tenders

State Government

CTN :45004686

27 May, 2026 76.00 Lacs

Jummu - Jammu And Kashmir

Tender For bid to ras supply of sanitation items : : - dustbins blue and green capacity 100 litres , liner bags capacity of 50 kg , white slacked lime , black phenyl , acid , naphthalene balls , malathion , thiamethoxam sitara , sodium hypo chloride , gloves disposable blue colour good quality , mask single use , wipers heavy duty , pocha big size , buckets 20 ltrs cello or equivalent , washing powder , hand soap , toilet cleaning brushes , garden swords , drats big , harpic , brooms , brooms with sticks , long shovel with bamboo handle , florescent jacket with jmc logo , plastic mug , grub hoe kayee , iron panja with long bamboo handle , room freshner odonil , steel wheel barrow , wooden wheel barrows , wireless speakers with mic

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Central Government/Public Sector

CTN :45270462

10 Jun, 2026 20.50 Lacs

Bangalore - Karnataka

Tender For supply of upvc gate valve , 1 inch upvc gate valve , 1 inch cpvc nrv , health faucet ptmt , health faucet ss , shower ss , shower rose , connection pipe pvc , connection pipe hot cold , flush tank , flush tank ball cock as per sample 7 types , syphon set for flush tank as per sample 7 types , wall mounted w ccover as per samples , washing machine tap , washing machine adaptor , gerberit flush tank push plate as per sample , divertor inside fitting for mixer as per samples , pillar cock spindle as per sample jaguar , wall mixture , two in one bib cock brass , two in one angle cock brass , spindles half round ceramic , grating with hole ss , cp nipple , three by four inch cpvc pipe , three by four inch cpvc collar , three by four inch cpvc elbow , three by four inch cpvc union , three by four inch cpvc tee , three by four inch 1 inch cpvc bush , three by four inch cpvc shoe , three by four nch cpvc mta , three by four inch cpvc fta , three by four inch cpvc end c ap , 1 inch cpvc pipe , 1 inch cpvc collar , 1 inch cpvc elbow , 1 inch cpvc union , 1 inch cpvc tee , 1inch 1 and one by four inch cpvc bush , 1 inch cpvc shoe , 1 inch cpvc mta , 1 inch cpvc fta , 1 inch cpvc end cap , 1 and half inch cpvc pipe , 1 and half inch cpvc collar , 1 and half inch cpvc elbow , 1 and half inch cpvc union , 1 and half inch cpvc tee , 1 and half inch 1 and one by four inch cpvc bush , 1 and half inch 1 inch cpvc bush , 1 and half inch cpvc shoe , 1 and half inch cpvc mta , 1 and half inch cpvc fta , 1 and half inch cpvc end cap , 2 inch cpvc pipe , 2 inch cpvc elbow , 2 inch cpvc union , 2 inch cpvc tee , 2 inch cpvc mta , 2 inch cpvc end cap , cpvc solvent tin 137 ml , tefflon tape , waste coupling , waste pipe , sink coupling , cpvc brass fta half inch three by four inch , cpvc brass mta half inch three by four inch , cpvc brass elbow fta half inch three by four inch , cpvc brass elbow mta half inch three by four inch , cpvc brass tee half inch three by four inch , 2 inch upvc pipe , 1 and half inch ss nails , three by four inch plumbing sadles , 1 inch plumbing sadles , 1 and half inch plumbing sadles , 2 inch plumbing sadles , door bend 2 and half inch pvc , door tee 2 and half inch pvc , collar pvc 2 and half inch , monkey spanners big small sizes , pipe wrinch 12 inch 16 inch , combination plier , nose plier , udjustable spanner , wooden gatta 1000 nos each pocket , screw driver small big , concrete drilling machine , granite drill bit 19mm 25mm , 1 and half hp pressure pump , 1 and half inch hdpe mta , 2 inch upvc collar , 2 inch upvc union , 2 inch upvc mta , 2 inch upvc elbow , upvc solvent , telephone shower 1and half mtrs with stand , 1 inch hose clamp , 1 inch hose nipple

Central Government/Public Sector

CTN :45247239

08 Jun, 2026 16.50 Lacs

Aizawl - Mizoram

Tender For supply, installation, testing, commissioning of rotating hollow granite ball fountain at mizoram science centre, aizawl at berawtlang, aizawl

State Government

CTN :45081420

18 May, 2026 NA

Shivpuri - Madhya Pradesh

Tender For tender for construction items - sand, black gitti 20 mm, black gitti 40 mm, khanda boulder 9*9*9, white gitti 20 mm, white gitti 40 mm, bricks (open bhatta) (20x10x10 cm), bricks (kanpur no 1) (20x10x10 cm), fly ash bricks (20x10x10 cm), iron tmt saria (6 mm), iron tmt saria (8 mm), iron tmt saria (10 mm), iron tmt saria (12 mm), iron grill/gate/window/door (constructed) as per design, murrum, centering suttring rent, acrylic distemper (isi mark), plastic emulsion paint (isi mark), oil bound distemper (isi mark), cement primer(isi mark), oil paint (isi mark), wall putti(isi mark), pvc coated copper cable1mm (isi mark), pvc coated copper cable1.5 mm (isi mark), pvc coated copper cable 2.5 mm (isi mark), 3 pin socket (isi mark), 5 pin socket(isi mark), power plug (isi mark), switch (isi mark), holder (isi mark), ceiling rose (isi mark), mcb (isi mark), main switch isi mark, pvc board 4 x4 isi mark, pvc board 8 x4 isi mark, pvc board 12 x4 isi mark, pvc casing isi mark 0.5 inch, pvc casing isi mark 1.0 inch, pvc condul tl socket 0.5 inch isi mark, ceiling fan 48 inch isi mark, fan regulator, tube light complete isi mark, cfl 10 watt isi mark, led 10 watt isi mark, led 5 watt isi mark, cement grade 33 (isi mark), cement grade 43 (isi mark), cement grade 53 (isi mark), vitrified tiles 60cm x 60cm, ceramic floor tiles 30cm x 30cm, ceramic wall tiles 30cm x 45cm, door & window frames made of wood from sal, bija, saku wood, panels for doors & windows veneered plate pressed three layer grade wood article board (isi 3097) grade-1, granite 20mm, zigzag pcc paver block 75mm thickness & minimum height 200 mm. colour as per required, urinal pot complete, washbasin complete, kitchen sink complete, stone dust, aluminum frame with glass, european pattern toilet sheet flush, cistern, water storage tank 500 ltr (isi mark), water storage tank 1000 ltr (isi mark), steel tap 0.5 inch, steel tap 1.0 inch, pvc pipe (isi mark) 0.5 inch, pvc pipe (isi mark) 1.0 inch, pvc pipe (isi mark) 2.5 inch, pvc pipe (isi mark) 4.5 inch, pvc tee (isi mark) 0.5 inch, pvc tee (isi mark) 1.0 inch, pvc tee (isi mark) 2.5 inch, pvc tee (isi mark) 4.5 inch, pvc elbow (isi mark) 0.5 inch, pvc elbow (isi mark) 1.0 inch, pvc elbow (isi mark) 2.5 inch, pvc elbow (isi mark) 4.5 inch, pvc socket (isi mark) 0.5 inch, pvc socket (isi mark) 1.0 inch, pvc socket (isi mark) 2.5 inch, pvc socket (isi mark) 4.5 inch, pvc ball (isi mark) 0.5 inch, pvc ball (isi mark) 1.0 inch, pvc ball (isi mark) 2.5 inch

CTN :44925811

14 May, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of lpg work e e - sitc of lpg cylinder adaptors , sitc of gi lpg pipeline installation , sitc of suraksha lpg hose , sitc of gas pressure gauge , sitc of non return valve , sitc of gi ball valves , sitc of three burner stove , sitc of lpg regulator , sitc of cylinder manifold cage , sitc of flexible ss pigtails , sitc of sitc of manifold header pipe , sitc of sitc of cylinder connecting nipples , sitc of pilot line with isolation valve , sitc of gas flow meter optional , sitc of exhaust fan , sitc of auto-clean chimney , sitc of inline duct fan , sitc of exhaust fan louver , sitc of gi ducting , scaffolding , four number ms steel table top finished by granite stone ) /bid number : gem/2026/b/7447123 * /dated: 17-04-2026 & & / bid document 1 / 24

Central Government/Public Sector

CTN :45002749

16 May, 2026 1.22 Crore

Jaduguda - Jharkhand

Tender For annual civil maintenance and development works in ucil housing colony jaduguda for one year d d - earth work in excavation , filling available excavated earth , filling in plinth with sand , dismantling old plaster , demolishing cement concrete , cleaning jungle , demolishing brick work , plain cement concrete 1 isto 3 isto 6 , plain cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1 5 isto 3 , steel reinforcement , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , 25mm thick cement concrete flooring , the overhead tank , asbestos cement sheet , g i sheet in roofing , structural steel work , 35mm thick isi marked flush door , 24 mm thick factory made pvc door shutters , white washing , water proofing cement paint , premium acrlic smooth exterior paint , white cement based putty , acrylic emulsion paint , cleaning of overhead water tank , renewing glass panes , paver block , vitrified tiles , ceramic glazed wall tiles , orissa pattern w c pan , european type w c pan , white vitreous china wash basin , vitreous china wash basin , mirror of superior glass , flushing cistern , low level cistern , pedestal type w c pan , 15 mm bided or jet spray , c p brass shower rose , c p brass angle valve , brass stop cock , close hole wall mixer tap , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , 75 mm plain bend , 100 mm plain bend , 15 mm g i pipes , 20 mm g i pipes , 15mm normal bore g i union , 20 mm normal bore g i union , c p brass extension nipple , p v c waste pipe 32 mm dia , c p brass bib cock , brass bib cock , brass extension nipple , ball valve , renewal of old putty , excavating trenches , surface dressing , transportation of excavated earth , foundations or footings or bases of column etc. for mass concrete , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , water proofing treatment , synthetic enamel paint , cement primer , chain link , 18 mm thick granite

CTN :44345613

30 Apr, 2026 3.5 Thousand

Bengaluru - Karnataka

Tender For corrigendum : procurement of machinery and equipment - inside caliper (divider)150, machine .brushes., bench. brushes., file,brushes., hacksaw .frame fixed 300mm., needle .file set., knurling .tool straight & diamond cut., hss .centre drill dia 8 mm., hss .centre drill dia 3.0 mm., hss .counter sink bit 120 degree., hss die .m4 - m12 with die stock., hss drill bit .straight shank dia 3 to 12 mm (step of 0.5 mm) (set)., goose neck .clamp set., strap .clamp set., machine .vice 150 mm (drilling)., self centering drill chuck 12 .mm., bench .grinder., dia .indicator - 0.01mm with styallus (needle type)., radius .gauge from 7.5 -15mm., thread .pitch gauge metric & inches., surface .plate granite 600 x 600 x 80 mm with stand., number .punch 5 mm set., pillar drilling. machine., cnc .simulators., outside .caliper (divider) 150, hammer .cross peen 0.75 kg with handle, flat .chisel, hss hand .hacksaw blade 18 tpi, magnetic .v block, rotary .table, sleeves .mt 3, sleeves .mt 2, sleeves .mt 1, materail .handling equipment, feeler .gauge 0.05 to 1.0 mm, radius .gauge upto 7mm, vernier .bevel protractor, universal .magnetic dial stand, outside .micrometre 25-50 mm, outside .micrometre 0-25 mm, dial .vernier 150 (0.02 lc), digital .vernier 0 - 150 mm, vernier .caliper 0 - 200 mm, vernier .caliper 0 -150 mm, vernier .height gauge 300 mm, center .punch, scriberr, try .square 4 inch blade, divider .spring type -150 mm, cnc cylindrical grinding machine., tool presetter , hydraulic vice - l- 525 x w- 108 x 135mm , opend 175mm, lathe dog carrier - bent tail 2 , lathe dog carrier - straight tail 2 , inserts type shell end mill dia 63mm with inserts (30nos.) 3 box., solid carbide end mill four flute dia 12mm , solid carbide end mill four flute dia 10mm , solid carbide end mill four flute dia 8mm , solid carbide end mill four flute dia 6mm , solid carbide end mill four flute dia 5mm , solid carbide end mill four flute dia 4mm , ball peen hammer 250 gms & 500 gms, warding file smooth 6 , knife edge file smooth 6 , knife edge file smooth 8 , knife edge file second cut 6 , knife edge file second cut 8 , knife edge file second cut 10 , half round file smooth 6 , half round file smooth 10 , half round file second cut 6 , half round file second cut 10 , half round file second cut 12 , half round file bastard 12 , round file smooth 6 , round file smooth 10 , round file second cut 6 , round file second cut 8 , round file second cut 10 , round file second cut 12 , round file bastard 12 , triangular file smooth 6 , triangular file smooth 8 , triangular file second cut 6 , triangular file second cut 8 , triangular file second cut 10 , triangular file bastard 10 , square file smooth 6 , square file smooth 8 , square file second cut 6 , square file second cut 8 , square file second cut 10 , square file bastard 12 , hand file second cut file 10 , flat file rough 12 , flat file smooth 8 , flat file smooth 10 , flat file second cut 8 , flat file second cut 10 , flat file second cut 12 , flat file bastard 12 , convex milling cutter dia 63 x 6 radius x bore size dia 27 mm., concave milling cutter dia 63 x 6 radius x bore size dia 27 mm., t slot cutter with parallel shank dia 17.5x8mm width shank dia 8mm, hss parallel shank end mill dia 16 four flute, hss parallel shank end mill dia 12, hss parallel shank end mill dia 10, hss parallel shank end mill dia 8, hss parallel shank end mill dia 6, hss tool bit 1 x 1 x 6 - 8% cobolt, hss tool bit 3/4 x 3/4 x 6 - 8% cobolt, hss tool bit 1/2 x 1/2 x 6 - 8% cobolt, hss tool bit 1/4 x 1/4 x 6 - 8% cobolt, flat slab oil stone 25 x 52 x 150 mm, hss centre drill dia 4.0 mm, hss machine reamer ( straight shank)dia 6 - 10 mm., hss hand reamer with wrench - dia 6 - 10 mm, power hacksaw machine with blade (10nos.)., hss tap set for size m4 - m12 with wrench (set) & core drills for the above tap set, taper shank hss drill dia 20mm, taper shank hss drill dia 16mm, taper shank hss drill dia 14mm, clamp c 10 , clamp c 5 , too

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Slacked Lime Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector