Latest slate Tenders | Government slate Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45546039

31 Jul, 2026 NA

Howrah - West Bengal

Tender For corrigendum : supply of form no. op/rs-54/mech.t-23. txr daily register of deficiency found. book of 100 leaves. 1)unit- number of books, 2)size-215x305mm, plus/minus 5mm, 3)printing paper- white map litho 60 gsm, i.s no. 1848/part(1)2018. 4) printing-both side in black ink, printing matter to be collected from consignee, 5)binding- centre two stitching by 20 gauge wire with brown kraft paper cover of 110gsm of i.s no 1397/90 grade-ii (mg), 6)sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent poly propylene foil orbag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. if any. special condition:-quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45728603

15 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of comm/l-42 ( wagon seal level) (trade) 1. size:( 7.5 cms x 12.5 cms plus/minus), portrait. 2. unit: 1 leaves (loose). 3. numbering: nil. 4. printing: both side in black ink.5. text: bilingual ( hindi & english) 6. paper: 275 gsm white pulp board7. cover paper: nil. 8. binding: loose. 9. packing: packing to be made 100 nos ( one hundred) in each bundle.10. proof: it should be approved by consignee orhis authorized representative before final printing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45716565

13 Jul, 2026 1.08 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of spare for stitching machin -looper drive liver assembly for stitching machine model no 80000 dx , shaft for looper rocker stud for stitching machine model no 80000 dx , needle lever ball link for stitching machine model no 80000 dx , feed lift camp with block for stitching machine model no 80000 dx , lopper stand complete holder for stitching machine model no 80000 dx , looper for stitching machine model no 80000 dx , screw set for stitching machine model no 80000 dx , arm shaft for stitching machine model no 80000 dx , bush set for stitching machine model no 80000 dx , connecting stud complete for stitching machine model no 80000 dx , pressure foot assembly for stitching machine model no 80000 dx , crank for feed shaft connection for stitching machine model no 80000 dx , thread tension assembly for stitching machine model no 80000 dx , rocker for looper drive lever shaft for stitching machine model no 80000 dx , looper bar crank rod assembly for stitching machine model no 80000 dx , main crank shaft assembly for stitching machine model no 80000 dx , needle lever assembly for stitching machine model no 80000 dx , needle bar stud connection assembly for stitching machine model no 80000 dx , main housing with bearing for stitching machine model no 80000 dx , liver for looper drive ecc for stitching machine model no 80000 dx , assembly for needle liver bar for stitching machine model no 80000 dx , return roller for slate conveyer , return roller with shaft for slate conveyer , counter sunk screw complete 1/4 inch x 1 1/2 inch , slate complete for slate conveyer , return roller shaft with coller , throat plate for stitching machine model no 80000 dx

CTN :45714930

13 Jul, 2026 2.00 Lacs

Nanpara - Uttar Pradesh

Tender For supply of spares for sugar bag stacker wooden slates , ms roller id 20mm od 30mm for stacker , ms slate complete with roller type 1 , ms slate complete with roller type 2 , carriage bolt 3 bata 8 inch x 2 point 5 complete with nut and washer , ms washer id 20mm od 25mm for stacker , split pin 1 bata 8 inch x 1 point 5 inch , spares for slate conveyor foot switch element , chain for slate conveyor , driving chain , ms slate , return roller shaft complete , sprocket 07 teeth , sprocket 16 teeth , return roller , counter sunk screw , end bracket driving side , end bracket rear side

CTN :45732503

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of spares for sugar bag slate conveyor and grader -return roller for conveyor ,collar for return roller ,shaft for end bracket (small) ,shaft for end bracket (big) ,end bracket ,roller (nylon) dia. 22mm ,split pin for shaft roller ,rivet for roller with hole ,spare for sugar bag stacker make of sugar ,stacker: munish industries ,m.s slate with side roller for stacker conveyor ,bevcon sugar grader (bw sz -30-6d). ,cardan shaft - 630mm close length ,inter mediate cardon shaft -1400 mm close length ,rubber v- seal

CTN :45732639

15 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For quotation for instructions for stationery/computer material envelopes surf 11x5 (saarn mahal company) , ritkake white 9x4 ish (swarna mahal company) , nicarf white 6x3.5 ith (swarg mahal company) , nika yellow laminated 12x18 it (hominated/lining) , envelopes yellow laminated 10x12 ith (laminated/lined) , envelopes yellow laminated 9x10 ith (laminated / bastar) , nikapi brown 11x5:3 (with inward-outward section) , gems clip plastic cote good quality , braffis file folder with transparent steel clip , l follower kite a size plastic , office file bag (button collar) , kyle cover min wale, jay jambudip , silp peth kaldar/phone no. 03 batha size jambudeep 100 pages , slip pad kalwar / plain no 01 small size jambudim 10 pages , feisty batha sign chorus camel 0 , gumtube 30 ml chorus/camat , gum baudal chorus kaisa apni (150 ml) , permanent marker pen , pilot pen hi-07 , ecangel pen, ecangel company , parcel paper brown paper , ordinary use and shree pan, alcoz , ballpen (rorito) , sally tep. eb. 30 m , packing tape brown tape itchi , celli tape, 2 inches 30 meters , page marker in plastic seat color , page marker paper shot , stapler after 24/6 core , stapler small 10 no. chorus kagaru kapati , stapler min bahi. 2440 koras kagaru kath , stapler mini small 10 nos. cores , register ruler 96 page 17274 orient paper , register fruitful 240 pages 17274 orient paper , scissors (medium size) , shorthand mot book 200 pages , water sponge ordinary/superior , pencil black per piece packet (camlin/nataraja/domes) , pencil red blue , ashoka corus increases stamp penetration , stamp pad ek, 30ml chorus and others , file tag green 36 hechi , file deg white small ones , poker wooden , highlighter luxor and others , paper cutter/slate , alpine bell , whitener correction pen , computer address sticker , twine per kg , duster cotton , bags cotton/khadi 1x1 meter

CTN :45727615

20 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of s-10 s ( challan for stores).) 1. a-5 ( 15.2 cms x 21.5 cms plus /minus 0.5 cms), portrait. 2. unit each books of 100 leaves. 3. numbering nil 4. printing: one side black ink. 5. text: bilingual ( hindi & english). 6. paper: 70 gsm white map litho paper. 7. cover paper: 110 gsm azurlaid paper. 8. binding: two wire stitches at head with cover.9. packing: packing to be made 20 books ( twenty) in each bundle.10. proof: it should be got approved as well as 1(one) dummy book should be approved by consignee or his authorized representative before final printing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45703781

17 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of upgradation fabrication and refurbishment of conference room with all associated accessories-, slate size: 18 x 18 inches, thickness of slate: 03 mm, slate base: polyfiber, colour: naturally slated teak wood finish, ingredients - recycled rubber crumb and polymer - voramer rr-1009, characteristic-shock absorbent and anti skid, . specific feature: water repellant and scratch resistant, provisioning of over head partition boards for conference room, , aluminum frame paneling for over head structure. area: -288 sq.ft, over head partition boards-288 sq.ft, cooler warm white energized shades with a kelvin range of 2200 k to 6500 k. quantity: 04 nos, moisture absorbent anti odour fragranced overlay coating, temperature control unit with moisture controller and all associated accessories, specifications and performance parameters:, capacity: 2 ton, type of indoor: cassette, voltage/frequency / phase: 380-415v/50 hz/3 phase, compressor type: dual rotary, refrigerant: r 32, -nominal capacity (tr) as per bee: 3 tr, -noise level indoor (high/medium/ low) in db(a): 57.5/53/50.2, - moisture removal (litres/hour): 5.2, cooling capacity (btu/hr): 35997, - ambient temp (cooling)°c: 52°c, 840 x 245 x 840 idu dimension (wxhxd) mm, idu grill dimension (wxhxd) mm: 1020 x 50 x 1020 user interface - lcd remote with night glow function

State Government

CTN :45686814

11 Jul, 2026 15.00 Lacs

Neemuch - Madhya Pradesh

Tender For supply of cleaning material and electrical items supply - coconut oil, mustard oil, laundry soap (90g, good quality), washing powder (50g, good quality), bath soap (75g, good quality), branded toothpaste, tongue cleaner (plastic), toothbrush, whitewash lime, yellow clay/soil, red ochre (*geru*), whitewash brush, toilet cleaner, phenyl, earthen pot with lid, bamboo broom, date-palm broom, latrine cleaning brush, plastic mug (2-liter capacity), latrine bucket (10-liter capacity), oil paint (all colors), plastic paint, turpentine oil, cement bag (50 kg, branded), ceramic tiles (2x2), paving blocks, river sand, bricks, latrine pan (large/squat type), stone aggregate (1/3 inch), stone aggregate (zero size), large painting brush, cutting scissors, razors, shaving blades (super max), shaving cream (vizyon, 200g), led bulb (9-watt), bulb holder, flexible wire bundle, tape roll, led street light (100-watt, branded), led street light (50-watt, branded), led bulb (50-watt, branded), tubelight (40-watt, branded), complete tubelight set (40-watt, branded), led bulb (15-watt, bajaj), aluminum wire bundle (7/20, branded), tubelight starter (branded), rechargeable led bulb (18-watt, philips), children's mosquito net, photocopy paper (a4 size, branded), lace (large/thick size) stamp pads (small & large), stamp pad ink (30 ml), branded calculators (small & large), staplers (small & large), stapler pins, t-shaped pins, printer toner/ink, branded printer cartridges, medium-sized files, glue bottle, file pads, liqui-flow pens (blue & red), pen refills (large, blue & red), keyboard, mouse, intercom telephone instrument, slate, chalk, writing pen, notebook (100 pages), register (200 pages), register (100 pages), cash book (large), ledger book, contingent register, iron angle, nails (small & large), screws (small & large), iron sheet, mosquito mesh/net, welding rod

Slate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government