Latest slaughter house service Tenders | Government slaughter house service Tenders

State Government

CTN :41032953

26 Jul, 2025 4.25 Lacs

Ashoknagar - Madhya Pradesh

Tender For work of sealing lifting of penstock gate stop log gates and dt gates with arrangement of divers and consumables at rajghat hps mppgcl chanderi

corporations/Associations/Others

CTN :41015421

24 Jul, 2025 NA

Fatehpur-Up - Uttar Pradesh

Tender For the work of transporting 200 nos. of single phase/three phase approximately 10 box meters, polycarbonate seal and sealing certificate book from electrical storage centre, fatehpur to electrical testing section-fatehpur by vehicle under kampse and dismantling, electrical testing section, fatehpur. after checking the old meters, the work of transporting about 01 tonne of meter spares from electrical testing section, fatehpur to electrical storage centre, fatehpur by vehicle. note- in completion of the above work, if any work is not mentioned in the boq and it is required to be done, then it will be done by the contractor without any other expense.

State Government

CTN :40987932

21 Jul, 2025 NA

Karur - Tamil Nadu

Tender For online steam leak sealing work in cbfl cd digester at pulp mill mechanical in tnpl unit-i

State Government

CTN :40966864

30 Jul, 2025 17.65 Lacs

Kheda - Gujarat

Tender For work of on-line leak sealing services for high temperature & pressures valves, lines etc. for unit no. 1 to 7 at wtps on as & when required basis.

State Government

CTN :40859983

25 Jul, 2025 1.68 Lacs

Gorakhpur - Uttar Pradesh

Tender For work of providing and fixing of lighting materials for lighting arrangement and other associated work at 132 kv s/s deoria under etd, deoria - providing and fixing of hpsv sodium lamp single phase , 250 watt bajaj / havells / crompton / phillips make fitting in single piece cast aluminium body on complete in all respect with lamp of category "a"., laying of control cable ( to be provided by the department free of cost) in switchyard and from junction box to fitting., providing junction box as per size 250x250x150 mm made of ms sheet 16 swg in side mounting the channel with 2 nos. hrc fuses and 2 nos. tb4 way type and 1 no. mcb , 2 nos. cable gland size to control cable gland front side locking / sealing arrangement and painted one coat of synthetic enamel smoke gray paint ., fixing of junction box size 250x250x120 mm on each other gantry excluding cost of junction box., supply and fixing of gi bend pipe of 35 mm dia b class 2 meters long and bended at one end by quarter circle in 0.5 meter for cable entry to junction box fitted on colimn., providing and fixing of clamp for fixing of gi bend pipe at top of column. termination of cable 2cx 2.5 mm sq. cable at each lighting junction box., ternination of cable 2cx2.5 mm sq. cable at each lighting junction.

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

Central Government / Public Sector

CTN :40957061

25 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply and installation pipe sealing arrangement type-4 suitable for one lavatory of lhb non ac coaches to icf drg. no. icf/std-6-3-122, alt-b item no.4 and as per rdso specn. rdso/2008/el/spec/0 067, rev-03 or latest, installation shall be done by the supplier as per scope of work enclosed in annexu re. [ warranty period: 42 months after the date of delivery ]

State Government

CTN :40915729

22 Jul, 2025 24.00 Lacs

Kheda - Gujarat

Tender For work for alignment of roof tubes & complete sealing of pent house in bmd-ii at wtps.

Central Government/Public Sector

CTN :40904226

21 Jul, 2025 NA

Mumbai - Maharashtra

Tender For work of supply and installation of cable transit entry sealing & foolproof protection system with multi diameter halogen free epdm modules to prevent rodent entry into ht compartment of switch board cabinet of eog type lhb ac coaches, power car & pantry car of mail/express trains of ltt depot of mumbai division

State Government

CTN :40891252

14 Jul, 2025 NA

Parli - Maharashtra

Tender For work of in-situ repair of coal mill xrp-903 bowl hub lower portion by machining and split sleeve fitting & upper sealing area machining during aoh at unit-8 1x250mw bm-tps parli-v.

Slaughter House Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors