Latest sleeper scrap Tenders | Government sleeper scrap Tenders

corporations/Associations/Others

CTN :45321260

01 Jun, 2026 NA

Khandwa - Madhya Pradesh

Tender For auction sale of u/s mild steel scrap,u/s bearing scrap,u/s coal pipe and bend with ceramic lining scrap,u/s ms scrap burner with s.s tip,u/s brass scrap (90kg),u/s insulated wire/cable aluminium scrap,u/s regulator/socket/lighting item (miscellaneous) scrap,u/s fan electrical scrap,u/s choke scrap,u/s mixed conveyor belt scrap(cut piece),u/s ct 400kv scrap

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

CTN :45203461

04 Jun, 2026 10.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of elctric item coolar repair and others items - supply of electric item, supply coolar, and plumbering item, repairing work and other item, desert cooler (iron body) complete 90 100 liters, desert cooler (fiber body) complete 90 100 liters, desert cooler (iron body) complete, 70 80 liters, desert cooler (fiber body) complete, 70 80 liters, room cooler (iron body) complete, 40 50 liters, room cooler (fiber body) complete, 40 50 liters, cooler motor (copper winding), all capacity, cooler pump, all capacity, cooling pad (wood wool / honeycomb), fan blade / cooler fan, air deflector / front grill (jali), motor stand / clamp, bearing (motor/fan), capacitor, belt (if applicable), water tank repair / replacement, float valve, drain plug, overflow pipe, water distribution pipe system, switch board with regulator, electric wiring work, mcb / fuse protection, earthing wire, 3 pin plug top, wheel / stand, iron body repair (welding, painting), fiber body repair (crack fixing), installation charges (new cooler), transportation charges, complete servicing (cleaning, repair, testing & commissioning), old cooler repair (complete overhauling) per unit, disposal of scrap / old parts, warranty on parts & service minimum 1 year, new cooler technical specification (air delivery, power, copper motor), rate inclusive of all taxes, ceiling fan new, 48 inch / 1200 mm, wall fan new, 16 inch / 400 mm, ceiling fan motor, wall fan motor, fan blade (ceiling/wall), capacitor (fan), fan regulator, oscillation mechanism (wall fan), fan guard / grill (wall fan), down rod (ceiling fan), shackle / clamp kit (ceiling fan), fan wiring & installation, fan repairing / servicing (complete), bearing replacement (fan), fan cleaning & overhauling, pvc pipe 1 inch, pvc pipe 1.5 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4 inch, pvc elbow 1 inch, pvc elbow 1.5 inch, pvc elbow 2 inch, pvc elbow 3 inch, pvc elbow 4 inch, pvc tee 1 inch, pvc tee 1.5 inch, pvc tee 2 inch, pvc tee 3 inch, pvc tee 4 inch, pvc socket 1 inch, pvc socket 1.5 inch, pvc socket 2 inch, pvc socket 3 inch, pvc socket 4 inch, pvc reducer 1x inch, pvc reducer 2x1.5 inch, pvc bend 2 inch, pvc bend 3 inch, pvc bend 4 inch, pvc door tee 2 inch, pvc door tee 3 inch, pvc door tee 4 inch, pvc p trap 1.5 inch, pvc p trap 2 inch, pvc floor trap 4x4 inch, pvc floor trap 5x5 inch, pvc nahani trap standard size, pvc end cap 1 inch, pvc end cap 2 inch, pvc end cap 3 inch, pvc end cap 4 inch, pvc pipe clamp all sizes, pvc solvent cement 100ml, pvc solvent cement 250ml, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, cpvc female adapter inch, cpvc female adapter inch, cpvc male adapter inch, cpvc male adapter inch, cpvc brass elbow inch, cpvc brass tee inch, cpvc ball valve inch, cpvc ball valve inch, cpvc ball valve 1 inch, cpvc tank nipple inch, cpvc tank nipple inch, cpvc tank nipple 1 inch, cpvc pipe clamp all sizes, cpvc solvent cement standard, bib cock tap inch, pillar cock tap inch, angle valve inch, concealed stop cock inch, sink cock standard size, swan neck tap standard size, ptmt tap inch, brass tap inch, shower set standard size, health faucet standard size, jet spray set standard size, connection pipe 18 inch, connection pipe 24 inch, connection pipe 36 inch, waste coupling standard size, bottle trap 1.25 inch, flush valve standard size, western commode standard size, indian toilet seat standard size, wash basin standard size, urinal standard size, cistern tank 5 liter, cistern tank 10 liter, pvc flush pipe standard size, seat cover standard size, basin waste pipe 1.25 inch, mirror standard size, soap dish standard size, towel rod standard size, water tank 500 liter, water tank 1000 liter, water tank 2000 liter, ball valve inch, ball valve inch, ball valve 1 inch, tan

Central Government/Public Sector

CTN :45248671

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - released unservicable 60 kg psc sleeper one sleeper steel weight = 15 kg approx qty. 2760 nos. 41.400 mts tms lot no. bpl/sse/pw/bpf/scrap psc sleeper/25/25-26 dt 19.12.2025 note: 1. delivery given by number, handover is allowed for breaking, after breaking the sleepers debris should be cleared by the purchaser released steel wire&inserts will be effected as per rly.bd.letter dt-18.06.19. 2. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible.. 3. it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot.. 4. the purchaser will be responsible for the safety of his labour and other staff in railway premises.. 5. the purchaser will be responsible for any loss or damage of railway property wheather due to his negligence or otherwise during breaking the sleepers and delivery.. 6. similar and other type of p.way materials laying near by lot will not be delivered.. 7. psc sleeper scrap class standard weight of steel only.. 8. material can be moved by road within a lead of 30 mtrs. from stacking point.

Central Government / Public Sector

CTN :45234715

26 May, 2026 NA

Multi City - Telangana

Tender For auction sale of pway scrap - psc sleepers -scrap cond. unserviceable released psc sleepers 60 kg with or without inserts. total 11311 nos. stack no.01 to 115 and 01 to 27 [total one hundred forty-two stacks]. udm lot no. 014096-26-00002 and 00003. loc. available km/tp at jmkt and kmx yard km 330/18-32, 331/8-22, 331/46-332/2, 332/1-331/45, 331/35-37, 331/35-33, 362/41a-43a, 33a-35a, 17a-11a, 3a-5a, 361/39a-37a, 35a-37a. delivery by number basis. pl no. 98011406. hsn code 72042910. note- 1] breaking of psc sleepers is not permitted in railway premises.2] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp. available under sse p.way n kzj, dist. hanumakonda and krmr state tg.

corporations/Associations/Others

CTN :45222653

29 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s 200/210 ltr rusted empty steel drums,u/s ms coal pipes and bend scrap with ceramic lining scrap,u/s cast iron scrap,u/s conveyor roller ms scrap without rubber lining,u/s mixed ms scrap,u/s grinding ring steel scrap,u/s grinding ball scrap,u/s grinding roll scrap,u/s bull ring segment scrap,u/s esp/ gi sheet / ms tin scrap,u/s boiler air heater tube steel (including bend and damage tube) scrap,u/s air heater tube cut piece scrap,u/s boiler water wall panel scrap,u/s economizer tube coil scrap,u/s crusher hammer scrap,u/s ms pipe scrap,u/s bearing scrap,u/s aluminium scrap/ aluminium cap of bulb and tube scrap,u/s chock scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s lighting fitting scrap,u/s cu-ni-90/10 condenser tube scrap,u/s ss condenser tube scrap,u/s carbon brush scrap,u/s uncomplete different size panel scrap (3 nos ),u/s 1600 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s 2500 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s gear box sdn-630 (write off),u/s dc motor 132kw and 125 kw scrap,u/s generator transformer 200mva,u/s lube oil with drum,u/s transformer oil with drum,u/s battery scrap (25kg),u/s plastic scrap (5 kg),u/s e-waste scrap,u/s beml make hydraulic loading machine pc 220fs shovel,u/s beml make bulldozer d-80-12a

Central Government / Public Sector

CTN :45218667

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - elec. loco scrap : actual lot no. 03122605 0719. pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) ms loco scrap of cond. & unserviceable diesel/elec loco scrap of dampers slacks speri blocks cotter pins roller pins side tm end shields, gear wheels qty.(approx 4.995mt) saddles, liners, cbc handles, dampers sperry blocks (with rubber attachments) stoppers fulk arms brake hangers brn wagon twisted locks twi u clamps j brackets msu racers pe enclosures end covers panto base panto servomotors and covers, gear wheels camshafts inner and centre bearing shells cab fan covers liners stay plates tfp bend pipes side stoppers split pins brake shoes hitachi tm end covers rgr fixing plates cht cable base plates tmds end covers sl brackets smgr crank shaft end shields, impellers axel box covers, cp beds, pe&ce encloses, cotter pins, roller pins, housing for traction bar, side stopper, brake hanger with shoe, rsi covers seat fixing base centre pivot side barer bottom plates net for air inlets, terminal cover, deflectors, cht turrets, panto springs, servo motors, relay panels crank shafts ,guiding rods, das pot covers, brake cylinder loose parts, ,foot steps, hand brake assembly, j brackets, liners, shock absorbers, sand brackets panto springs, axel box covers ,racers collars, butterfly valves cp beds, manifold, cht turrets, side stopper, bolts and nuts pipe pcs, mvmt ducts, sand nosels, tm covers hand brake assembly, sand ejectors pins and other miscellaneous mech./memo/elec. of sorts & sizes full or broken with or without attachments. this material available at lot no.514a,0119,411b location: road no.3&4 cross road. and 1to4 cross and 2&3cross and road1 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery

Central Government/Public Sector

CTN :45125907

21 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - m.s. melting( i.e. rail pieces below one mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs, erc /broken erc,broken gate structure of angle, fish plates , broken jfp, broken f/plate of various poundage, bridge checker plate, conversion material, wooden &t/out bearing plate, slide chairs, welding riser material , two way keys, ¿j¿ type erc, m.s. liner, check rail cut pcs, t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars, tie bars fencing, nut bolts various types ,g/joints of rail 60/52kg, bridge girder broken materials ,st & xing sleepers cut pcs, sej cut rail pcs of t/r, stretcher bar, switch chairs ,plate screw, rail dollies , light weight rail cum road trolly, welded chain, m.s.angle, m.s.rod, m.s.sheet, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills , cutter 52kg/60kg, crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings etc¿¿¿.¿¿.

Central Government/Public Sector

CTN :45125910

21 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - m.s. melting( i.e. rail pieces below 01 mtrs of various poundage 60/52kg/ 100/ 90/82/75/35lbs, erc,broken gate structure of angle, fish plates , broken jfp, f/plate of various poundage, bridge plate, conversion material, t/out bearing plate, slide chairs, two way keys, ¿j¿ type erc, m.s. liner, c/r , t/rails, s/r, w/r,v/rail cut pieces, washers, tie bars/ fencing, nut bolts various types ,g/j of rail 60/52kg, bridge girder broken materials ,st & xing sleepers cut pcs, sej cut rail pcs of t/r, stretcher bar, plate screw, bar strainghting crow bar, beater- pick, pans. mortor, wire, basket, shovel, rail- tong, hs lamp, wire clow, pawrah, various type hammers, augers, adzes, blunt ended crow bar , bar tommy, ballast rake, boxes tools iran, chain gates, cold sets, jim crew, push trolly, pick. axes , panches pin slopping, solid box spanner, empty drum 20litrs cap. e.r.c extractor, first aid box for rail fracture, rail dollies , adjustable spanner- f/ bolt & light weight , light weight rail cum road trolly, chamfering bit, thermit welding tools equipment & accessories 52kg/60kg and mechanical equipment , push trolly wheels, welded chain, m.s.angle, m.s.rod, m.s.sheet, ballast screen, straight edgs 1 m long/10cm, universal molding, vapariser keys, stand, welding equipment & tools box, crucible charge, bend pipe, chisel, various type boards, plier com, various type drills , cutter 52kg/60kg, crushible carring ring,fork, stand, nozzal, moluld shoes 60kg/52kg, tourch house pipe switch fittings & various types of p.way fittings etc¿¿¿.¿¿.

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Sleeper Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors