Latest slide chair repair Tenders | Government slide chair repair Tenders

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45485763

18 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of floor drain traps (v2) (q3) , soap dish - case (q4) , towel rail (q3) , towel ring (q3) , urinal bowls as per is 2556 (part 6) (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , plywood for general purposes marked to is 303 (v3) (q2) , non - ferrous metal butt hinges as per is 205 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , connector pipes for washbasins/ sinks/ geyser (q3) , steel countersunk head wire nails conforming to is 723 (q3)

CTN :45500074

20 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For supply of stainless steel shelf rack (q3) , soap dish - case (q4) , health faucet (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , towel ring (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3)

CTN :45507744

20 Jun, 2026 11.25 Lacs

Jalpaiguri - West Bengal

Tender For supply of ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , health faucet (q3) , connector pipes for washbasins/ sinks/ geyser (q3) , plastic seats and covers for water - closets as per is 2548 (q3)

CTN :45423737

13 Jun, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of connector pipes for washbasins/ sinks/ geyser (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , soap dish - case (q4) , pvc connection pipe , jet spray , oilet paper holder , brass spindle , ptmt bib cock fancy type , ptmt bib cock with long body , ptmt bib cock with nozzle , ptmt pillar cock fancy type , ptmt waste coupling , pvc sink waste coupling , pvc urinal waste pipe , pvc pipe , corrugated waste pipe , pvc waste pipe for sink , gi fittings , ptmt push cock , ptmt jet spray , teflon tape , washer , ptmt 20mm angle cock. , cp towel rack 200mm wide , ptmt towel ring * /bid number : gem/2026/b/7604626 + /dated: 03-06-2026 ' ' / bid document 1 / 109

corporations/Associations/Others

CTN :45424585

08 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap door with bonnet, fender & boot trunk with glass and plastic,scrap glass,scrap wiring harness,scrap alloy wheel,scrap fabric,scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,mix miscellaneous waste with sand,plastic scrap-bumper (pcb),plastic scrap-dashboard (pcb),plastic scrap- headlights tail lights (pcb),plastic scrap (pcb),scrap automotive seats,scrap compressor,scrap shocker,scrap rubber (pcb category),scrap defaced engine (4w),scrap alternator/ starter,scrap battery bulk (pcb category),scrap motor-radiator fan/blower/wiper motor (w/o),scrap e-waste with speakers (pcb category),scrap cutted seat belt,scrap empty catalytic converter,scrap tyres with and without rim (4w),scrap piping,scrap chassis,scrap steering column w/o motor,scrap leaf spring,scrap wiper blade w/o motor,scrap steering rack w/o motor,scrap defaced cng/lpg cylinder,scrap radiator and condenser,scrap clutch wire,scrap aluminum piping with rubber,scrap brake booster cylinder,used mix oil and fuel,defaced engine scrap (2w),defaced engine scrap (cv),scrap tyres with and without rim (2w),scrap sheared body scrap(h)

CTN :45298097

04 Jun, 2026 NA

Sirsa - Haryana

Tender For bid to ras corrigendum : supply of metal alloy casting water tap with aerator (v2) (q3) , health faucet (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , plasticized pvc tapes with non- thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , soap dish - case (q4) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2)

CTN :45298035

04 Jun, 2026 NA

Bathinda - Punjab

Tender For bid to ras supply of non modular piano type domestic electrical switches isi marked to is 3854 (q2) , elecric bells and accessories as per is 2268 (q3) , capacitors for electric fan motors as per is 1709 (v2) (q3) , electrical plugs (v2) isi marked to is 1293 (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , plastic seats and covers for water - closets as per is 2548 (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , metal alloy casting water tap with aerator (v2) (q3) , health faucet (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , soap dish - case (q4) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , connector pipes for washbasins/ sinks/ geyser (q3)

CTN :45297986

04 Jun, 2026 NA

Ludhiana - Punjab

Tender For bid to ras corrigendum : supply of non modular piano type domestic electrical switches isi marked to is 3854 (q2) , plasticized pvc tapes with non- thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , elecric bells and accessories as per is 2268 (q3) , capacitors for electric fan motors as per is 1709 (v2) (q3) , electrical plugs (v2) isi marked to is 1293 (q2) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , metal alloy casting water tap with aerator (v2) (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , connector pipes for washbasins/ sinks/ geyser (q3) , health faucet (q3) , soap dish - case (q4)

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

Slide Chair Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others