Latest slide stainer Tenders | Government slide stainer Tenders

CTN :42922643

10 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment:chromatographic workstation with capillary injector, packed injector, and auto-sampler should be quoted. chromatography workstation instruments should be built with self-diagnostic features and active-time management tools for better productivity, general features of chromatography workstation: column oven can accommodate two columns with maximum temperature range up to 400 c with set point resolution of 0.1 c. it should support 20 ramps & maximum temperature ramp rates of 100 c /min. cool down of oven from 400 c to 50 c in less than 5 min. fully automated with electronic pneumatic control afc / ppc / epc (digital control) for injector gas afc/epc/ppc should provide optimum performance with all types of capillary columns. system should have the capability to install a minimum of three injection and four detector ports. capable of detecting h and o across 0.01% 100% ranges (i.e., both trace in a matrix and bulk near-pure streams) column oven: operational temperature range: ambient +10 to 400 c overheat protection: programmable up to 420 c injector port: split/spitless injector 1 no packed injector 1 no, maximum temperature: 400 c, pressure setting range 0 100 psi with control setpoint of 0.01psi for specified pressure range., carrier gas flow control should have constant flow, constant pressure modes and constant linear velocity. auto injector: automatic sample injector up to 15 vials 2 ml vial with crimp set 100 nos, detector: flame ionisation detector (fid) 1 no, minimum detectable quantity: 3 pgc/s or more liner dynamic range: 1 107, maximum acquisition rate: 4 ms (250hz), thermal conductivity detector, sensitivity: >40000 mv maximum acquisition rate: 4 ms, maximum operating temp: 400 cgas cylinders & fittings, gas sampling: zero air, h2, n2 and helium gas cylinder with 2-stage regulators, each 1 no. four-stage gas purification panel and gas tubing. quote a suitable gas sample injector apparatus for the analysis of co2 gas, gas standards and a suitable packed column quote a 6-port gas sampling valve suitable for both manual (through syringe) and auto injection (online) quote sample line, sample loop, heated lines, filters, safety hydrogen purging, and flow control of gas. calibration gasses: suitable gas standards such as ar, he, h2, o2, co and ch4 should be providedpc and ups: pc i5 (or higher), 8gb ram, 1tb hdd, 22-inch led monitor (or higher), ssd: 512 gb, windows 10 os (or higher), wired keyboard and mouse. laser printer b/w, online ups sine wave capacity of 5 kva with battery power backup of 1 hour should be provided by the supplier general terms and conditions:warranty: 3 years manufacturer s warranty certificate. vendor should be an authorised provider of sophisticated high-precision chromatograph workstation systems for the past 15 years or more with: a proven track record in multiple countries and national institutes standard quality certifications such (iso 9001) 5+ past installations of similar systems in india. compliance statement should be enclosed with the quotation. the installation should be done at free of cost. hands-on training for 1 day for two trainees (faculty and scholars) must be provided on operation, maintenance and troubleshooting to two to two-three persons at the site of installation. if required, hands-on training must also be given to our faculty/scholars at a later stage, without any financial commitment to university. the technical details of the quoted instrument must be available on the official website of the principal supplier. the vendor should provide the list of end-users (recent) with contact details. the vendor must submit the latest reference letters from their previous users. trained service engineers in india (with suitable certificates) for the quoted model must be readily available to resolve the technical problems. a list of recent scientific publications in reputed journals from the user institutions where the quoted mode

CTN :42899816

06 Dec, 2025 NA

Raipur - Chhattisgarh

Tender For supply of automated slide stainer

CTN :42901420

15 Dec, 2025 35.00 Lacs

Badaun - Uttar Pradesh

Tender For supply of automated slide stainer

CTN :36982961

04 Dec, 2025 NA

Multi City - Uttarakhand

Tender For corrigendum : electro-mechanical works of 3x100 mw lakhwar mpp which includes âdetailed design & engineering, manufacture, quality assurance, quality control, shop assembly, shop testing, transportation, insurance till commissioning, delivery at site, site storage and preservation, erection, testing and commissioning, performance testing, field acceptance testing, training of employerâs personnel, handing over and guarantee of two years for the electro-mechanical equipment & systemsâ, on epc (engineering, procurement & construction) basis

CTN :42847300

08 Dec, 2025 NA

Panaji - Goa

Tender For tender for supply of laboratory equipments and instruments - machinery & equipment, elico cl223 colorimeter peak wavelength:410,470,490,520,540,580,610,640nmaccessories: matched test tubesphotometric range: %transmission: 0 to 250absorbance: (-)0.31 to 2.0absrepeatability:0.01 absreadability %t 1 abs 0.01light source: led detector :silicon photodiode, weighing balance weighing range: 1mg to 200gm readability: 1mg high quality industrial engineering plastic windshield with sliding doors short stabilization time failure alarm & overload protection function stainless steel pancomes with standard weight for calibration 100gm, one pan heating carousel with magnetic stirring holding capacity: 100 to 250 ml lcd display for temperature and stirring speed heating indication: red led temperature sensor temperature sensor resolution: 0.25 c rpm setting: electronic mode rpm sensor: i.r. sensor speed: upto 1500 rpm feather touch keypad hot plate top bowl type power supply 230v ac/50hzdimensions: 170 (w) 230 (l) 150 (h) mm, high precision weighing balance weighing capacity : up to 220 gm readability: 0.1mg, and repeatability 0.1 mg or less linearity: + /- 0.2mg reproducibility: /= 0.1mg standard deviation : +0.1mg pan : 90mm or more verifiability: capable of ec/oimc certification calibration: use 100gm +/-0.1mg display: touch screen led touch technology draft shields: glass shield weighing cell: monolithic weighing cell technology function: inter counting , percent weighing, weighing read out in most common international units leveling: manual adjustments: internal isocal calibration using fully automated internal temperature and time-controlled calibration and adjustment feature password protection for secure operation protects the balance against unintentional changes option to enable balance to adjust to ambient conditions with one click on the screen stabilization time : 1.5 seconds acrylic cover box with draft (one on each side and one on top) for additional protection from moisture and dust, magnetic stirrer with hot plate and external temperature sensorpower (w): 550max. stirring quantity (water)(liters):5 motor rating input (w):18 motor rating output (w):10 speed range (rpm):150-1500 speed / temperature display: digital lcd speed display resolution (rpm): 1 top plate material: stainless steel heating power (w): 500 temperature range: from room temperature to 340 c control accuracy of heating temperature: 1 c residual heating warning alarm: above 50 c control accuracy of heating temperature: 0.2 c external temperature sensor, electronic balancetop loading with transparent glass/ acrylic case cover weighing range: 0.1 mg to 200 g minimum weighing capacity: 0.1 mg maximum weighing capacity: 200 g readability: 0.1 mg display: electronic (lcd) weighing pan: stainless steel weighing pan size: 90 mm to 120 mm adjustable tare range up to maximum capacity of the balance, level indicator response time: 4 to 5 sec calibration: built in calibration/auto calibration gmp compliance unit: mg, g, ct key sound: yes; class:1; power supply: ac 220v/50-60 hz, ultrasonic processor/ probe sonicator with timer and pulse: microprocessor controlledwatts: 130 min sample size (ml): 0.15 max sample size (ml): 150 processing time from 1 second to 10 hours with timer control and a pulser display: lcd stainless steel probes: (2 mm, 3 mm, 6 mm, and 13 mm) with replaceable tip support stand with converter clamp power (vac): 220 power (hz): 50/60, high precision pen ph meteroperating temperature: 0 - 99 c measurement resolution: 0.01 ph ph range: 0.00-14 ph unit display: lcd/led ph accuracy: 0.05 temperature display fully waterproof moisture, dust, sand and heat resistant material: epoxy shaft other features: auto off function, low battery indicator, units for temperature power supply: battery accessories: calibration solution, variable volume pipette (10 to 100 l) autoclavable :autoclavable number of channels: 1 volume (metric) :10 to 100 l increments 0.2 l

corporations/Associations/Others

CTN :37136291

04 Dec, 2025 595.80 Crore

Dehradun - Uttarakhand

Tender For corrigendum : electro-mechanical works of 3x100 mw lakhwar mpp which includes detailed design & engineering, manufacture, quality assurance, quality control, shop assembly, shop testing, transportation, insurance till commissioning, delivery at site, site storage and preservation, erection, testing and commissioning, performance testing, field acceptance testing, training of employer s personnel, handing over and guarantee of two years for the electro-mechanical equipment & systems , on epc (engineering, procurement & construction) basis.

Slide Stainer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others