Latest slide track Tenders | Government slide track Tenders

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45611482

29 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of set of earthing shunt (overall length 1.5 meter) each made from 70 sq.mm, 19 strand aluminium cable confirming to is 2121 with 70 sq.mm. lug crimped on both ends. one setconsists of 02 items in 03 nos. 1) both end lug of 12.5 mm diameter bore, qty. = 01 no./set 2) one end lug with 10 mm diameter bore & another end lug with 12.5 mm diameter bore, qty. = 02 nos./set. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45610788

29 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of shunt led signal lighting unit, 110v ac retrofittable in existing cls housing and compatible with ac, led, ecr as per rdso specification no. rdso/spn/153/2023 rev 5.0 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45474724

25 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : e4363017 assy of shunt - assy of shunt (22pc) to drg. no 25801130026-v00, r07,copper pvc factor 1:0.2477 with bme copper billet price, total value (a) of rs. 1366.10/- per kg (dt:16-05-2026), silver pvc factor 1:0.003 withbase rate of silver rs. 2,66,350/- per kg on 26.05.26 -am as per website www.https://ibjarates.com/. (note: vendor code, material code & supply date only to be punched/sticker to be put on packet of 50 nos in addition to technical information if any.), assembly of shunt (25 pc) to drg no. 35801130047-v00, r05. copper pvc factor 1:0.4363 with bme copper billet price, total value (a) of rs. 1366.10/- per kg (dt:16-05-2026) , silver pvc factor 1:0.0022 with base rate of silver rs. 2,66,350/- per kg on 26.05.26 -am as per website www.https://ibjarates.com/. (note: vendor code, material code & supply date only to be punched/sticker to be put on packet of 25 nos in addition to technical information if any.)

Central Government/Public Sector

CTN :45358667

20 Jun, 2026 NA

Sultanpur - Uttar Pradesh

Tender For bid to ras supply of rotary geared type limit switch with 2 nc contact and having gear ratio 48: 1. contacts rated for 40 , counter weight operated gravity type shunt limit switch with 2 nc contact. rated for 10 amps at 500 , two way lever type shunt limit switch with 2 nc contact. contacts rated 10 amps at 500 vac in alumin

Central Government/Public Sector

CTN :45259143

22 Jun, 2026 NA

Medak-T - Telangana

Tender For corrigendum : a. emergency lube oil pump flow 25 m3 per hr discharge pressure 4.5 kg per cm2g api 610 b. dc tefc sq cage motor shunt wound 11 kw 220v 2900 rpm 3 step resistance c. flexible membrane diaphragm coupling d. motor shims

State Government

CTN :45131085

22 Jun, 2026 10.89 Crore

Ahmedabad - Gujarat

Tender For corrigendum : rate contracts for radiology interventional procedures supply for the year 2026-2027 & 2027-2028 - peripheral self expanding stent, 6 fr, otw, nitinol based, open/ closed cell/ hybrid design, with distal and proximal markers made of tantalum/ gold (for better visibility), should be 6 fr compatible. should be electropolished for better visualization under fluoroscopy. should have good radial strength. shaft length should be maximum 80 cm. - for biliary use., 250, 0.035", 4, diameter: 10 to 20 mm, length: 40 to 200 mm, peripheral self expanding stent, -, otw, nitinol based, encapsulated between 2 layers of eptfe, carbon coating in inner lumen. should have flared ends., 5, 0.035", 8, diameter: 5 to 10 mm, length: 10 to 60 mm, peripheral balloon expandable stent, -, otw, cocr/ stainless steel based, encapsulated between 2 layers of eptfe., 5, 0.035", 12, diameter: 4 to 8 mm, length: 10 to 40 mm, peripheral balloon expandable stent, -, stent for dedicated use in trans jugular intrahepatic porto systemic shunt. should have both covered and uncovered parts in 1 stent., 1, 0.035", 16, diameter: 4 to 8 mm, length: 10 to 40 mm, coronary stent graft, -, otw, nitinol based, fully covered, percutaneously retrievable (via ptbd access), with long radioopaque string, 1, 0.014" / 0.018", 20, all sizes, ureteric stent, -, should be made from pu material. should have 2 pigtail loops., 50, 0.035", 24, 260 cm, amplatz guide wire, -, amplatz super stiff guide wire j tip/ straight tip / angled tip, 100, 0.035", 28, 150 cm, angiographic guide wire, -, angiographic guide wire, hydrophilic coated, angled tip, 25, 0.035", 32, 260 cm, angiographic guide wire, -, hybrid angiographic guide wire, shoould be kink resistant, should come with distal 25 cm atraumatic hydrophilic coated tip, should have nitinol core, angled tip, 5, 0.014", 36, 150 cm, angiographic guide wire, -, angiographic guide wire with long tapered tip load of 6 gm, 5, 0.018", 40, diameter: 3 to 10 mm, legth: 40 to 300 mm, peripheral semi compliant balloon, -, otw, with low entry profile, markers at proximal and distal tip of balloon, 5, 0.035", 44, diameter: 12 to 26 mm, legth: 20 to 60 mm, peripheral non compliant balloon, -, otw, non compliant balloon, should have rbp of at least 18 atm, 5, 0.035", 48, diameter: 2 to 6 mm, legth: 10 to 40 mm, coronary noncompliant balloon, -, soft, compliant, with proximal and distal radio opaque markers, 5

Central Government/Public Sector

CTN :45577304

27 Jun, 2026 22.00 Lacs

Chandigarh - Chandigarh

Tender For supply of 3point3 kv grade resin cast potential trans part no nvcbp0041 , rectangular type cbct part no nvcbp0047 , terminal top with jaw contact 1250 a part no 2251870 , rectifire capacitor unit 1 ph 16 amps 11 part no nvcbi0022 , 96 sq mm voltmeter 0- 5kv ptr 3point3kv by 110v part no nvcbv0017 , base mounted earth leakage relay 2point5a 1n part no fcbm0038 , tpn d 2 o c plus 1e f idmt high set o c set part no nvcbp0028 , shunt trip coil assembly 110v dc part no nvcbv001 , auxiliary switch for vcb nvcbv002 part no nvcbv002 , under voltage relay part no p0082 , pilot relay 110v dc part no fsb0051 , current transformer 3point3 kv grade resin part no nvcbp0042 , vaccum interrupter part no nvcbv0013 , hrc fuse link 10 amps part no nvcbv0057 , hrc fuse link 2 amps part no nvcbv0058 , auxillary contactor part no nvcbp0039 * /bid number : gem/2026/b/7671355 + /dated: 16-06-2026 ' ' / bid document 1 / 23

Central Government And Public Sector

CTN :45392490

22 Jun, 2026 NA

Gondia - Maharashtra

Tender For corrigendum : supply of load ammeter range - 0 -1000 a dc, fsd - 75 mv, size :144 x 144 sq mm with external shunt, 1000 a/75 mv for n.g .loco zdm4 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45448957

20 Jun, 2026 28.45 Lacs

Pune - Maharashtra

Tender For corrigendum : supply of dura guard perforator 09 mm disposable , dura guard perforator 11 mm disposable , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 0 point 4mm , silver glide proseries non stick bipolar electrosurgical forcep with reusable bipolar cable compatible with silver glide forcep size 14 point 5cm batonet 1 point 5mm , 3d printed customised titanium cranial implant niv mfd 3d incredible , titan mini plate 4 hole with gap pack of 5 , self drilling mini screw for cranioplasty 1 point 5 x 5 mm , self drilling mini screw for cranioplasty 1 point 5 x 7 mm , cervical peek cage polyetheretherketone 6 x11 x14 mm , cervical peek cage polyetherether ketone 7 x 11 x 14 mm , cervical peek cage poly etheretherketone 8 x 11 x 14 mm , coalition integrated screws cervical spacer 12 x 14 x 6 mm , cervical titanium expandable corpectomy cage with end plate and locking machnism 20 mm , pedical screw contoured titanium rods 5 point 5 x 500 mm , expandable transverse cross connector with screws for 5 point 5 mm rod , straight rod 5 point 5 mm length 120 mm for percutaneus screw , bullet tip plif cage 10 x 22 mm , bullet tip plif cage 10 x 26 mm , bullet tip plif cage 8 x 22 mm , surgicel powder absorbable he ostat 3 point 0 gm per sterile prefilled syringe 5 unit per box laparoscope tip , nasal pack merocel 8cm and 4 cm , external ventricular drain , programmable vp shunt , cervical disc prosthesis , craniofix titanium clamp 11 mm box of 12 , craniofix titanium clamp 20 mm box of 6 , antibiotic impregnated vp shunt , medicated iodine impregnated incise drape set size 34 x 35

Slide Track Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors