Latest sliding bolt Tenders | Government sliding bolt Tenders

Corporations/Associations/Others

CTN :45721980

06 Jul, 2026 10.00 Lacs

Pune - Maharashtra

Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and

Central Government / Public Sector

CTN :45725308

06 Jul, 2026 NA

Haldia - West Bengal

Tender For supply of 9040m26e55 spare part for jockey pump (68-p-101 and 68- p- 102) -casing top half , casing bottom halp , shaft with key , impeller 1st stage, impeller 2nd stage , neck ring 032 , interstager coller , intersatge ring , sleeve , stuffing box bush , break down bush , sleeve nut , sleeve nut , gland packing , lock nut , bearing housing , bearing housing

State Government

CTN :45730115

06 Jul, 2026 NA

Khaperkheda - Maharashtra

Tender For procurement of various spares of compressors. - comp sealing ring, comp ring sealing, comp set of scrapper rings, comp blocking nut,comp cushion plate, comp vlv plate, spring plate, comp rub ring cover suct vlv, comp pist rod, cylinder assy , comp pist (aluminium), ptfe / teflon gland 8mm sq.

corporations/Associations/Others

CTN :45715512

14 Jul, 2026 17.94 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of coupling key part no 01 for beacon weir secondary raw water pump , shaft nut part no 03 for beacon weir secondary raw water pump , o ring water thrower , part no 8 for beacon weir secondary raw water pump , lantern ring , part no 16 for beacon weir secondary raw water pump , distance piece , part no 18 for beacon weir secondary raw water pump , stuffing box bush part no 19 for beacon weir secondary raw water pump , impeller key part no 24 for beacon weir secondary raw water pump , pipes , part no 25 for beacon weir secondary raw water pump , coupling bush for beacon weir secondary raw water pump , coupling pin for beacon weir secondary raw water pump , shaft sleeve fam for beacon weir secondary raw water pump , gland plate for beacon weir secondary raw water pump , crw pumps jtc-33cl/1 stage pum for beacon weir secondary raw water pump , water thrower , part no 7 for beacon weir secondary raw water pump , grease nipple for beacon weir secondary raw water pump , bearing housing de part no 04 for beacon weir secondary raw water pump , bearing housing nde part no 12 for beacon weir secondary raw water pump , stud bolt with nut m12x80 part no 26 for beacon weir secondary raw water pump

Central Government And Public Sector

CTN :45722240

20 Jul, 2026 NA

Kamega - Arunachal Pradesh

Tender For supply of day to day consumable items for maintenance of turbines of kameng hps - best quality stainless steel shim (ss304) of thickness 0.02 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.06mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.07mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.08 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.09 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.10 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.12 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.14 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.25 mm, width: 500mm, stainless steel shim (ss304) of thickness 0.50 mm, width: 500mm, best quality neoprene rubber cord 4 mm, best quality neoprene rubber cord 5.5 mm, best quality neoprene rubber cord 6 mm, best quality neoprene rubber cord 7 mm, best quality neoprene rubber cord 8 mm, best quality neoprene rubber cord 10 mm, best quality neoprene rubber cord 11 mm, hylomer blue gasket jointing sealant, champion make asbestos free oil-250 gasket, 3 mm thk (1500 mm x 5000 mm), best quality nitrile rubber sheet, size: 600x1000mm, 1.5 mm thickness, best quality nitrile rubber sheet, size: 1200x1000mm, 3 mm thickness, loctite 406 (20gm), anabond 666t-max (100gm), loctite si 595 (300 ml), loctite 243 threadlocker (50 ml), skf bearing grease 3in/5, m12x100 hilti anchor bolt, m16x150 hilti anchor bolt, m20x200 hilti anchor bolt, m12x 100 grade: 8.8 bolt with nut & washer, m16x 100 grade:8.8 bolt with nut & washer, m20x 100 grade:8.8 bolt with nut & washer, m20 full threaded stud, grade: 8.8 of length 1m, m12 full threaded stud, grade: 8.8 of length 1m, m16 full threaded stud, grade: 8.8 of length 1m, gland packing, make: stoplik, style-99, size: 10mm, paint brush flat 50mm, paint brush flat 75mm

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45739215

10 Jul, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of wooden balli , wooden plancks , nail 2 inches , fevicol , paint all colour , cgi sheet , tarpaulin plastic 18x24 ft length , tapaulin plastic 30x30 ft length , rope nylon , water oblique fol storage container , portable fd toilet , hing steel , tower bold , sliding bolt , copper wire 1point5 sqmm , service cable 16mm aluminium wire , tube light with stand , 16amp switch board with switch and socket , cfl bulb , one side wooden planks

CTN :45716681

08 Jul, 2026 1.20 Lacs

Rajauri - Jammu And Kashmir

Tender For supply of iron square pipe 3 inch x 1 point 5 inch 20 feet long , iron square pipe 2 inch x 2 inch 20 feet long , ppgi sheet 10 foot x 04 foot , taping screw 1 inch , taping screw 2 inch , iron cutting blade , iron square pipe 1 inch x 1 inch 20 feet long , door handle , sliding bolt with accessories , door handle 4 inch

CTN :45726077

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of leakage repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of leakage repair material for financial year 2026-27, d- joint for ci pipe (size 80 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for ci pipe (size 100 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for ci pipe (size 150 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 90 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 110 mm) complete with rings and nut bolts of necessary size (as per isi), d- joint for hdpe pipe (size 160 mm) complete with rings and nut bolts of necessary size (as per isi), plastic ring (size 80 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 90 mm ) for d- joint of hdpe pipe (as per isi), plastic ring (size 100 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 110 mm ) for d- joint of hdpe pipe (as per isi), plastic ring (size 150 mm ) for d- joint of ci pipe (as per isi), plastic ring (size 160 mm ) for d- joint of hdpe pipe (as per isi), telpiece (size 90 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 110 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 160 mm ) for d joint of hdpe pipe (as per isi), telpiece (size 80 mm ) for d joint of ci pipe (as per isi), telpiece (size 100 mm ) for d joint of ci pipe (as per isi), telpiece (size 150 mm ) for d joint of ci pipe (as per isi), mj collar (size 200 mm or 8 inch) complete set (as per isi), mj collar (size 250 mm or 10 inch) complete set (as per isi), mj collar (size 300 mm or 12 inch) complete set (as per isi), mj collar (size 350 mm or 14 inch) complete set (as per isi), sluice valve (size 80 mm) 3 inch complete with telpiece and nut boltes (as per isi), sluice valve (size 100 mm) 4 inch complete with telpiece and nut boltes (as per isi), sluice valve (size 150 mm) 6 inch complete with telpiece and nut boltes (as per isi), nut bolt set of size dia- 4 mm and length 4 inch (as per isi), nut bolt set of size dia- 4 mm and length 5 inch (as per isi), nut bolt set of size dia- 4 mm and length 6 inch (as per isi), nut bolt set of size dia- 4 mm and length 9 inch (as per isi), nut bolt set of size dia- 4 mm and length 2.5 inch (as per isi), nut bolt set of size dia- 5 mm and length 2.5 inch (as per isi), nut bolt set of size dia- 5 mm and length 6 inch (as per isi), nut bolt set of size dia- 5 mm and length 9 inch (as per isi), graphite gland (3 sooti) (as per isi), graphite gland (4 sooti) (as per isi), graphite gland (6 sooti) (as per isi), packing for sluice valve, lead bull (as per isi), tee ci (size 6x4) (as per isi), tee ci (size 3x3) (as per isi), tee ci (size 3x4) (as per isi), tee ci (size 6x6) (as per isi), tee ci (size 4x4) (as per isi), tee hdpe (size 3x3) (as per isi), tee hdpe (size 4x4) (as per isi), tee hdpe (size 6x6) (as per isi), tee hdpe (size 6x4) (as per isi), tee hdpe (size 6x3) (as per isi), tee hdpe (size 4x3) (as per isi), reducer hdpe (size 10x8) (as per isi), reducer hdpe (size 6x4) (as per isi), reducer hdpe (size 8x6) (as per isi), reducer hdpe (size 4x3) (as per isi), reducer hdpe (size 6x3) (as per isi), elblow hdpe (size 90 mm) (as per isi), elblow hdpe (size 110 mm) (as per isi), elblow hdpe (size 160 mm) (as per isi), m-seal, cycle tubes, bend of size 90mm (3") for hdpe pipes (as per isi), bend of size 110 mm (4") for hdpe pipes (as per isi), bend of size 160 mm (6") for hdpe pipes(as per isi), end cap (size 90 mm) (as per isi), end cap (size 110 mm) (as per isi), end cap (size 160 mm) (as per isi), gi pipe (size 2"), gi elbow (size 2"), gi flange set (size 2"), gi socket (size 2"), gi union (size 2"), gi nipple (size 2"x12"), gi nipple (size 2"x9"), gi nipple (size 2"x6"), gi nipple (size 2"x4"), gi nipple (size 2"x3"), gi nipple (size 2"x2"), gi short nipple (size 2"), gi tee (size 2"x2"), gi tee

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

Sliding Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government / Public Sector

State Government

corporations/Associations/Others

Central Government And Public Sector