Latest sliding door Tenders | Government sliding door Tenders

Central Government/Public Sector

CTN :45731992

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For body side sliding door to drg.no. icf/mrvc/c/bt-5-8-001,alt 'e' col.i. special condition : 1.leaves with top guide rails shall be supplied to furnishing depot (for fitment after painting of shell). 2.installation required annexure - 'a', dtd 13-09-2023 to be followed. 3. supply rate and installation rate to be quoted seperately. 4. packing drawingicf/j&t/sk-1866, alt 'nil', similar packing drg. to be used for sliding door packing. rust prevention precautions to be followed for during storage. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45728362

03 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of sliding door cylinder for lwaccne economy lhb coaches. [ warranty period: 30months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736115

01 Jul, 2026 NA

Agra - Uttar Pradesh

Tender For supply and installation of saloon sliding door mounting for lhb ac chair car coaches to drg. no. 1 10113.0.22.135.001, alt- r1 and as per rcf specn. mdts-082 rev- 04. [ warranty period: 84 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45730959

13 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of stopper angle for sliding door to icf drg. no. icf/sk3-5-8-008 alt-b/nil. material and specification as per drawing. as per drg.no. icf/sk3-5-8-008 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45725218

20 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of book self standard size, make-godrej or similar., steel locker with multi compartment size-h 1800mm x w 1200mm x d 450mm. make-godrej or similar., sliding door file storage unit m/s godrej make or equivalent, steel almirah big size (78 x 36 x 19)inch approx make-godrej or similar., tools storage cabinet size - depth in mm (460 mm) width in mm (915 mm) height in mm (1800 mm) & coverd with all three sides, steel plain almirah with 4 adjustable slaves size:1980mm height, 915 mm widthand 485 mm depth., make: godrej storewel plain large or similar of reputed brand., steel open rack-size (height=6-8 feet approx, width=standard, depth=standard). or similiar, ?steel plain almirah with 4adjustable slaves size:1980mm height, 915 mm widthand 485 mm depth. make:godrej storewel plain large orsimilar of reputed brand., supply of steel slotted angle rack of size 72" x 36 x14" for the use of, store item, office visitor chair non-revolving and non-tilting chair with armrest. detailed specification as per gemc-511687792804101 dated 14/09/24, dice office systems revolving chair with center tilt mechanism, type of chair :hight back, seat material: pu foam, actual seat height from floor surface (mm): 485, seat hight audjustment (mm): 100, actual width of seat (mm): 525, width of backrest (mm): 500, armrest type and arm movement: fixed (detailed description/specification as per product # 1 of gem contract no. gemc-511687749216043 dt.22/08/2024), moulded chair with table (with heavy duty four legs with plasitc greeping table size-30, revolving chair overall width (?10 mm) 750 mm backrest height ?15 mm 600 mm backrest width ?10 mm 440 mm seat height ?10 mm 440 mm seat width ?10 mm 460 mm seat depth ?10 mm 480 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687798747171 dt.25/06/2024), office revolving chair godrej make model no.9u02r bravo or similar of reputed brand, supply office chair make godre ch-78 or reputed brand or similar, office revolving chair godrej make model no.9u02r bravo or similar of reputed brand, supply office chair makes godrej ch-78 or similar of reputed brand., revolving chair, standard computer tables size(1200mm l x 600mm d x 750mm h) approx with sliding keyboard tray with drawer. make-godrej or similar., modular office table of size 1500 mm lx 600 mm d x 750 mm ht with three drawer (2 + 1) make godrej or similar., center table dimension, top matarial: flate glass, frame matarial: other wood, leg material: other wood, dimension of top 965mmx 457mm, height of centre table: 510 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687771629606 dated 19/05/22), computer table size of computer cum printer table ?10 mm (lxbxh) 1200 mm x 750 mm x 750 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687798653140 dt.05/06/2024), office table size 1800 x900x760 (mm) storage both side. detailed specification as per gemc-511687753374503 dated 25/02/23, wooden centre table with glass table top-fix, stainless steel dining table with 6 chair standard size., supply of office table with laminated top with three drawers on left hand side and one locker on the right hand side. olive brown with duplicate keys. make: godrej model t-9 or reputed brand or similar., supply of office table with laminated top with three drawers on left hand side and one locker on the right hand side. olive brown with duplicate keys. make: godrej model t-9 or similar of reputed brand., decorative coir mats size 855 cm x 50 cm confirming to is:11420 part-3:1985: latest, a sample to be approved by c.a.

Central Government/Public Sector

CTN :45736661

20 Jul, 2026 NA

Multi City - Multi State

Tender For supply of sliding door pantry mounting. as per rcf drg.no. 1 10113.0.22.135.003 alt ar.[ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45735982

01 Jul, 2026 NA

Multi City - Multi State

Tender For supply of handle for vestibule sliding doors of lhb coaches to drg. no. lw56362 alt nil. mat & spec: as per drawing [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45737864

21 Jul, 2026 7.94 Lacs

Patti - Punjab

Tender For supply of cement bag 50 kg , course sand , wall putty , exterior paints 20 ltr , interior emulsion paints 20 ltr , synthetic enamel paint 20 ltr , thinner , 100 mm flat brushes , 50 mm flat brushes , sand paper sheet , wooden beading patti , wire mesh , 1 inch nail , 6 mm plywood , 9 mm plywood , 12 mm plywood , 25 mm plywood , butt hinges , 35mm wood screws , 25mm wood screws , white cement , hdmr board , 4 mm plain window glass , glass putty , tower bolt , sliding door bolt , door handle , fevicol , sunmika plain brown , water storage tank white with lid having spikes

CTN :45627252

03 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , screw wood steel 12 mm , varnish clear , nails wire steel 20mm , screw wood steel 65 mm , screw wood steel 50 mm , screw wood steel 15 mm , screw wood steel 30 mm , screw wood steel 40 mm , nails wire steel 40 mm , french polish , pegs alu powder coated , touch wood polish , nails wire steel 12 mm , screw wood steel 35 mm , nails wire steel 25 mm , brush 50 mm , pianotype hings 6 feet long , ss handle for drawar , screw wood steel 20 mm , knob 40 mm , nails wire steel 50 mm , sunmica sheet 2400x1200x1.5 mm thick , fevicol , screw wood steel 25mm , paint synthetic enamel og , lock for drawar , plywood teak face 2400x1200x3.5mm thick , plywood bwr 2400x1200x12 mm thick , cushion size 550x530x100 mm 32 density with tapestry cloth , prelam mdf board 8feetx4feetx18 mm thick , sunmica sheet 2400x1200x1 mm thick , lock for almirah steel , nipple 20mm x300mm , gi tee 20 mm , ptmt ball cock 25 mm complete , union gi 50 mm , hex nipple 20 mm , union gi 40 mm , elbow gi 20 mm , socket reducer 25x50mm , nipple 25mm x300mm , gi 3 way elbow 20 mm , gi tee 25 mm , gi tank nipple 20 mm , elbow gi 25 mm , ptmt ball cock 20 mm complete , bow handle alu 125 mm , cp grating with holw 125 mm , gi bend 15 mm , gi socket 15 mm , gi elbow 15 mm , door stopper alu , nipple 15mmx300mm , cp waste coupling 32 mm , oil putty , cp grating 125 mm , gi nipple 15mmx100 mm , ss but hings 100mm , union gi 15 mm , m seal 100 gms , union gi20 mm , gi socket 20 mm , gi nipple 15mmx150 mm , paint synthetic enamel red , ss but hings 75 mm , gi nipple 15mmx50mm , ptmt grating doom 125 mm , gi tee 15 mm , brush 100 mm , pvc jet fitting for ewc , brush 75 mm , ptmt pvc connection 450 mm long , ptmt grating 150 mm , ptmt grating with hole 125 mm , gi plug 20 mm , gi plug 15 mm , gi 3 way elbow 15 mm , socket reducer 15x20mm , paint synthetic sky blue , bell push pianotype , two way switch 6 amp , lamp holder pendent bakalite , bed switch 6 amp , plywood commercial 8 feet x4feetx6 mm , plywood commercial 8 feet x4feetx12 mm , plywood bwr8feetx4 feetx4 mm , plywood bwr 8feetx4feetx8mm , mirror cabinet in ptmt , ss wire cloth 0.56 mm dia with aperture 1.14 , looking mirror pvc of size 450x600x3mmthick , hydraulic door closure , cp soap dish , cp sink cock 15mm , wiremesh woven 0.63 mm dia aperture 1.18 mm , ptmt ball cock 15 mm complete , pvc towel rail 600 mm , glass corner shelf with grill , sliding door bolt alu 300 mm , ptmt flushing cistern 10 ltr cap , cp towel rail 600 mm , alu bow handle 150 mm , pvc towel rail 450 mm , helical door spring , ptmt jet spray with 1 mtr tube , paint synthetic enamel black , paint synthetic enamel white , bib cock cp 20mm , waste pipe pvc for whb 32mm , paint synthetic enamel yellow , pvc connection 15x600 with ptmt nut , alu lugs for 240 sqmm cable , alu lugs for 300 sqmm cable , alu lugs for 185 sqmm cable , alu lugs for 400 sqmm cable , alu lugs for 120 sqmm cable , alu lugs for 70 sqmm cable , alu lugs for 150 sqmm cable , alu lugs for 50 sqmm cable , alu lugs for 95 sqmm cable , alu lugs for 35 sqmm cable , desert cooler steel body cap 85 ltr //bid details 2 / 78

Sliding Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors