Latest sliding valves Tenders | Government sliding valves Tenders

corporations/Associations/Others

CTN :45345600

24 Jun, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

CTN :45568064

30 Jun, 2026 20.00 Lacs

Burhanpur - Madhya Pradesh

Tender For tender for purchasing material in the water works department in the financial year 2026-27 - 5x5 submersible motor pump, 10x8 hp submersible motor pump, 12.5x10 hp submersible motor pump, 10 hp monoblock motor pump, 2-inch gi pipe socket (b-class), 10-foot length, 2-inch gi heavy elbow (b-class), 3-inch gi heavy elbow (b-class), 2-inch gi tee (b-class), 2-inch gi coupling (coarse and fine thread), 2-inch gi flange set (b-class), 2-inch gi blanking plate (b-class), 2-inch gi sluice valve (b-class), 3-inch gi sluice valve (b-class), 2-inch gi d-joint (b-class), 3-inch gi d-joint (b-class), 2-inch gi wheel valve (b-class, brass), 3-inch gi wheel valve (b-class, brass), 2-inch gi gate valve (b-class), 3-inch gi gate valve (b-class), 2-inch gi non-return valve (b-class), 2-inch pvc pipe (6 kg, 20 ft), 3-inch pvc pipe (6 kg, 20 ft), 6-inch pvc pipe (6 kg, 20 ft), 2-inch pvc elbow (6 kg), 3-inch pvc elbow (6 kg), 2-inch pvc coupling (6 kg), 3-inch pvc coupling (6 kg), 2-inch pvc mta (6 kg), 2-inch pvc fta (6 kg), 3-inch pvc mta (6 kg), 2-inch pvc fta (6 kg), 2-inch pvc tee (6 kg), 3-inch pvc tee (6 kg), 2-inch pvc end plug (6 kg), 3-inch pvc end plug (6 kg), 2-inch pvc valve (6 kg), 3-inch pvc valve (6 kg), 2-inch pvc repair coupler (6 kg), 3-inch pvc repair coupler (6 kg), 2x5 pvc service saddle (6 kg), 3x5 pvc service saddle (6 kg), 6x5 pvc service saddle (6 kg), 6x2 pvc service saddle (6 kg), 3x2 pvc service saddle (6 kg), 2-inch rubber gasket, 3-inch rubber gasket, 0.5-inch pvc pipe: 6 kg per 10 feet, 1-inch pvc pipe (10 ft) - 6 kg rating, 0.5-inch pvc end cap - 6 kg rating, 1-inch pvc end cap - 6 kg rating, 0.5-inch pvc elbow - 6 kg rating, 1-inch pvc elbow - 6 kg rating, 1-inch pvc coupling - 6 kg rating, 0.5-inch pvc coupling - 6 kg rating, 1-inch pvc valve - 6 kg rating, 0.5-inch pvc valve - 6 kg rating, 0.5-inch pvc brass elbow - 6 kg rating, solution (250 ml pack), 0.5x3 inch gi nipple, 0.5x6 inch gi nipple, 0.5x9 inch gi nipple, 0.5x12 inch gi nipple, 0.5x18 inch gi nipple, 0.5x24 inch gi nipple, 12 mm aluminium service wire (300 ft pack), 4 mm cable, 3-phase (for tubewell), 63a cutout, tape bundle (1/2 inch), 60 amp fuse wire, ltlk coil, ltlk claw/contact, ltlk block, ltlk kit/pocket, 9x14 relay, 20x32 relay, nut-bolt, luxury, 2.5-inch gi pipe (10 ft), 2.5-inch gi pipe (20 ft), 2.5-inch gi pipe, 6-inch pvc coupling, 6-inch pvc elbow, 6-inch p.v.c.t., 8" x 6" gi-pvc reducer, 0.5" gi tap, 0.5" upvc mta, 0.5" upvc fta, 8" tailpiece with ring, 6" tailpiece with ring, 4" tailpiece with ring, 3" tailpiece with ring, 4" gi pipe (class b, 20 ft), 4" gi elbow (class b), 4" gi coupling (class b), 4" gi tee (class b), 3" gi pipe (class b, 20 ft), 3" gi coupling (class b), 3" gi tee (class b), 3" gi bend (class b), 2.5" gi bend (class b), 2" gi elbow (class b), 2" gi tee (class b), 2" gi bend 'b' class, 0.1-inch upvc threaded nipple, 1-inch upvc threaded nipple, 1.5-inch upvc threaded nipple, 12-inch pipe wrench, 6x4 gi reducer, 8x6 gi reducer, 8-inch upvc repair coupler, 6-inch upvc repair coupler (6 kg), 6x8 pvc reducer (6 kg), 6x4 pvc reducer (6 kg), 4-inch pvc elbow, 4-inch pvc coupler, 4-inch pvc tee, 6-inch pvc elbow, 6-inch pvc coupler, 6-inch pvc tee, steel binding wire, nylon rope (per meter), 10-foot tape measure, 100-foot tape measure, 24-inch pipe wrench, 12-inch pipe wrench, ring pipe wrench, l&t starter single-phase starter (ltlk), 3-phase semi-starter, fuse wire (60 swg), bleaching powder, alum, chlorine, 1/2 hp motor, 1 hp motor, 1/2-inch hose pipe, 2-inch hose pipe, 3-inch hose pipe, 4-inch hose pipe, 2.5-inch canvas hose pipe (15 meters, for fire-fighting use), 15 hp monoblock motor pump, 20 hp monoblock motor pump, 15 hp submersible motor pump, 8-inch gi casing pipe, 2.5-inch pipe, 1-inch upvc threaded coupler, 1-inch upvc bend, oil paint (500g pack), taparia screwdriver, tester, large heavy-duty locks, 1/2-inch gi coupling, 1/2-inch hacksaw blade, hammer, pickaxe, shovel, metal pan (tagari)

CTN :45415159

19 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

CTN :45585637

24 Jun, 2026 NA

Solan - Himachal Pradesh

Tender For repair and maintenance of lwss lwss charnobri lehri in tehsil nalagarh distt. solan (hp) (sh: - providing & fixing cast steel sluice valve & nrv valve.)

CTN :45597195

01 Jul, 2026 NA

Solan - Himachal Pradesh

Tender For restoration of damages of lwss haripur sandholi khabrian in section baddi under jsv sub-division baddi in tehsil baddi distt. solan (hp). (sh:-providing and laying 40 mm, 32 mm and 25 mm dia pipe line from overhead tank at basanti bag to village billanwali gujjaran ward no. 9 and repair of sluice valve rods of various dia and also remove the blockage and leakages of pipe line in distribution system under jsv section baddi).

CTN :45596637

25 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For rrd of various lwss lahru sadda in tehsil jaisinghpur distt. kangra (hp) (sub head:-repair/replacement and fixing of sluice valve, nrv bend and other miscellaneous work )job-2

CTN :45540612

03 Jul, 2026 20.00 Lacs

Rewa - Madhya Pradesh

Tender For inviting rates for supply of jalpraday and pipe line samagri for financial year 2026-27 in nagar parishad semariya dist rewa -clamp with nut & bolt (isi marked: sizes 2, 3, 4, 6); m.s. clamp with nut & bolt (isi marked: sizes 3, 4); hdpe pipe (isi marked: sizes 1, 2, 3, 4, 5, 6); bleaching powder (grasim, isi marked); cable (isi marked: 2.5 mm 3-core copper, 4 mm); connection cable (isi marked: 4-pole 4 mm armoured); connection clamp (isi marked: sizes 2, 3, 4, 5, 6); pump repair (1 hp to 12.5 hp, as per individual specifications). includes impeller and repair materials; items include: 2" isi-marked pvc gate valve, 2.5" isi-marked pvc gate valve, 3" isi-marked pvc gate valve, 3" isi-marked hdpe elbow, 4" isi-marked hdpe elbow, 6" isi-marked hdpe elbow, 180mm isi-marked pvc plain casing pipe, 12" isi-marked pipe wrench, 24" isi-marked pipe wrench, 2.25" isi-marked pipe lifter, 7.5 hp isi-marked panel board (single phase/ltl), 10.0 hp isi-marked panel board (single phase/ltl), 2 hp isi-marked panel board (single phase/ltl), 110mm isi-marked rubber ring, 160mm isi-marked rubber ring, and 180mm rubber ring. isi marked c.i. flange (2" & 3"); isi marked c.i. sluice valve (110mm, 150mm, 180mm); isi marked c.i. d-joint (100mm, 150mm, 180mm); isi marked c.i. non-return valve (100mm); isi marked c.i. tail piece (100mm, 150mm, 180mm); isi marked hdpe tee (100mm, 150mm, 180mm); nuts & bolts; isi marked submersible pump (7.5 hp, 20-stage); isi marked submersible pump (2 hp, 20-stage).

Central Government/Public Sector

CTN :45432406

18 Jun, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of ball valve 4by2-way g1by2 pn500 , dpac-s hp pilot valve , achp prv 1by4 inch bspf 0.5-10 bar r13614 , achp 3by8 midi pressure regulator , achp 6.0 mm nrv cvh1-h6m6m , dpac-s hp cover seal 109x103.4x5.6 mm , r-cp filter element hp054-1-f , r-cp filter element hp054-1-s , achp d.p. transmitter dmt 143 , installation and repair of air dryers

corporations/Associations/Others

CTN :45345524

22 Jun, 2026 10.97 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds.

CTN :45538750

18 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o lwss challahal dishti, under jsv section mandri sub-division sunni, tehsil sunni, district shimla hp (sh: deployed of manpower for operation of pumping machinery i/c watch & ward, minor repair of schemes such as providing and fixing of various dia fitting i.e. g.1 socket, union, tee brass full way wheel valve etc. one coat of white washing snow cem in all civil structure, cleaning of storage tanks, brush cutting & removal of slips around the civil structure, welding of rsing main of all schemes, repair of panel board, starter main switch in this estimate complete with all respect to entire- satisfaction of engineer-in-charge.)

Sliding Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others