Latest slip gauge Tenders | Government slip gauge Tenders

Central Government And Public Sector

CTN :45737198

15 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5 mm (in incremental of 0.1 mm) total of 21 nos, thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gaugesurfaces to be ground, sharp corner to be removed. note:item to be supplied along with calibration certificate. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45724131

07 Jul, 2026 NA

Kota - Rajasthan

Tender For auction sale of pway scrap - pl no. 98050035, ms-slide chair psc. special barring plate of 1 insert, sej brakate (3 hole) with coller & stopper. sej breakate (2 holc). sej breakate (3 hole) with coller. sej breakate (3 hole) without coller, special bearing plate off size, signal rode with p breakate half size, signal rode with lug. signal rode with p breakate full size, streture bar half size with breakate, streture bar half size with breakate & lug, streture bar half size with breakate (small), complete streture bar, guage tie plate with p&c, guage tie plate with moter plate, guage tie plate with i breakate, guage tie plate with 1 without breakate/motor, lc breakate with bolt, lc breakate of check rail without bolt, glued joint mtr. plate 60 kg, glued joint mtr. plate 52 kg. 52 kg joggle plate, 60 kg joggle plate (wide gap), 52 kg 610mm fish plate, 60 kg 610mm fish plate, motor/c plate, rail 60 kg below 1 mtr., rail 52 kg below 1 mtr., rail 87 lbs below 1 mtr., rail 90r below 1 mtr., rail narrow gauge, rail double headed, chek rail 90r lc with tie bar, chek rail without flenz, sej ord. t/r end piece, improved sej 6902 t/r end piece, sej ord. special repair end piece, etc. with attachment if any. 72.280 mt. for stock holder sse/pw/s/kota. ss11 no.-sse/pw/s/kota/p&c-ms/2025-26/03 dt.02.03.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by actual weight on government approved dharam kanta only. the material are lying in rajasthan state.

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45702774

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s guage pipe line of various sorts, shapes, sizes in as is where is condition.note: segregation and removal of attachments is not permitted. pl no:98210191. location: inside new rsg ward bin o

CTN :45682021

03 Aug, 2026 NA

Asansol - West Bengal

Tender For supply of spares for slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5mm (in incremental of 0.1 mm), total of 21 nos, along with calibration certificate.thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gauge surfaces to be ground, sharp corner to be removed. [ warranty period: 30 months after the date of delivery ] ]

CTN :45674426

06 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of slip gauges / gauge blocks (q3) , precision height gauge (q3)

CTN :45689893

25 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of 45 types of gauges for extractor - chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , gap limit gauge , gap limit gauge , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge , hole depth gauge for extractor , plug gauge for extractor , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge for extractor , position gauge , position gauge for extractor , position gauge for extractor , position gauge for extractor , profile gauge for extractor , radius gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , slip gauge for extractor , slot depth gauge for extractor , slot depth gauge for extractor , support for extractor , chamfer gauge for extractor , position gauge for extractor , position gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor

CTN :45667959

08 Jul, 2026 90.0 Thousand

Vellore - Tamil Nadu

Tender For supply of slip gauges / gauge blocks (q3)

Central Government/Public Sector

CTN :45637854

02 Jul, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - released condemned and u/s abandoned railway staff quarters under sse-works-iii-dhd, {[1] e/40 (a to d)- 04unit, location- ppd railway colony, [2] e/1 (a to h)- 08unit, location- jkt railway colony, [3] t/2 (a to d)- 04unit, location- usra railway colony}, total- 16unit consisting of,{(i) ms scrap-jafry, door frame, gi pipe 20mm,32mm, gi fan pipe, window rod, flate 50x50x5 mm, angle praline 75x75x6, in tie50x50x5 mm, electrical 50mm, back side grill, qty- 3996.75 kg approx, (ii) rail-metre guage, qty- 3510.40 kg approx, (iii) wooden scrap- door frame, window frame,jafri/xpm jail, qty- 1111.47 kg approx, (ii) ac sheet, qty- 238.44 sqm approx, (iv) masonary (brick, stone), qty- 426.04 cum approx, (v) rcc steel, qty- 11353.00 kg approx}, fdp- 65 days. note-(1) hidden items other than jvr are not included in this lot, if found it will be handed over to the custodian before delivery. (2) non ferrous if any, not included in this lot. (3) description of lot is as per jvr, (4)the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (5) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den, (6) gi pipe line which is laid in the ground is not included in lot.

Slip Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector