Latest slip ring assembly Tenders | Government slip ring assembly Tenders

Central Government/Public Sector

CTN :45711072

20 Jul, 2026 36.87 Lacs

Amritsar - Punjab

Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp

corporations/Associations/Others

CTN :45723719

13 Jul, 2026 21.51 Lacs

Kasaragod - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at rajapuram estate - hanging solar power fence, p.p reel insulator , must be of virgin plastic metirial. polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avg, length 4.6 cm avg), strain insulator, must of poly polypropylene plastic rated for 15 kv uv stabillized ,(weight 40 gm avg, length 7 cm avg), gi post 12 feet , 2" gi pipe, 14 guage thickness,total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6 mm at end of bend pipe, intermediate post (t angle post) , 6ft., painted(25mm*25mm*3mm)having holes of size 6 mm at required interval of fencing installation, supporting post, 10ft.,gi-1,14 guage thickness,painted, stay (t angle), 2ft., painted(25mm*25mm*3mm), 12 swg ht wire, 12 guage,2.5 mm dia high tensile wire with zinc coating for use as conducting wires,binding strain insulator, 14 swg binding wire , high quality zinc coating wire for binding reel insulator, tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade, aluminium ferruel, aluminium ferruel 3 mm, wire tightner , permanat wire tightner made of special aluminium alloy designed for kv, uv stabillized, earth rod, copper plated earth rod 14 mm -3ft. length, earthing compound, earthing compound 8 kg, gate handle, gate handle and spring assembly, handle made of polyethylene, leadout cable,leadout cable for fence system double insulated gi cable inner core wire 2 sq.mm.hot dipped galvanised steel core, capaie of with standing 15kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable, 2.5 mm2 single core copper cable for connecting the solar panel to the tubular battery through charge control unit with required terminal sockets,nut and bolt,washer, lightning diverter, 15kv -50kv rod gap arrester,must be capable of diverting stray lightning and adjustable for spark gaps adequate earthing to be provided, 100 watt solar panel, 100 watt/12 volt and above poly cristalline with 10 year warranty having iec/mnre certification, charge control unit, 20 a,12/24 pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer, energizer with 10 kv output safety standards to be followed are bis 302-2-76 iec60335-2-76. switch-high, medium and low power setting., fence alarm system, fence alarm system covering area of 1.5 km, solar panel sapporting stand with metal box painted (for battery and energiser), 18 guage thickness metal box(lockable). gi-sheet, painted should be capable of housing battery, charge controller and energizer and fixed with reguired clamps and nut and bolt on solar panel suppoert stand made of gi pipe of 50mm diamere and b class type with suitable arreangement for holding the panel, warning sign, polyethylene plastic with satuatory wrning with signs, tubular battery 12v , 100ah, 12 v, 100 ah c10 rating with full 5 year replacement warranty (tower battery) for energising the energiser

CTN :45720895

01 Jul, 2026 25.00 Lacs

Pali - Rajasthan

Tender For annual rate contract for annual maintenance and spare parts supply work of jcb machines. - cylinder liner, over haul gas kit, valve inlet exhaust, crank shaft, main bearing set, trust washer, piston, piston ring set, diesel main pipe, diesel filter pipe, thermo state elbow, air cleaner hose, diesel pump repair with parts, thermo state valve, connecting rod, con. rod bearing set, cam shaft bush, rocker arm, rocer arm shaft, gear cam shaft, water pump assy., oil pump assy., oil filter, belt, engine mount pad, exhaust elbow, engine throttle cable, engine stop cable, turbo charger assy., silencer exhaust abi, flang exhaust, element main, element secondary, auto tensioner, idler gear, engine fan, fuel filter assy., filter kit, engine connecting rod, fan drive puley, hyd. strainer, suction strainer, fuel injection pump, injector pipe, rubber hose, fuel filter assy., nozzle, return line, fuel module with sensor, fuel tank cap, fip repair with parts, radiator, radiator assy., coolent, hose top, hose cac (cold side), hose cac (hot side), radiator solding, front grill, front grill lock, front wheel and axle, axle service, center pin, axle stub, hub, hub stud, hub seal, seal cone, bearing inner, bearing outer, axle carrior l/h, axle carrior r/h, track rod, brake fri. plate, brake cou. plate, brake seal, brake oil 500ml, differential, differential gear planet, gear planet, bearing roller double, seal cassetle, bearing teper, tripling seal, stud wheel, carrior innulus, gear innulus ring, hub palentry, drive shaft, bearing roller, bearing teper roller, yoke, cross patti & bolt, cross holder, uj cross, bearing, brake, master brake cylinder, pipe brake l/h, pipe brake r/h, brake reserver, steering, coupling, bearing, rim steering wheel, self starter, self starter, solenoid, switch altinator, altinator puley, wheel belt 1232, rocker plate, field set, armature bush set, bearing assy., carbon set, bendex, armature, armature bush set, altenator, starter, cut out, rectifier plate, bearing, bearing plate, rotor, terminal, wiring and electrical, wiring harness complete, bettery cable, hour meter, head light bulb, tail light bulb, fuse and reley 15 amp, tail lamp, head light assy., ignition switch, wiper blade assy., harness roof, combination switch, fog lamp, body, side mirror, seat, wiper motor assy., wiper blade, catch window, latch l/h, wind screen front, glass outer l/h, glass outer r/h, rear window glass, door soccker, door hinge, lock set inner, lock set outer, door got set, door belt, transmission, transmission over, charging pump assy., counter plate, firction plate, transmission filter, bearing, bearing, torque converter, bearing, converter, drive plate kit, mounting, yoke coupling, lever assy. gea turret, selonoid valve assy., strainer, transmission filter, stabliser, steblizer piston, steblizer rod, inner leg steblizer, steblizer foot, pin pivot, adjuster, atb rear pad kit lower, atb rear pad kit upper, hydraulic, ind. steering suct, selonoid coil, hyd. filter assy., hyd. filter element, mrv, hyd. pump, repair kit, priority valve, ram seal, pump seal kit, pump steering, ramp bucket, ramp bucket, ramp bucket, ram, bucket lift cylinder ram, bucket tilt cylinder ram, boom ram, loader ram, loader jaw ram, dipper ram, slew cylinder ram, stablizer ram, steering cylinder ram, 6 in 1 ram, hose, hose-10-bsp 560mm, hose-08-bsp 1860mm, hose-10-bsp 2750mm, hose-04-10bsp 1825mm, hose-08-bsp 2620mm, hose-10-bsp 2520mm, hose-08-bsp 2860mm, hose-08-bsp 2650mm, hose-12-bsp 3900mm, pin and bush, bucket pin, pin, pin, tipping lever, pin dipper, bush, bush, pin, boom main pin, pin, pin top, pin pivot, pin pivot, pin boom ram, pin pivot, pin pivot, pin pivot, kpc kit and bush, bucket kit, seal kit, bucket seal kit, dipper seal kit, boom seal kit, seal slew kit, s t b, steering seal kit, loader seal kit, lift seal kit, bucket seal kit, rubber seal kit, boom seal kit, s t b kit, slew seal kit, loader seal kit, steering seal kit, loader and bucket welding, l

CTN :45709541

15 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of miniature circuit breaker, traction duty 240v ac, 2.5amps, single pole as per is/iec: 60898-1:2002 type c with extended connecting terminal but without fixation bracket for emus as per is/iec: 60898-1-2002( except for terminal arrangement. only which should be as per rdso drg no. skel-3700-alt-1)make-abb/schneider/havels/legrend or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45702689

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfc-1.bin no- 7.exmp.06.2026-27.08 description- scrap copper lump & sheets (comprising of fire bronze pieces, plats, stays, rivets, stude, rods, pipe etc) copper wire without insulation. copper boring & turning. our offer:- scrap copper miscellaneousllaneous with or without iron attachment. such as- rt dropper clip, catenery clip,contact tips for cgr (only copper), contact liver for cgr, bus bar, copper boring, plier, flexible shunt and mobile contact, scrap copper pipe,transformer oil cooler tube, rectifier bus bar , loop copper pipe, loader unloader pipe for a/c, half round oval contact copper, finger contact, stud bolt, copper ferule, carbon brush copper pigtail, copper tube, blow out coil for line contactor, r b shunt, shunt for armeter, blow out coil for shunting contactor, battery isolation switch, copper connecting angle, copper briddle wire, ptfe neutral section runner, section insulator runner, copper tubular terminal, discharge valve, copper socket, set of electrode & nozzle & other copper miscellaneousllaneous in bin no-7. qty=3686 kgs. loading will be done by purchaser's own arrangement.

Central Government/Public Sector

CTN :45356674

01 Jul, 2026 52.21 Lacs

Wani - Maharashtra

Tender For corrigendum : supply of chain corvryor any part no. 22203031700 , seal pack for roll back cylinder part no. 2220202051116 , conveyor chain part no. 1360317000 , bush for drive sprocket motor side part no. 22203030200 , bush for sprocket part no. 22203030300 , drive sprocket fixed part no. 22203030500 , drive shaft part no. 22203030600 , idler sprocket fixed part no. 22203031000 , idler sprocket part no. 22203031100 , track pin regular part no. 1360505101 , track chain link assly part no. 1360505114 , boom bucket bush part no. sb43958556 , bush movable sprocket part no. sbtb504045 , door opening cylinder part no. 22203032200 , boom bush part no. 22202022400 , track drive sprocket part no. 22201010200 , bush part no. 22203031120 , carrier roller assy part no. 22204040400 , traik roller ary part no. 22204040500 , idler roller assy part no. 22204040700 , tensioning screw part no. 22204040300a , spring part no. 22204040602 , recoil spring assembly part no. 22204040600 , track pin master part no. 1360505102 , track shoe tripple grouser part no. 22204040811 , sq. nut part no. 1360505400 , hex. bolt part no. 1360505300 , suction strainer part no. 10010000 , seal kit for bucket motor part no. 03020034 , return line filter element part no. 09010001 , triple tandem pump part no. 22206060100 , flp plug and socket part no. 1360800002 , seal kit for boom lift cyl.p.no.22202020 part no. 2220202061116 , seal kit for door opening cylinder part no. 2220303220914 , bush regular part no. 1360505103 , bush master part no. 1360505104 , element for pressure filter part no. 08010020 , slip ring assembly part no. 1420505030111 , traction mtr and mtn cntrl valve asembly part no. 04020000

Central Government/Public Sector

CTN :45702716

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p. l. no. 98980725 condemned and unserviceable signalling lead acid batteries 200 ah and 300 ah with / without connecting terminal bolts,lugs,wire and nuts, full / broken of sorts and sizes. it is permitted to drain acid / water and to remove vent plugs, if any. average weight- 20.986 kgs. per number approximately. total weight- 31900 kgs. approximately for 1520 nos. as is where is basis. rate per number should be quoted. note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery.

Central Government/Public Sector

CTN :45557116

02 Jul, 2026 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of piston w.c.r. p.n.4309077 4309176 , piston ring 4c seabird, part no. 4309022 , valve plate 4c seabird, part no.4309338 , bearing bush big 4c seabird p n 4309254 , thrust washer part n. 4309024 , terminal box part n. 4309505 , gasket set part n. 4309017 , crank shaft part n. 4305176 , piston w. c. r.p. n . 430108p1 4301176 , piston ring p.n. 430117r1 , valve plate double reed p. n. 4301332 , bearing bush body bush p. n. 4301256 , thrust washer p. n. .4322004 1 , terminal box part n. 4301505 , gasket set part n. 4301018 , crank shaft part n. 4301235 . , piston w. c. r. p.n .4322790 4322112 , valve plate double reed part n.4322760 , thrust washer part n.4322004 , terminal box part n.4322245 , gasket set part n. 4300002 , crank shaft part n. 4322561 , piston with connecting rod p.n. 4200024 , piston ring p.n. 4200336 , valve plate double reed part n.4200116 , bearing bush body bush part n.4200028 , thrust washer part n.4200392 , gasket set part n.4200162 , crank shaft part n. 4200061 , shaft seal part n.4000077 , o ring part n. 4200203 , oil pump set part n. 4201373 * /bid number : gem/2026/b/7656130 + /dated: 15-06-2026 ' ' / bid document 1 / 34

CTN :45647762

02 Jul, 2026 NA

Multi City - Multi State

Tender For supply of spare for generator transformer & cooling water system - winding temeperature transmitter, dual output: 4-20ma, 90-260v ac/dc, precimeasure , current converter unit ccu18, input-pt100 rtd, output: 4-20ma dc,90-260v ac/dc , digital winding temp. remote indicator, range-0-150°c, model no. 2245.t2, precimeasure , digital oil temp. indicator remote, range-o-150°c, model no. 2245.t2, precimeasure , mcb breaker 4 poles, 10a, 10ka, c-curve, 415v ac, siemens , mcb, 6a, 2 pole, 10ka, c-curve, 240vac, siemens , mcb, 16a, 2 pole, 10ka, c-curve, 2 40vac, siemens , mcb, 2a, 1p, 10ka, c-curve, 240v ac, siemens , mcb 10a, 1p, 10ka, c-curve, 240v ac, siemens , mcb, 6a, 2pole, 10ka, c-curve, 110v, ac, siemens , moulded case ckt breaker (mccb) 32a, 55ka, 4pole, 415v ac, siemens , power contactor, 4 poles, 415vac, 12a, 415v with add on 2no+2nc (aux. supply 110v ac)3tf31-10-0a , aux. contactor (ac supervision), 110v ac, 2no +2nc,3th30-22-0a , aux. contactor, 110v ac, 3no+1nc with add-on aux. contact block 2no+1nc,3th30-31-0a , motor thermal overload relay (4-6.3a),3ua50 001g , relay used in the cooler control circuit (minilec) minilec d1hls1 , time delay relay, 110v, 0.1-10h with 2 c/o contact, micon 2a5dt5 , selector switch 2 way with off, 6a, 240v 2 pole, type: s10-61025-bb, make: l&t/kaycee , selector switch, 10a, 440v, 2 ways with off 4 pole, make: l&t/kaycee , selector switch, 2way on off,10a, 440v, 10 pole , auxiliary transformer, 415v/55-0-55 (110v), 500va, make: l&t/kaycee , led (red, green) for pump on indicator suitable, 110v ac , differential pressure gauge (fiebig) 0-1.5 kg/cm 2 above to 380v 30w 50va , water leakage detector sapcon probe length 68mm , resistance temp. detector (rtd) for (wti and oti), pt 100, precimenasure , pump main & stan - by selector switch, , nylonwasher size 2.5tkx4 id x8 od , generator , carbon brush (50.8x38.1x25.4) mm, hm6 grd , brush holder , slip ring assembly (refer annexure-10) , insulation stud with epoxy with fire , retardant, shaft l= 315 from flange face, ø55, flange l 150, width 90, flange thickness 20, hole ø18, hole spacing(l) 108, hole spacing (w) 46 measurements in mm , duplex rtd pt/100 l-930, b-630, h 370 (mm) , dail type thermometer (dtt)l=35 m,.length of bulb--100mm, bulb coneection-standard p.f. 3/4 double union. 5 kg/cm2, type-gas filled, dial siz- 150 mm or 160 mm. accuracy+-2-degree celcus. (refer annexure-1) , thermostat for (guide bearing) , max operating voltage: 220v dc (±10%) , temperature range: 20°c to 100°c , max working temperature: 110°c , capillary tube length: 6 meters , switch action: 1 spdt for alarm and 1 for trip , (at two different temperatures) , differential temperature: 2°c to 5°c , accuracy: ±3°c of set point , repeatability: ±3°c , working temperature: 110°c ((refer annexure-2) , thermostat for lower guide bearing, (spec same as sl, 35) , thermostat for space heater (maximum current capacity: 1 amaximum operating , voltage: 250 vdc ±10%temperature range: 25°c to 90°ccapillary tube length (l): 5 meters switch action: spdtdifferential temperature: 3°c to 5°caccuracy: ±3°c of set pointsetting temperature:75°c for bearing & hot air40°c for heater controlrepeatability: ±3°c (refer annexure-3) , motorised valve, actuator type- k300 g1/g2a, enclosure -wt to ip 68, output speed-36 rpm, max tourque-305nm, motor 1.2 kw, 415v, average load-3.10a and locked rotor, 25a (roterz brand) , gate valve (1/2") brass , hex bolt m12*30 , hex bolt m12*50 , hex bolt m6*20 , hex bolt m16* 68 , stud m12*100 , cooling water system , moulded case circuit breaker (mccb), 500a 3p 50ka 415vac, mccb, with magnetic releases, dsine dn3-630m,500a, make-l&t , copper 220v mnx 550/650 spare coil cat no:cs94193(10 each) co , power contactor, 250a, 3p, power contactor with 240v ac coil, aux 2no+2nc contacts, mnx250, make-l&t latch relay, latch relay with 3no+1nc, 240vac coil aux supply with mechnical interlock electrical reset , aux contactor, auxilary contactor

State Government

CTN :45636157

03 Jul, 2026 NA

Karur - Tamil Nadu

Tender For annual rate contract for procurement of auto garage equipments spares- hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915 , battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., cylinder liner-hardened- 10 o/s make :liners india (1set = 6 nos), piston with pin and circlip (al - 401) make : ipl

Slip Ring Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government