Latest slip ring Tenders | Government slip ring Tenders

Central Government/Public Sector

CTN :45709067

18 Jul, 2026 45.00 Lacs

Roorkee - Uttarakhand

Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be

corporations/Associations/Others

CTN :45734337

20 Jul, 2026 NA

Parganas - West Bengal

Tender For urgent rewinding of rotor including replacement of damaged and burnt out components of 6 kv, 360 kw, ngef make slip ring induction motor for 100 cusec capacity swf pump unit. g at dlps.

Central Government/Public Sector

CTN :45380749

06 Jul, 2026 NA

Medak - Telangana

Tender For corrigendum : supply of lateral stopper plate(plate std-ms 75x75 thickness-16mm) for weigh-bridge machine, make: tulaman, erwb , mounting plates (200x200) std-ms is suitable for weigh- bridge machine, make: tulaman, model: erwb , top plate size(190x100x18 -04 nos) ms is suitable for weigh-bridge machine, make: tulaman, model: erwb , intelligent terminal - it5573-066 (along with jumbo display & key board glcd-analog) make: tulaman , loadcell 30t-lc610- 105 (cup & ball-analog) is suitable for weigh-bridge machine, make: tulaman , topcup 30t atc310-079 (std- ms 75 dia length-25) is suitable for weigh-bridge machine, make: tulaman, , bottom plate (std-ms 130x140 thickness- 20mm) is suitable for weigh-bridge machine, make: tulaman , dummy loadcells (std-ms height-224mm dia- 50mm plate: 125x135 thickness-8mm) make: tulaman, model: erwb , clamping plate (std-ms length-190 width- 100 thickness-16mm) for weigh-bridge machine, make: tulaman , wb hardware (m30x130lg bolt - 4 nos, 30mm nuts-4 nos, spring washer- 4 nos, plain washers -4 nos) , longitudinal stopper (ms) is suitable for weigh-bridge machine, make: tulaman, model: erwb , junction box - jbpcbwb-075 (jb-04-analog along with metal box) for weigh-bridge machine, make: tulaman , lateral stopper plate (assembly-std ms 50x25) for weigh-bridge machine, make: tulaman, model: erwb , service charges

Central Government/Public Sector

CTN :45738921

11 Jul, 2026 29.49 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of bolster bush part no 14205051000 , seal kit for roll back cylinder part no 1420202051015 , seal kit for boom lifting cylinder part no 1420202050914 , bush for drive sprocket motor side part no 22203030200 , idler sprocket fixed part no 22203031000 , idler sprocket part no 22203031100 , idler shaft part no 22203031200 , drive sprocket part no 14205050304 , idler wheel part no 14205050305 , verticle roll part no 14205050309 , horizontal roller part no 14205050311 , seal kit steering cylinder part no 14205052109 , spider assembly part no 14206061300 , seal kit for push plate cylinder part no 1420302050914 , element for inline pressure filter 08 part no 08010002 , flange part no 14206060132 , oil seal for fan motor part no 1420404100717 , pillow block bearing part no 14206063900 , relief valve part no 274hpesimp0102 , rear mechanical 6c drive shait part no 14206060600 , middle mechnical 6c drive shaft 142060 part no 14206060700 , front mechanical 6c drive shaft part no 14206060800 , slip ring assy part no 14205050307 , chain tension yoke part no 14205050306 , spider assly bolt hn13671050 part no hhb13672050 , priority unloading valve part no 274hpesimp0101 , twin screen oil cooler part no 14205050405

CTN :45738540

21 Jul, 2026 NA

Medchal-T - Telangana

Tender For supply of 10 pair ug jf communication cable , station line module analog board , l3 poeplus managed switch with integrated sfp transceiver modules , 12 core sm ofc cable , hdpe pipe , 2 pair pvc telephone cable , cat 6 utp cable , pvc conduits including laying of cat6 cable and 2 pair pvc telephone cable 2000 mtrs , 24 port loaded cat 6 utp patch panel , rj11 rj45 i o boxes , 4 port spu lpu , 5a 0 25a glass fuses , cable route markers joint indicators , excavation of trenches cat 6 utp cable 2150 mtrs , laying of 10 pair armoured communication cable laying of hdpe pipe laying of ofc cable 3250 mtrs , fixing and dressing of 12 nos of 6u network racks , 24 port fiber liu , 9u network rack , ofc patch cords of 2m length , cat6 patch cords 0f 2m length , provision of additional structured cabling in 10 work centers of cas as per scope of work , shifting of network rack end termination of telephone and cat6 cables and dressing of all cables splicing etc in e f facility , 20 pair weatherproof telephone junction boxes , open stage hfa ip phones with perpetual gateway licenses , digital handsfree telephone cli , installation commissioning programming and testing of above all items and provision of additional structured cabling for 01 year for any newly added

CTN :45736326

16 Jul, 2026 NA

Patiala - Punjab

Tender For supply of cover assy slip ring to drg no.emd part no 9581064 alt- q to spec.no. ems 479 rev-a , dlw/tot/veh/dd/ps/adhesive & sealants rev no. 06 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45736536

21 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of stud slip ring 3/8-16x4" as per drg.no. 8310266 alt ab [ warranty period: 30 months after the date of delivery ] ]

CTN :45730942

02 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of slip ring for emu canon tube of m/s medha part no. sptsa005973p0001. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733166

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfb-4.bin no-13 & 14.exmp.06.2026-27.03 description- scrap bronze,phosphorous bronze and other bronze scrap including suspension bearing with or without white metal ,bronze boring drilling (all type of bronze boring mixed with white metal &ferrous boring). our offer:-a) scrap brass miscellaneouswith or without iron attachment. such as:- brass parallal clamp, washar spring lock & bolt, brass material of nickle room, brass nozzle, tubular stay sleeve, swivel clip,arc horns for cgr, slip ring, top bush, bush bottom, broze filters, pg clamp for ohe equipment, brush holder assely, lock pad, brass boring, catenery splice for ohe equipment,, catenery suspention bracket, scrap brass of bmbc, c clamp for l/c, rt hook clamp, adopter for fuel gas, dropper clip, pressure regulator, oxygen regulator, hand cutting blow pipe, housing complete for earthing brush assembly, bush for wco & valve, gravity cock( brass), push type flushing valve, section insulator, catenery ending clamp and other brass miscellaneous bin no-13 & 14. qty = 4792 kgs. loading will be done by purchaser's own arrangement.