Web Analytics Made Easy - StatCounter

Slot Wedge Tenders

Get complete information related to latest Slot Wedge Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Slot Wedge Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Slot Wedge Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45633421 Due date: 03 Jul, 202603 Jul, 2026 NA
Tender For corrigendum : e5163079 rate contract for supply of im3302 slot wedge

State Government

CTN :45733040 Due date: 07 Jul, 202607 Jul, 2026 10.79 Lacs
Tender For i) supply of generator slot wedge fiber glass epoxy sheet g11/class f or above as per site requirement.(existing wedge is of size 30mm width x 4mm thickness x 232mm length with tapered ends) note- stator consists of 144slots with 05nos. wedges in each slot.ii)supply of generator slot liners texolite as per site requirement for tightening of all wedges (existing is of 25mm width x 1mm thickness x 1500mm) iii)supply of generator slot liners texolite as per site requirement for tightening of all wedges(existing is of 25mm width x 0.5mm thickness x 1500mm) iv)dismantling of existing stator slot wedges & slot liners v)installation of generator slot wedges & slot liners including all consumables such as epoxy resins, hardeners, thinners etc., complete for 144nos. of stator slots of unit 8 vi)testing charges to check the tightness of installed slot wedges (the testing shall be done by nabl-accredited agencies/ authorized agencies and submit reports)

CTN :45675369 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For auction sale of others - 01 defective battery charger of 220amp, make ¿ signotron (india) pvt ltd. 01 no. 02 released emergency battery charger 4 nos. 03 released regulated battery charger 08 nos. 04 scrap tension rod complete 04 05 scrap blower motor, 1.5 hp, 1400 rpm (lhb) 19 nos. 06 scrap rru 4.5 kw for tl coach 8 07 scrap condenser fan motor, 1 hp, 1400 rpm (lhb) 43 nos. 08 released bldc fan 400 mm sweep 180 nos. 09 scrap condenser fan motor, 1 hp (old) 01 nos. 10 released battery 120 ah, 6-volt vrla 12 nos. 11 released fire extinguisher 06 nos. 12 scrap condenser motor for icf type coaches 21 13 scrap dc motor for motoring. 1 14 released carriage fan 110 v ac 400 mm sweep 6 nos. 15 released led type emergency light (icf coach) 21 nos. 16 released led type emergency light (lhb coach) 24 nos. 17 released element lub oil filter 16 nos. 18 released air filter (inner & outer) 22 set 19 released mono pump frame 11 nos. 20 released tail lamp for icf type slr coach 15 nos. 21 released c check kit 29 set 22 released monoblock pump controller 18 nos. 23 released dynamo belt 7 nos. 24 released iv coupler 12 nos. 25 released water pump for cd engine 1 no. 26 released solid state inverter electronics 155 nos. 27 released feeder junction box 2 set 28 scrap electronic ballast watt 436 nos. 29 scrap lavatory light fittings 53 nos. 30 scrap led tube light fittings 81 nos. 31 released berth reading light (lhb) 16 nos. 32 released 24-volt starter battery charger 01 no. 33 released monoblock pump 0.5 hp 15 nos. 34 released brushless alternator 4.5 kw 14 nos. 35 released radiator core 6 lane copper core size -53¿x 48¿ (part-i & ii inside & outside) 01 no. 36 released axle pulley 4.5 kw, 13 ton 04 no. total ferrous - 6.3mt, total copper - 390 kg, al- 10 kg, lead - 54 kg

CTN :45675374 Due date: 09 Jul, 202609 Jul, 2026 NA
Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

Central Government/Public Sector

CTN :45419863 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For corrigendum : supply of magnetic slot wedges as per drawing no. 44026147596 rev. 02, item no. 01

Central Government/Public Sector

CTN :45591924 Due date: 27 Jun, 202627 Jun, 2026 NA
Tender For rate contract for supply of support bracket and other insulating item - support bracket, packing/stringing/clamping block, taper wedge, bracing plate and other similar insulating items of thickness size : greater than equal to 20mm and less than equal to 40mm, other dimension as per drg & matl specn aa 22414 (latest revision), rotor slot wedge (rectangular), bracing plate and other similar item to size: (5 to 10)tk x b x l (b & l as per drg) & matl specn aa22414 (latest revision), terminal support and other similar item to thickness size : greater than equal to 40mm & less than equal to 60mm, other dimention as per drg & matl specn aa22414 (latest revision)

Central Government/Public Sector

CTN :45395645 Due date: 22 Jun, 202622 Jun, 2026 NA
Tender For supply of slot wedge for hitachi armature as per drg. no.10-s-784-757 alt-c.conforming to spec no.f 0006 [shelf life-12 month] [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45154048 Due date: 20 Jul, 202620 Jul, 2026 NA
Tender For supply of stator slot wedge as per clws drg no. 4twd.096.050 (alt-3) clws specification no. 4tms 096.103 (rev-0) & clws str no. clw/tm/str/12060 [rev.-1]. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45046874 Due date: 08 May, 202608 May, 2026 12.36 Lacs
Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government/Public Sector

CTN :45006927 Due date: 07 May, 202607 May, 2026 NA
Tender For rate contract for supply of slot wedge and distance piece
 Loading, Please wait...

Connect us via What's Up