Latest smart meter Tenders | Government smart meter Tenders

CTN :45327983

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For 06/2026-27/ - deposit work(running work) in sub division masauli under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45327984

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For deposit work(running work) in sub division ramnagar under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45332966

11 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of electrician screwdriver thin stem insulated handle , electrician screwdriver thin stem insulated handle , knife double bladed electrician , neon tester , blow lamp brass , crimping tool , wire cutter and stripper , copper bit soldering iron , de soldering gun , contactor and auxiliary contacts , limit switch , rotary switch , relay cut out relays reverse current relays over current relays under voltage relays , pin type shackle type egg type and suspension type insulators , hydrometer , portable electric drill machine , load bank lamp or heater type , laboratory type induction coil , out side micrometer , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb , rccb , fuses , rheostat sliding type , capacitors , various lamps , bus bar with brackets , rubber mat , electrician helmet , safety belt , ohm meter series type and shunt type portable box type , digital multi meter , a c voltmeter m i analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a c energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester or clamp meter , megger , 3 point d c starter , 4 point d c starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering iron , discrete component trainer , linear i c trainer , digital i c trainer , electric induction plate , electric kettle , electric iron , immersion heater , a c ceiling fan and ac table fan , geyser storage type , mixture and grinder , washing machine semi-automatic , motor pump set , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , ink jet or laser printer , dc compound motor with starter and switch , thyristor igbt controlled d.c. motor drive with tacho generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , used dc generators series shunt and compound type for overhauling practice , motorised bench grinder , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , portable double telescopic ladder , 3 ph variac , rotary hammer drill 1 ph , lcr meter

CTN :45322365

15 Jun, 2026 4.99 Crore

Indore - Madhya Pradesh

Tender For to award a rate contract for supply of isi marked, dlms compliant, lt static single phase and three phase smart meters along with rf network interface card (nic) and box

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45345533

15 Jun, 2026 10.15 Lacs

Lalpur - Gujarat

Tender For supply of bending machine conduit pipe , bus bar with brackets 1 mtr , cctv camera kit , ceiling fan coil winding machine , conduit pipe cutting and threading machines , control panel , digital multi meter , discrete component trainer , dmx controller 512 , ev charger home 1 phase input , ev charger 3 phase input , file half round 2nd cut 250 mm with handle , file round 2nd cut 150 mm with handle , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals 16 amp , ladder - tower 3 meters on tyre wheels - min 10ft - max. 30ft , lux meter lcd read out 0.05 to 7000 lumens with battery. , magnetic flux meter , mallet barwood , meter reading instrument mri , potential transformer 415 v, 50hz, pt ratio, 440v.110v,10va , power factor meter digital , primary current injection set , rcc pole with accessories , rechargeable battery 12v,100ah , rubber mat , single phase transformer , single phase variable auto transformer , smart meter 3 phase - smart energy meter , soft starter , solar dc pump 1 hp , solar panel with battery 18 watt , solar street light , solar traffic light , solid state solar base single phase energy meter , spanner d.e. set , tachometer analog type - 10000 rpm , three phase transformer , wheat stone bridge ) /bid number : gem/2026/b/7576252 * /dated: 27-05-2026 & & / bid document 1 / 40

Central Government/Public Sector

CTN :45303989

30 May, 2026 NA

Raigad - Maharashtra

Tender For empanelment of nabl accredited electrical testing lab for testing of single-phase smart meter (gsm/cdma/rf/latest technology) as per is 16444 with latest amendment and is13779 (for accuracy requirement and acceptance tests)

State Government

CTN :45286001

29 May, 2026 14.96 Lacs

Haridwar - Uttarakhand

Tender For for work of doing mri of kcc and solar power consumers(those on whom smart meters have not been installed) under electricity distribution division, laksar, haridwar in o&m head.

CTN :45208627

25 May, 2026 3.36 Lacs

Chalakudy - Kerala

Tender For general smart meter implementation karalmanna lis renewal of ctpt unit tod meter and other accessories in transformer yard general electrical work

CTN :45219520

04 Jun, 2026 19.80 Lacs

Pulwama - Jammu And Kashmir

Tender For providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27

Smart Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government