Smc Junction Box Tenders

Get complete information related to latest Smc Junction Box Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Smc Junction Box Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Smc Junction Box Tenders .

Filter

Loading....

Get Tender in Email

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government/Public Sector

CTN :45382462

17 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : procurement of electrical spare items for electrical estate, bel bangalore - procurement of electrical spare items, switch sp,5amps,flush mounting (bel part no.990110006826), universal socket 5a (bel part no.990110005759), capacitor 2.25mfd (bel part no. 990110511808), open dp switch 32a (bel part no.990010298004), electronic regulator (bel part no.990072007852), heating element for geyser 2 kw (bel part no.990174051270), immersion heating element (bel part no.990110134672), water heater element round type (bel part no.990010298974), water heater element oveltype (bel part no.990010298295), thermostat (bel part no.990010074031), rigid pvc conduit 1" (bel part no.990010000666), pvc pipe-3/4"(19mm)dia (bel part no.990072023178), gangway box 1way (bel part no.990110027972), exhaust fan 250mm plastic body (bel part no.990010265412), insulation tape (different colours) (bel part no.995010234008), bioline gel(petrolium gelly) (bel part no.990210001351), hylum sheet 2400mmx1200mmx3mm-white (bel part no.990010000903), pvc casing & caping 20mm white (bel part no.990110020891), pvc casing caping 1" (bel part no.990010000434), piercng connectrs,16-95sqmm(abc) (bel part no.990010000693), led bulb 7w warm light (bel part no.990010204787), 50w led flood light luminaire (bel part no.990010002082), 200w led flood light (bel part no.990010213032), street light led fitting, 150w (bel part no.990010000994), led post top light fitting 40w (bel part no.990010224284), 4 sq mm, pvc, multistrand, cu wire (bel part no.990010000736), 2.5 sqmm, pvc, multistrand cu wire (bel part no.990010000735), 1.5sqmm, pvc multistrand copper wire (bel part no.990010000271), twin flat 1sqmm 2core cable (bel part no.990010298101), 2.5 sq-mm - 3core cu- cable (bel part no.990010000125), cable al armoured 4core,10sqmm (bel part no.990110033210), cable aluminium,4 core,16sqmm (bel part no.990110033113), al.flat cable 2.5sqmm,twin cor (bel part no.990110077636), al 2x16sqmm abc 2core cable (bel part no.990010297907), heat shrinkable cable jointing straight (bel part no.990074009447), cable jointing kit for 25 sqm (bel part no.990074008865), 1.1kv heat shrk st.jt-kit-3.5gx50sqmm (bel part no.990010190722), 1.1kv heat shrk st.jt-kit-3.5gx95sqmm (bel part no.990010190916), 10a - switch (make-anchor roma). (bel part no.990072037534), metal cutting blades (bel part no.995010827066), hole saw cutter 18mm (bel part no.990310305230), hole saw cutter 25mm (bel part no. 990310305327), hole saw cutter 30mm dia (bel part no.990010197124), hole saw cutter 50mm dia (bel part no.990010197221), high speed steel drill bit set (bel part no.990210763345), flat spaner set (bel part no.995010290462), rong spaner set (bel part no.995010290559), smc junction box 240x130x110mm2 (bel part no.990010002046), smc meter box (bel part no.990410000115), smc meter box (bel part no.990010000290), air blower (bel part no.990210742490), hot air blower (bel part no.990010272202)

Central Government/Public Sector

CTN :45465526

23 Jun, 2026 1.90 Lacs

Dhanbad - Jharkhand

Tender For repairing, testing servicing and of national resistors make 11 kv, 10 amp restricted neutral grounding system sl no. 1434, for tr-4, 33/11 kv at ramkanali substation, katras area

State Government

CTN :44539772

26 May, 2026 NA

Ukai - Gujarat

Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

Loading, Please wait...

Smc Junction Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government