Latest smps power supply system Tenders | Government smps power supply system Tenders

CTN :41026731

17 Jul, 2025 NA

Bareilly - Uttar Pradesh

Tender For providing of repair and overhauling service - ground power unit 40kva; ground power unit 40kva; yes; buyer premises

CTN :40611313

11 Jul, 2025 3.95 Lacs

Ghaziabad - Uttar Pradesh

Tender For bid to ras bid to ras corrigendum : providing of repair and overhauling service - ground power unit bison avish; avish; yes; service provider premises

CTN :41003511

14 Jul, 2025 NA

Budgam - Jammu And Kashmir

Tender For providing of repair and overhauling service - ground power unit 40 kva (gpu 40 kva); ground power unit 40 kva (gpu 40 kva); yes; buyer premises

State Government

CTN :40985789

28 Jul, 2025 3.50 Crore

Mohali - Punjab

Tender For purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connec

Central Government And Public Sector

CTN :40962628

14 Jul, 2025 5.81 Lacs

Rajkot - Gujarat

Tender For supply of inirepairfaultcltservicngandcompmaintenaceofpassengerlift 1tekr d d - liftservcie cleaningdoor setting , traction machine repairing , wiring charges mcb , ups lb1000va omglum , lead acid battery 12v 7ah , smpssmpslrs , smt009948vbatterycharging pcb , battery lug for 6sqmm , power monitorting device with single phasing preventer , mcb 50a wo shunttrip4pol , power switching device 18amp , contactor for power switching device , low power switch2co24v dc , load safety device omg lxr , square pb red majestica uparrow , regulated power source omgmw 124 , smt711 single 6pin smd led pcbpmc , positive door contact with clamp , limitswitch actuator , plateropfittingten bolt , plating rope fit stud , traction omg rope 7x193mm ss type , ad liner gutkha assembly for alu bottom , limit switchzv7h23611z1058 , pvcropeclamp10mmassembly , battery12v1dot2ah , landing aluminium bottom track 900mm , adjustable chair type bracket , plating ms stud m10 125 assembly , guide clip for 16mm guide assembly , adjustable counter weight chair type bracket , guide clip for 10mm guide assembly , chemical hit mmplus , pvc tiles 455mm 455mm 2mm , fevicol sr 998 , telephone main unit , telephone hand set unit in side the car , telephone hand set unit at ground floor , labour charges for fixing all items , comprehensive maintenance of 1 no13 passenger lift

State Government

CTN :40872630

11 Jul, 2025 19.46 Lacs

Udupi - Karnataka

Tender For re-insulation of 36 nos. of released stator copper bars of 115mw, bhel make generator of unit-1 at varahi under ground power house, hosangadi, kundapura(t), udupi(d). detailed scope of work is described in bid document which is binding on all the bidders.

CTN :40596261

31 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - extractor,electrical connector,plug, equipped slope and bank control dynamometer, equipped control dynamometer, structure,size 1 (t1f), structure,size 1 (t1f), structure,size 1 (t1f), vest part,small arms protective bod, densimeter, integral lighting plate, pillar drill, circuit card assembly, pass trough board, set 400hz measurment centre, cover (pilot junction plate), radar altimeter antenna, chronometer, lithium-ion battery, servicing connector//*ms*, tube assembly,metal, tube assembly,metal, lever,lock-release, lever,lock-release, battery storage, pressure gaige, shock absorber assembly, cylinder, 45g, utility battery, molecular sieve subassembly, body,jonction block,regulator,oxyge, anti-g actuator body sub-assembly, desiccant container , dehumidifier, fr5 receptacle assembly, load cell,terminated, programmable controller, distributed control system (mmi screen), ground power receptacle, rear mobile link, cable guidaance, eest calibration tool, front panel keyboard unit, usb key, relays circuit board, printed circuit board, main wheel heat shield assembly, plug,machine thread, 200/1 current transformer, clogging indicator, center pin, adapter,straight,hose to boss, oxygen hose (from regulator to manifold), 4mm test leads black 1m, 4mm test leads red 1m, battery, mviq spare battery pack, regulator, regulator,mpa, vacuum motopump, seat pyrotechnic connector, cover,access,aircraft, fairing,aircraft, fairing,aircraft, liner,location, scoop,aircraft, scoop,aircraft, fairing,aircraft, lever,remote control, weight simulator,aircraft component, leading edge, aircraft, bracket,structual component,aircraf, plate,retaining,electrical connecto, extension cable 1m gpe80-gpe80, cell calibration cable, electronic module,standardized, wheel rim solid tyre dl wheel rim, 24vdc fan

Smps Power Supply System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government