Latest snake cable Tenders | Government snake cable Tenders

corporations/Associations/Others

CTN :45294023

29 May, 2026 NA

Delhi - Delhi

Tender For replacement of snake cables and providing & fixing of stage boxes, microphones, antennas with synchronizing system at talkatora indoor stadium under bm-i(e) division.

CTN :45118134

29 Jun, 2026 NA

Patiala - Punjab

Tender For supply of complete control cubicle sb-1 along with all equipment and cabling (excluding control electronics) for wap7 loco as per specification no. clw/es/3/0194 alt.-j, and conforming to rdso modification sheets as per annexure-mod sheet rev.- 2 wap7 sb1/sb2, and str no. clw/2023/eldo/e/str/0168 rev.-0. [ warranty period: 30 months after the date of delivery ]

CTN :45084930

29 May, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of control room with cctv display and communication equipment at inhs patanjali - 55 inches video wall panel display unit with push bracket wall mount , surveillance system to distribute across 4 video display control unit , customised wooden fabrication work , centralisation horizontal double mounting siren 5 km , centralisation horizontal double mounting siren operates from 2 location switch control unit with armoured cable 4 core 3 sq mm 3 phase line power cabling piping and installation , poe gigabyte switch with 2 sfp modular , dual location displayunit operating system with wire mouse , installation of networking system configuration network cablling as per power cabling total entire setup

State Government

CTN :45126037

28 May, 2026 NA

Valsad - Gujarat

Tender For corrigendum : providing of annual maintenance service - audio conferencing system - av distribution amplifier; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - cabling and accessories; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - handheld microphone with desk stand; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - dual channel power amplifier- 1000 watt/channel; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - gooseneck microphone with pluggable lectern stand; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - audio mixer; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - controller equipment; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - main loud speaker assemble - 2 way; jbl; oem authorised service

corporations/Associations/Others

CTN :45305430

30 May, 2026 2.47 Crore

Multi City - Multi State

Tender For camc/amc shall include routine inspection, preventive maintenance, servicing, testing, cleaning, troubleshooting, fault rectification and breakdown support for hvac/vrv systems, fire alarm pa systems, cctv systems, epabx systems, electrical installations, it infrastructure and av systems including all associated equipment, panels, controls, cabling, accessories and minor consumables to ensure safe, reliable and uninterrupted operation as per oem recommendations

State Government

CTN :45231232

08 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by the contractor.

CTN :45261219

09 Jun, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

Central Government And Public Sector

CTN :45224067

15 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of supply, installation and commissioning of diesel generator and auxillaries as per specification , supply, installation and commissioning of lighting fixtures , supply, installation and commissioning of cable trays & accessories , supply, installation and commissioning of power cables , supply, installation and commissioning of common distribution board , supply, installation and commissioning of ups and vrla battery bank , supply, installation and commissioning of fire barriers , supply, installation and commissioning of cable tray support structure , supply, installation and commissioning of cabling system , supply, installation and commissioning of cable glands, lugs , supply, installation and commissioning of lighting system , supply, installation and commissioning equipment earthing leads , supply, installation and commissioning adg room louvers with its associated bird mesh

State Government

CTN :45230437

01 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For annual maintenance contract work for 03 years for electric panel board, cabling and earthing equipment in the authority office.

CTN :45014721

25 May, 2026 NA

Patiala - Punjab

Tender For corrigendum : complete panel-a to drawing no. clw/es/3/sk-2/2/0453 alt.- 1 and clw specification no. clw/es/3/0239 alt.- f for wap7 loco with push pull scheme, and complete panel-d to clw specification no. clw/es/3/0241 alt.- b, both panels a & d complete with all equipment, hardwares and wiring/cabling for wap7 loco and to str no. clw/2023/eldo/e/str/0168 rev.-0. note (a): firm to supply mushroom head push button switch (bpvg), blue colour, quantity: 02 nos (to be supplied as loose item along with panel a) & bpvr type push button with double no interlock to clw specification no. clw/es/3/0072 alt.-i, quantity: 02 nos are to be supplied with panel-a. [ warranty period: 30 months after the date of delivery] ]

Snake Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

Central Government And Public Sector

State Government