Get complete information related to latest Snubber Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Snubber Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Snubber Tenders.
Tender For supply of capacitor 0.22mfd+/-10% 2000 v of icar italy make type a-11-b-0.22-210 or epcos maketype- b 25990-51224-x 007 for bur input snubber of three phase locomotives as per clw spec no. clw/es/3/0448 alt-a. [ warranty period: 30 months after the date of delivery ]
Tender For supply of traction center machined for vb/ts, as per drawing: drg no. d-a675uv2-137352 rev-01., packing instruction: detail of revised packing instruction of traction center to plno. 33500113 1. the traction center to pl no. 33500113 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 3. the traction center to pl no. 33500113 should be packed in 15 nos in iron box pallet (returnable) / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 4. each packing should have an identification showing p.o. no., pl no. description, drawing no./spec., quantity, firm's name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. 5. in addition to this, the following instructions can be considered to be added to the packing instructions for ensuring proper identification and linkage of the items against the purchase orders:- 5.1 the item or its packing shall carry a qr code containing the details as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number (or lot number for bulk items) of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date 5.2 the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 5.3 in casethe above details are not available or the qr codes are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ]
Tender For supply of pm1 rectifier snubber capacitor (abb part no. 3bhe035244r0001) for m/s abb make auxiliaryconverter. make of capacitor m/s vishay (pec capacitor esta prop. emkp 2100, cn=1.5 micro fared 0/+10% un=2100v, u rms=900v) being used in existing auxiliary converters and suitable for auxiliary converter of m/s abb (product-aux_redesign). [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms
Tender For electrical wiring, supply and installation of electrical and electronic equipements for different weigh bridges of kulda ocp at basundhara area - wiring for circuit/ submain wiring alongwith earth wire with the 2 x 4 sq. mm + 1 x 4 sq. mm earth wire of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduitas required., copper cable lugs for 4 sq.mm, aluminium lugs for 35 sq. mm cable, supply , installation and commissioning of 5kva , 220/220v (p-n) air cooled isolation transformer in sheet steeled enclosure confirming ip-30 protection as per is-2147 including connection with 4.0 sqmm frls pvc insulated single copper conductor cable as required., supply and fixing of220v indicator light green & red, wiring for circuit/ submain wiring alongwith earth wire with the 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire of frls pvc insulated copper conductor, single core cable in surface/ recessed steel conduitas required., supplying and fixing 12 module (200mmx150nnm) modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required., providing and fixing 100 a,30ka,fpmccb rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required., supply and fixing of surge proctor device (spd) 5ka,220v., supplying and fixing metal box of75 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required, supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v c curve dp mcb complete with connections, testing and commissioning etc. as required., supply and fixing of window speaker intercom system anti-interference dual-way intercommunication microphone and speaker ., total impact of gst plus labour cess [@ 1 % (bocw cess to be deducted from the ra bill as per the value of the work progress)] for the purpose of ctc
Tender For supply and replacement of internal and external electrical installation at conference room, badminton room and other location in siri fort sports complex. - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the pointwith 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. (i/c rebate of replaced item).a) group c (dsr-2022,1.10.3), wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed pvc conduit, and earthing the point with 1.5 sq. mm f copper conductor single core cable etc. as required. (i/c rebate of replaced items)a) group c (dsr2022, 1.55.3), wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed meduim class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing (i/c rebate of replaced items) as required. (dsr-2022,1.12), wiring for light/ power plug with 4x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 2 nos. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. (i/c rebate of replaced items)(dsr-2022,1.13), wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, singlecore cable in surface/ recessed medium class pvc conduit as required. (i/c rebate of replaced items)a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (dsr-2022,1.14.1), b) 4 x 16 sq. mm + 2 x 6 sq. mm earth wire (dsr-2022,1.14.11), supplying and drawing following pair 0.5 mm dia frls pvc insulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ pvc conduit as required. (i/c rebate of replaced item). 1 pair (dsr-2022,1.18), supplying and fixing following size. modules. gi box along with modular base cover plate for modualr switches in recess etc. as reqd.(i/c rebate of replaced items) (a) 1 or 2 module (75mm x 75mm) (dsr-2022,1.27), supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (i/c rebate of replaced items)a) telephone socket outlet (dsr-2022,1.24.6), supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (i/c rebate ofreplaced items) (dsr-2022,1.25), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. (i/c rebate of replaced items) (dsr2022,1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. (i/c rebate of replaceditems) (dsr-2022,1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) (i/c rebate of replaced items) (dsr_2022)a) 4 way (4 + 12), double door, b) 6 way (4 + 18), double door, c) 8 way (4 + 24), double door, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the ex