Latest sockets Tenders | Government sockets Tenders

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

CTN :45349016

06 Jun, 2026 NA

Kamrup - Assam

Tender For supply of led bulkhead light (q3) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led batten light (led tube light) (v2) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , led garden light (v2) (q2)

State Government

CTN :45349237

06 Jun, 2026 NA

Anjar - Gujarat

Tender For supply of terminal ends for aluminium conductors of insulated cables (compression cable lugs) conforming to is 8309 (q3)

corporations/Associations/Others

CTN :45332552

16 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of wiring for light point fan point exhaust fan point call bell point with 1.5 sq.mm , earth wire , supplying and drawing following sizes of pvc conduit as required 1.5mm , modular plate , supplying and fixing two module stepped type electronic fan regulator on the existing modular plate , supplying and fixing modular blanking plate on the existing modular plate , supplying and fixing following size , 3 module 100mmx75mm , 4 module 125mmx75mm , 6 module 200mmx75mm , 8 module 125mmx125mm , 12 module 200mmx150mm , supplying and fixing suitable size gi box , 15x16 amps , a exhaust fan of all sizes. , modular plate and cover in front on surface or in recess , providing and fixing 25 a , mcb distribution board , single pole 6 to 32 amp , single pole and neutral 6 to 32 amp , single pole and neutral 63 amp , triple pole and neutral 32 amp. , 63 a tpn mcb 10 ka c curve , mcb db complete etc as required , 32 a 415 v c curve tp mcb , 600 mm x 600 mm x 6 mm thick watering pipe of 2.7 meter long etc. , providing and fixing 25 mm x 5 mm gi , providing and fixing 6 swg dia gi , led batten light 40 watt , ceiling fan 3 star rated with voltage range 90 v to 300 v 1200 mm , 300mmx12 inch sweep exhust fan , 50 w flood light 50 watt , sitc of building distribution panel indoor , 160 a 36ka fpmccb , aluminium bus bar 200 amp set of 4 strips 18 inch , digital metering devices , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories , supplying and laying of one number pvc insulated and pvc sheathed , supply and making end termination with brass compression gland and aluminium lugs , 2.5 kva sine wave inverter input 1 phase 3 wire and output 1 phase 3 wire with 2 nos of 12 v 200 ah battery , hot dipped galvanised iron cable tray 100 mm width x 50 mm depth x 1.6 mm thickness

Central Government/Public Sector

CTN :45347362

06 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of lan connectors, sockets and fo cable connectors

CTN :45332891

06 Jun, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of epg.1b.304.hln 4 position circular connector receptacle female elbow sockets solder , epg.1b.306.hln 6 position circular connector receptacle, female elbow sockets solder , fgg.1b.304.clad52z 4 position circular connector plug, male pins plug solder cup , fgg.1b.306.clad52z 6 position circular connector plug, male pins plug solder cup , egg.1b.304.cll 4 position circular connector receptacle, female sockets solder cup , egg.1b.306.cll 6 position circular connector receptacle, female sockets solder cup

Central Government/Public Sector

CTN :45333287

05 Jun, 2026 NA

Ambad - Maharashtra

Tender For supply of double hex sockets (q4)

Central Government/Public Sector

CTN :45329518

16 Jun, 2026 4.85 Lacs

Bikaner - Rajasthan

Tender For provn of installation of stabiliser of 40kva rating along with wiring power cables, schuko sockets and junction box at af stn nal under ge (af) nal

CTN :45326592

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for ece department - function generator frequency range: 0.1 hz to 5 mhz display: 4 to 6 digit led display output waveforms: sine, triangle, square, pulse, ramp . amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, strain gauge trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., temperature measurement kit sensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc). display: 3 digit led/lcd digital display (typically 200 mv fsd). temperature source: portable water kettle or heater block. signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntc thermistor probe, k-type thermocouple probe, patch cords and user manual., cathode ray oscilloscope bandwidth: dc to 30 mhz (-3 db) - sensitivity: 1 mv/div to 5 v/div - display modes: ch1, ch2, dual (chop/alt), add, sub - timebase: 0.2 s/div to 0.5 s/div (essential for slow bio-signals) - magnification: x 10 sweep magnifier - triggering: alt triggering, auto, norm, - tv-v/h with source selection (ch1, ch2, line, ext). - input impedance: 1 mohm || 25pf - included accessories: two 60 mhz passive probes, power cord, and user manual

CTN :45328819

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For equipment items - dual output regulated dc variable power supply-input voltage : 230v/50 hz ac.output voltage : (0-30)v dc.output current : (0-2)a.dcprotection circuit : over voltage, over current and short circuit protection.high efficiency : greater than 85 %.low ripple and noise less than 50 mv.digital display, digital ic trainer kit with breadboard:+5v dc, 1 a regulated power supply. 12v dc / 15v dc, 200 ma regulated power supply.solderless breadboard with minimum 840 tie- points, power distribution buses.zif(zero insertion force)ic sockets to accommodated 8 or 16 pin ics.logic input and output leds for output monitoring.16 buffered led outputs.16 debounced switch inputsvariable clock generator: 0.5 hz to 50 hz.single pulse output : 100 ms(buffered,positive and negative outputs).one seven-segment display with 4 bcd inputs.built-in logic switches.manual clock: debounced push-button(one pulse per press)., digital storage oscilloscope-bandwidth: 50-100 mhz. sampling rate: 1gs/sec.channels: 2 (minimum). power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface. c 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf accessories:2 xpassive probes (1x/10x), pcb prototype machine :manual software : copper cam & mach3 mill.resolution (x/y) : 3.125 micrometre.working area(x/y/z) : 200 x 300 x 120 mm.minimum width line and space : 0.1 mm (4 mil).maximum travel speed : 58 mm/sec(2.28 ).drilling range: 0.2 3.175 mm(8-125 mil).maximum drilling cycles : 50 cycles/minmain axle power rating : 300w.main axle rotating speed : 25000 rpm.maximum working speed : 3500 mm/min.feeding height: 120 mm.working drive : 0.02 0.05 mm.repositioning accuracy : 0.01 0.02 mm.supported formats : standard gerber, dxf, excellon.capability of processing various materials:fr4, copper clad, acrylic, metal, aluminium etc.power supply : 230v ac

Sockets Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector