Latest soffit Tenders | Government soffit Tenders

Central Government / Public Sector

CTN :41045028

21 Jul, 2025 NA

Haldia - West Bengal

Tender For supply of rhm25r7040 spares of weigh bridge like load cells/terminal boxes for weighing

corporations/Associations/Others

CTN :41052702

05 Aug, 2025 50.00 Lacs

Somnath - Gujarat

Tender For annual maintenance work for pwd branch with material & labours work year 2025-26 - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.ii in cement mortar., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. i r.c.c. work, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying compacted w.b.m. 100 mm. thick of grading i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying cement concrete 1gem3gem6 1 cement gem 3- coarse sand gem6- hand broken stone aggregate 40 mm. nominal size and curing complete excluding cost of form work in gema foundation and plinth, providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete, providing and laying cement concrete 1gem3gem6 1- cement gem 3- coarse sand gem 6- crushed stone aggregates 20 mm nominal size and curing complete including cost of formwork in a wall caps per coping, providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc slabs and landings, providing and casting in situ ordinary cement concrete m-200 forkerbsperkerb blocks including formwork, curing and finishing complete., providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level, white stone bela masonry block in course in foundation, plinth and super structure with stone of approved quality in cement mortar 1gem5 1cement gem 5 course sand including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 gem 4 course sand, providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. ii cement mortar 1gem4 1 cement gem 4 sand, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls for interior plastering up to floor two level and finished even and smooth including fini

CTN :41026365

31 Jul, 2025 NA

Thiruvarur - Tamil Nadu

Tender For supply of pac bid procurement of mrls spares d d - receiver cover spring , ratchet spring , ratchet , cocking lever connector assy , cocking lever subassy , retaining plate , cocking lever pin , cocking lever , plunger spring , cocking lever plunger , rail bridge , bolt catch pin , extractor spring , retaining pin , extractor , extractor pin , firing pin spring , firing pin , rear firing pin spring , firing pin retaining pin , receiver cover catch spring , gas regulator spring , bolt carrier assy , screw fore grip , fore grip , ejector , spring, ejector , pin ejector , pipe , piston , spring hammer , deflector , screw hand guard , trigger spring

CTN :41033775

18 Jul, 2025 8.18 Lacs

Multi City - Rajasthan

Tender For requirement of various spares parts for 100mt weigh bridge (make-techno scales industries, ahmedabad) unit-7 and8, ssctpp, rvun,suratgarh

Central Government / Public Sector

CTN :41001547

18 Jul, 2025 NA

Jagatsinghapur - Odisha

Tender For supply of procurement of dcu bridge crane spares

CTN :40821473

17 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of mechanical spares for m/s lnt make wagon tipplers and side arm chargers at chp, ssctpp, suratgarh - male-female v-block bracket assembly for platform support assembly for wt (l&t drg. no. 014195-m-bm-eq-ga-5306 rev. 0), male-female lateral location bracket assembly for platform support assembly for wt(l&t drg. no. 014195-m-bm-eq-ga-5306 rev. 0), end frame roller and bracket assembly for platform support assembly for wt(l&t drg. no. 014195-m-bm-eq-ga-5306 rev. 0), guide roller sub-assembly for platform support assembly for wt(l&t drg. no. 014195-m-bm-eq-ga-5306 rev. 0), weigh bridge roller bracket assembly for platform support assembly for wt(l&t drg. no. 014195-m-bm-eq-ga-5306 rev. 0), rotary cam limit switch arrangement without cam limit switch for sut(l&t drg. no. 013057-m-bm-eq-ga-5271 rev. 0), sprocket, no. of teeth 150, od 458 mm, pcd 454.82 mm, pitch 9.525 mm (3/8")(l&t drg. no. 013057-m-bm-eq-ga-5271 rev. 0), sprocket, no. of teeth 38, od 119 mm, pcd 115.34 mm, pitch 9.525 mm (3/8"), bore 0.4975 inch, fitted with woodruff key(l&t drg. no. 013057-m-bm-eq-ga-5271 rev. 0), rolkobo chain, simplex type chain no. 0120.0, chain length 2100 mm(l&t drg. no. 013057-m-bm-eq-ga-5271 rev. 0), sprung support roller assembly for sac(l&t drg. no. 014172-m-bm-eq-ga-5179 rev. 0), coupler & arm head assembly for sac(l&t drg. no. 014195-m-bm-eq-ga-5575 rev. 0), rubber cushioning pads, full pad type mi247 for charger arm and buffing arm assembly of sac(l&t drg. no. 014195-m-bm-eq-ga-5198 rev. 0), rubber cushioning pad, half pad type mi247 for charger arm and buffing arm assembly of sac(l&t drg. no. 014195-m-bm-eq-ga-5198 rev. 0), spring shaft for charger arm and buffing arm assembly of sac(l&t drg. no. 014195-m-bm-eq-ga-5198 rev. 0), rebound stop, 60 shore rubber(l&t drg. no. 014195-m-bm-eq-ga-5198 rev. 0), clamp arm cylinder rod pin, dia 90(l&t drg. no. 013057-m-bm-eq-ga-5228 rev. 0), main beam cylinder rod end pin, dia 30(l&t drg. no. 013057-m-bm-eq-ga-5228 rev. 0), main beam cylinder bush, dia 185(l&t drg. no. 013057-m-bm-eq-ga-5228 rev. 0), clamp arm cylinder end frame connection pin, dia 105(l&t drg. no. 013057-m-bm-eq-ga-5228 rev. 0), clamp pivot arm pin, dia 90(l&t drg. no. 013057-m-bm-eq-ga-5228 rev. 0), pivot pin, dia 35 for outer gripper cylinder (for wheel grippers)(l&t drg. no. 014195-m-bm-eq-ga-5436 rev. 0), pivot pin, dia 50 for outer gripper cylinder (for wheel grippers)(l&t drg. no. 014195-m-bm-eq-ga-5436 rev. 0), gripper bar 50 thk x 4000 for outer gripper (for wheel grippers)(l&t drg. no. 014195-m-bm-eq-ga-5436 rev. 0), pivot pin, dia 40 for inner gripper cylinder (for wheel grippers)(l&t drg. no. 014195-m-bm-eq-ga-5443 rev. 0), gripper bar 50 thk x 4000 for inner gripper (for wheel grippers)(l&t drg. no. 014195-m-bm-eq-ga-5443 rev. 0), apron conveyor gear coupling shear pin (as per drawing)

CTN :40950998

23 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of arrester barrier spares - sppr, nyloc nut m12mm with plain washer, plate large, plate small, winch cable, top mounting warning light (led), rubber pad (stopper), tension cable, limit switch, over ride safety limit switch, roller assy, packing, hex head bolt and washer m16x1.5x64mm long, suspension cable, rotary lip type seal 150180 (type4), wera plate, wear plate, sheave pulley assy, spacer small, winch cable, mast lamp assy, handle, limit switch, over ride limit switch, packing, cover rubber, shaft, suspension cable, remote control panel assy, vaccum circuit breaker (vcb) 11kv, shock absorber assy, gasket, belt, nut nylock (m12x1.75), pressure roller assy, leaf spring plate assy, blockin diode 50v1a, 1.5sqmm apc conductor (7/0.5mm) pvc isulated, 12core, 1100v grade as per is1554, contactor 220volt 22amp, o2 o/l over load relay, control relay auxiliary contactor, glass fuse 2amp&5amp, glass fuse, shock absorber, side plate large, side plate small, non hardening compound hold tie, indicating lamp up & down (il1-il), signal cable, bridge rectifier, shaft with two nyloc nuts m12x1.75 and washers, control relay with off delay timer la3-d22, nylon cordage braided 8901070, outside circlip dia 20mm, hex bolt nut with spring & plain washer m10x80mm long, ratchet lever hoist (3.2t) bi-directional, cordage nylon, belt (width 63mm,34oz,4layer,7m long), grease nipple m5, protective cover for shock absorber

Corporations And Associations And Others

CTN :40938717

04 Aug, 2025 NA

Hisar - Haryana

Tender For supply of electrical spares - electrical spares, digital synchronous timer for switching on/off operation, cycle duration -24 hours, maximum number of switchings 48 on-48 off, contact voltage/current rating- 240vac/16a, changeover contacts- 02 nos. din rail mounting type, minimum time interval 15 min for 24 hrs. make selec, l& t, c&s, abb, havells, legrand only, power contactor 80a, coil voltage-240vac, 1 no-1nc, din mounted , abb, schneider/havells/ lnt/ hager/c&s/legrand/bch only, mcb 16a, single pole, c curve, breaking capacity-10ka, make : abb, schneider/havells/ lnt/ hager/c&s/legrand/bch only, fuse hf type, 32 a, 415 v, fuse hf type, 63 a,415 v, magnetic oil level gauge (mog) for 12.5 mva rating oil type transformer.size 150mm , suitable for vertical mounting., timer on delay a1d1-x eapl ,3 sec-30min , din rail mounting type, pendent 6 waymaterial: high grade plasticvoltage rating:415 vaccurrent rating:5ampwith emergency stop & start/alarm, with ip65 dust proof for outdoor application, control transformer415/110vac, 500va , winding material - copper , maximum size in mm w x d x h = 160 x 100 x 200 , control transformer415/110vac, 300va , winding material - copper maximum size in mm w x d x h = 160 x 150 x 160, control transformer415/110vac, 1000va , winding material - copper maximum size in mm w x d x h = 150 x 150 x 180, control transformer415/110vac, 3000va , winding material - copper maximum size in mm w x d x h = 200 x 160 x 300, bridge rectifier input voltage 415 vac output voltage 190 vdc, fuse ctis, bolted type, 63 amp , 415 vac, fuse hbc, bolted type, 32 amp , 415 vac, hrc fuse base for 100a hn type fuse , 415 volt, limit switch with 1no + 1 nc , 415 volt , 50 hz , 1.5 amp .these limit switches should be equivalent to original installed model: bc9 t limit switch (jlsla) of jaibalaji make

CTN :40903374

21 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of spares of da cotrol panel - anti vibration mounts , exciter current rectifier 25a rating , buzzer with intermittent sound , power supply pcb battery charger for da lcp mcr panel , battery 12v , smps , signal conditioning module , switch type 2as 2-2p 22 5 dia 2 position , timing module 0-30 mins 230v ac a1d1x , pressure signal conditioning module , logic controller module for me lcp , logic controller module for mer , logic controller module , push button 22 5 dia type 2af green , push button mushroom red , rotary switch , indicator lamp 24v dc 22 5 dia type plbr green , indicator lamp 24v dc 22 5 dia type plbr red , remote hmi , connector , dc relay 12v 3 c o type mcc 24d , dc relay module 4 relay type , voltmeter 0-40 v dc 72 mm , mcb 2 p 10a , level switch , bridge rectifier , snubber capacitor , bolt m10x75

CTN :40899518

21 Jul, 2025 98.71 Lacs

Kota - Rajasthan

Tender For tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

Soffit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector

Corporations And Associations And Others