Latest software consultancy Tenders | Government software consultancy Tenders

Central Government/Public Sector

CTN :45343811

29 Jun, 2026 20.00 Crore

Delhi - Delhi

Tender For selection of agency for design, development, implementation and maintenance of an integrated financial and human resource management system (ifhrms)

Central Government/Public Sector

CTN :45263257

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of uhv deposition chamber - uhv chamber specification (vacuum better than 2 10-9 mbar uhv) chamber overview spherical (diameter 14 ) or equivalent square shaped uhv chamber with support frame equipped with three (3) x 2-inch magnetron sputtering sources. all cf flanges and uhv viewports/ss blanks, three (3) x 2-inch magnetron sputtering sources. each sputtering source has an individual gas inlet line for process gases. all cf flanges., substrate holder : diameter: 2 inches; heating molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature to 1000 c without rotation. rotation: substrate holder can rotate continuously, driven by a stepper motor. variable speed from 0 to 10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to the substrate surface, tilt adjustable. two sputtering sources mounted confocally at an angle relative to the substrate. base pressure: lower than 2 10 mbar (ultra-high vacuum)., vacuum pumping system: turbo molecular pump: pfeiffer hipace300 / edwards next 300 / leybold turbovac 350i with cf100 flange or equivalent with integrated controller, ion pump with controller: included to maintain uhv vacuum levels and provide clean pumping., backing pump: pfeiffer hiscroll 12 / edwards nxds 15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves : one cf100 and one cf150 manual gate valves for isolating the chamber from the pumping systems as well as throttling, vacuum gauges and measurement: one cold cathode gauge with readout capable of measuring vacuum pressures down to1 10-10 mbar for precise uhv monitoring., one capacitance manometer gauge with measurement range from 1 10-1 to 1 10 mbar for accurate pressure reading during deposition phase, gas delivery system: two independent mass flow controllers (mfcs):a. one mfc (0-100 sccm) for argon gas feeding to all three sputtering sources via high vacuum valves.b. one mfc (0-100 sccm) for nitrogen gas feeding directly into the chamber with its own high vacuum valve.gas lines for ar and n2 are physically separated to avoid cross-contamination., chamber access and viewports: 1. two view ports installed on the chamber, each equipped with manual shutters. 2. access ports for gauges, pump, gas inlet and few spares for future upgradation., baking capability: entire chamber designed to bake-out at 150 c to reduce contamination and out gassing during operation, cooling capability : water manifold with flow switch / flow meters, near uhv chamber specification: chamber overview: spherical (diameter 14 ) or equivalent square shaped uhv chamber with stand., three 2-inch magnetron sputtering sources, each with individual gas inlet. all cf flanges and uhv viewports/ss blanks., substrate holder: a. diameter: 2inches; heating : molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature (rt) to 1000 c without rotation b. rotation : substrate holder driven by stepper motor. variable speed from 0 to10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to substrate surface (tilt able preferred). two sputtering sources mounted confocally at an angle. base pressure : lower than 5 10 mbar (near uhv)., vacuum pumping system: turbo molecular pump : pfeiffer hipace 700 / edwards next 730 / leybold turbo vac 900 ix or equivalent with cf100 flange and integrated controller, suitable for near uhv vacuum., backing pump: pfeiffer hi scroll 12/edwards nxds15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves: one cf150 manual gate valve to isolate / throttle chamber from pumping system, vacuum gauges and measurement: cold cathode readout capable of dis

Central Government/Public Sector

CTN :45332300

16 Jun, 2026 NA

Delhi - Delhi

Tender For providing of annual maintenance contract of integrated security and surveillance system - as per tender document; comprehensive; as per tender document; consumables to be provided by service provider (included in the contract cost)

corporations/Associations/Others

CTN :45347652

06 Jun, 2026 NA

Seoni - Madhya Pradesh

Tender For providing of integrated security surveillance system service - supply and installation of cctv camera setup as per required demad; supply and installation of cctv camera setup as per required demad; supply and installation of cctv camera setup as per required ..

corporations/Associations/Others

CTN :45214163

05 Jun, 2026 14.60 Lacs

Chamoli - Uttarakhand

Tender For corrigendum : supply of bend pipe , nut bolt , cable 6mm aluminum wire , cable 4mm aluminum wire , cable 10mm aluminum wire , single core wire 01 mm , screwdriver drill , tape roll , pliers , flood light 100 watt , flood light 250 watt , flood light 500 watt , flood light 1000 watt , bamboo ladder 16 steps , complete fitting street light 45 watt led with bend pipe and wire , two core cable 25 mm , two core bunch cable , led bulb 25w rechargeable , led bulb 15 watt rechargeable , led bulb 40w rechargeable , led bulb 42 watt rechargeable , led bulb 30 watt rechargeable , rgb light , high mast pole 16m 08 flood light 200 watt , control panel 05 kv , control panel 10 kv , driver street light , sp 10 pole 8 meter , spike light flood light , insulator , laser light and sound system , solar street light ferro ion battery 20 watt semi integrated with complete fitting , solar street light ferro ion battery 20 watt fully integrated with complete fitting , bend pipe with clamp and nut bolt , armored cable 25 sqmm 2 plus 1 , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) ) /bid number : gem/2026/b/7529878 * /dated: 15-05-2026 & & / rate contract bid document this rate contract bid is governed by general terms and conditions of rate contract 1 / 34

Central Government/Public Sector

CTN :45341954

17 Jun, 2026 NA

Warangal-T - Telangana

Tender For supply, installation,training and commissioning of glove box system 2 port integrated with spin coater and antechamber

Central Government/Public Sector

CTN :45341960

17 Jun, 2026 NA

Warangal-T - Telangana

Tender For supply, installation,training and commissioning of glove box system 2 port integrated with spin coater

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

corporations/Associations/Others

CTN :45341932

29 May, 2026 9.10 Lacs

Parganas - West Bengal

Tender For supply, installation, testing and commissioning of 30kva ups system in connection with the work of setting up of an integrated control room at 1st floor conference hall of wbsap and cs, b wing, swasthya bhawan

Central Government/Public Sector

CTN :45332246

08 Jun, 2026 NA

Korba - Chhattisgarh

Tender For providing of annual maintenance contract of integrated security and surveillance system - camc of 54 nos cctv camera 30 nos 4 channel nvr 20 nos 1 kva ups installed at different locations of secl korba area along with auxiliary equipments including lighting damage for a period of 02 ..

Software Consultancy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors