Latest soil co2 flux system Tenders | Government soil co2 flux system Tenders

Central Government / Public Sector

CTN :45579038

30 Jun, 2026 NA

Digboi - Assam

Tender For supply of current transducer 0-2000a, output 4-20ma , ac voltage transducer , mw transducer - unidirectional 0-1a , pf transducer 0.5 0 0.5,output 4-20ma , frequency transducer dual output , mvar transducer 0-1a , dc voltage transducer

CTN :45577879

26 Jun, 2026 3.81 Lacs

Amber - Rajasthan

Tender For supply of supply of voltage transducer , pt input-110 vac , output- 4-20 ma ,corresponding to 0-4kv aux. supply- 220 vdc.suitable for vm12 type vcb of bhel make , supply of current transducer , ct input-1a , output- 4-20 ma ,corresponding to 0-1a aux. supply- 220 vdc.suitable for vm12 type vcb of bhel make , supply of 6a pt fuse suitable for vm12 type vcb of bhel make , supply of 220vdc indication lamps red- 20nos, green-20nos, blue-20 nos, amber-20nos , white-20nos , supply of tnc switch suitable for vm12 type vcb of bhel make , supply of voltmeter selector switch suitable for vm12 type vcb of bhel make , supply of ammeter selector switch suitable for vm12 type vcb of bhel make , supply of voltmeter -accuracy class-1.0 , pt sec.-110 vac scale- 0-3.3kv 96sq.mm suitable for vm12 type vcb of bhel make , supply of voltmeter -accuracy class-1.0 , pt sec.-110 vac scale- 0-2kv 96sq.mm suitable for vm12 type vcb of bhel make , supply of voltmeter - accuracy class-1.0 , pt sec.-110 vac scale- 0-10kv 96sq.mm suitable for vm12 type vcb of bhel make , supply of ammeter- accuracy class-1.0, ct sec.-1a scale- 0-1000a. 96 sq.mm , supply of fuse holder , supply of control circuit fuses 2a , supply of control circuit fuses 16a , supply of control circuit fuses 6a * /bid number : gem/2026/b/7670044 + /dated: 16-06-2026 ' ' / bid document 1 / 17

Central Government/Public Sector

CTN :45555679

23 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of voltage transducer dvl 1000 vpn 1000v. or similar as per attached annexure . [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

corporations/Associations/Others

CTN :45513067

22 Jun, 2026 NA

Nashik - Maharashtra

Tender For mpcb , contactor , mcb , power supply , relay with base , 8 way relay board , power supply , voltage transducer , current transducer , fuse 100a , fuse 500a , proximity sensor , ceramic heater , 3phase circuit breaker , inverter , module, cube 67 , cylindrical hrc fuse , line monitoring relay , auxiliary contactor , thermal overload relay , hrc fuse 200a , hrc fuse 400a , plc power module , plc cpu module , analog inpur output module , plc dc input module , temperature controller , reed switch , contactor and auxiliar contactor , safety relay , glass fuse , hmi panel with plc , analog input output module , digital input output module , ceramic connector , vaccum sensor head , vaccum sensor amplifier , heater 100 band , temperature sensor , fiber sensor amp , switch with roller lever , relay , main switch with handle , ceramic fuse with fuse holder , current control relay , plc , timer , roller micro switch with lever , ceramic fuse , air pressure sensor , elcb , fuse , inverter speed controller , plug in base , ethernet switch mpcb moeller type pkzmo-4 2.5a-4.0a in=4a, electromagnetic contactor moeller type dilm 12-10 , mcb moeller current rating 16a 3-pole, mpcb moeller type pkzmo-16 10-16a, electromagnetic contactor moeller type diler-40-g , power supply weidmuller i/p-230vac,2a o/p-24vdc,5a, relay with base weidmuller type rcl 425024 24vdc contact 8a, 8-way relay board omron type g2rl-1 coil- 24vdc 12a,250vac, power supply shavison type pl2425 i/p voltage 230vac o/p-24 vdc,2.5a, power supply shavison type -g31-120-24 i/p voltage 230vac o/p-24 vdc,5a, mcb siemens 6a 2-pole, voltage transducer rish rish con cv 63-500v, current transducer rish * /bid number : gem/2026/b/7631412 + /dated: 11-06-2026 ' ' / bid document 1 / 68

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

corporations/Associations/Others

CTN :45468496

22 Jun, 2026 22.01 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of transducer dc volt 0 to 600v , transducer dc 0 to 600 , dc voltage transducer input range , dc voltage transducer 0 to 75mv , dc voltage transducer 0 to 100mv d , dc voltage transducer 0 to 100mv , cubical fan 6pole , air flow monitoring unit with sensor , metrosil 5a c 620 , metrosil, 1a , oil pump assembly

corporations/Associations/Others

CTN :45406967

17 Jun, 2026 NA

Anpara - Uttar Pradesh

Tender For supply of ae make voltage transducer 765kv, input: 0-129.41 v ac, range: 0-900kv ac, ptr: 765kv/v3/110v/v3, , ae make voltage transducer 400kv, input: 0-137.5 v ac, range: 0- 500kv ac, ptr: 400kv/v3/110v/v3,

corporations/Associations/Others

CTN :45406944

23 Jun, 2026 NA

Luckwada - Chhattisgarh

Tender For supply of 1700001482 calibrator loop , 1700003242 sensor , 1700003641 transducer current , 1700007957 masibus isolator converter , 1700002289 indicator , 1700001923 counter event , 1700003303 smps , 1600304312 , 1600368279 swch pres elect hydac eds 3 0 16 b 25 , 1600019608 voltage converter , 1600035495 analog i p converter module , 1600035498 analog o p converter module , 2200001263 hdmi cable

Soil Co2 Flux System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others