Latest solar photovoltaic kit Tenders | Government solar photovoltaic kit Tenders

Central Government/Public Sector

CTN :45189659

11 Jun, 2026 NA

Kamrup - Assam

Tender For corrigendum : repair/maint to dg set/capacitor panel, street light fittings, high mast lights, solar lights, connected panels, electric timers and other allied works at basistha area under ge guwahati

CTN :45437069

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of good to match with existing surface complete all as specified and directed by eic , supply and fixing in repair modular metal flush box of 4 module with white cover plate including , supply and fixing in repair modular metal flush box of 6 module with white cover plate , material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick , supply and fixing of led wall light bed side light fitting for study table including 3 watt led, aluminium body, , supply only inner container ss or as per sample suitable for vertical type geyser 50 itrs storage capacity , supply only inner container ss or as per sample suitable for vertical type geyser 25 itrs storage capacity , supply only in repair thermostat 0-75 degree as per exiting size as per oems specifications complete all as specified and directed , supply only in repair heating clement 1.5 kw, as per oems specifications all as specified and directed , supply only in repair heating element 2 kw, as per oems specifications all as specified and directed , supply only indicator lamp with flexibe copper wire of suitable size red by green , supply and fixing pvc connection with steel reinforced pipe for hot water connection of size 18 inches x 1 by 2 inches , supply only apperture plate ss suitable for 25 by 50 itrs geyser along with rubber gasket, nuts, bolts, etc , supply and fixing in repairs plug top 15 by 16 amps suitable for geyser socket outlet complete all as specified and as directed , supply and fixing in repair stop valve but fancy type, chromium plated, screwed down cp of size 15 mm fancy type complete all as specified and directed. , supply and fixing in repair bib taps, cast copper alloy with butterfly handle, screwed down, screwed for iron pipe , supply and fixing of solar collector plate panel as per existing size, specification and make of capacity upto 200 lpd , supply and fixing of solar water heater tank as per existing size, specification and make of capacity upto 300 lpd , supply and fixing of cimfr certified led fiame proof batten suitable for single t8 tube of 20 watt, ip 65 protected , supply and fixing cimfr certified led flame proof bay light, 60 watt, well glass in die cast al housing with heat resistant toughened glass, ip 65 protected. 240 volt, , supply and fixing of flame proof weather proof rotary switch with cable termination box in lm 6 aluminium allcy housing single pole 16 amp, 250 volts , supply and fixing of flame proof-weather proof switch socket and plug combined 16 a, 250 v 2p plus earth , supply and fixing of flame proof weather proof switch socket and plug combined 32 a, 500 v 4p plus earth , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fm x m by fx f 3 by 4 inches dia 300 mm long , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fmxmfxf 3 by 4 inches dia 500 mm long , taking down copper by aluminium point wiring light, fan, socket or power complete, including fixture and fittings , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm nominal cross-sectional area pvc insulated unsheathed single core copper cable working voltage 1100 volts grade , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm pvc single core cable for one ceiling fan by exhaust fan point controlled by one, one way switch and regulator , supply and fixing for concealed conduit for one light point wiring 1.5 sqmm pvc single core cable for one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. , supply and fixing for concealed conduit for //bid details 3 / 81 one light point wiring with 1.5 sqmm pvc single core cable for one 3 pin 5 amps switch socket outlet point controlled by one switch on independent board. , supply and fixing for concealed conduit for one light point wiring with

CTN :45419054

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of supply and replacement, re-installation and testing of damaged, missing awlr , supply and replacement, re- installation and testing of damaged, missing 2 ai channel type datalogger, rtu with gsm and gprs based telemetry , supply and replacement, re-installation and testing of damaged, missing solar panel , supply and replacement, re-installation and testing of damaged, missing charger regulator , supply and replacement, re-installation and testing of batteries with all connectors , supply and replacement, re-installation and testing of damaged, missing lightening arrestor , supply and replacement, re- installation and testing of damaged missing nema4x or equivalent enclosure box , repair, maintenance, restoration, functional and calibration of sensors and data loggers for his sites , functional testing for data transmission accuracy, along with integration at data centre * /bid number : gem/2026/b/7592605 + /dated: 03-06-2026 ' ' / bid document 1 / 16

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

State Government

CTN :45363925

08 Jun, 2026 3.46 Lacs

Malerkotla - Punjab

Tender For repair of pump chamber ohsr water works and pipe line leakages new automated water controller solar panel and sluice valve etc

CTN :45238810

01 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - fixing & installation of solar panel & tv repair; electrical system or installation; service provider

Central Government/Public Sector

CTN :44976115

28 May, 2026 9.00 Lacs

Allahabad - Uttar Pradesh

Tender For corrigendum : repair / maint / servicing of various size and type of servo voltage stablizer / control panel and roof top solar power plant with allied miscellaneous works under age (i) af manauri

CTN :45063218

23 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of spares and repair of op wks generator sets c c - 5 hp wss pump , 5 hp submerssible pump , 3 hp submerssible pump , genr set 15 kva , genr set 5 kva , 10 hp diesel engine , 38 hp diesel engine , genr set 30 kva , 72 hp diesel engine pump , 70 hp elect motor with pump , genr set 10 kva , genr set 7.5 kva , pump set 43 hp , pump set 7.5 hp , genr set 12.5 kva , genr set 7 kva , solar panel , 65 hp diesel engine , 5 hp submerssible pump , 7.5 hp submerssible pump , fuel cell genr , 70 hp elect motor , 5 hp submerssible motor with pump , 65 diesel engine , 105 diesel engine , genr set 19 kva ) /bid number : gem/2026/b/7496162 * /dated: 02-05-2026 & & / bid document 1 / 76