Latest solar pumps Tenders | Government solar pumps Tenders

CTN :45655569

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of spares of ash slurry pump, drain sump pump , seal water pump of boiler 9 and dredge pump of tpp and cpp boiler - ash slurry pump, model: ar 300/550earlier pump serial no. : 15206-15208, cat. no. 09000512014 bearing housing material: is 210 fg 260part no. 3, cat. no. 0900051201 end cover (bearing cap outer) material: is 210 fg 260part no. 5, cat. no. 09000512012 expeller housing material: alloy cr (280-320 bhn) part no. 9, cat. no. 09000512013 expellermaterial: nihard type iv (550 bhn)part no. 14, cat. no. 09000512005 labyrinth (pump end)material: astm a 743 cf8part no. 14p, cat. no. 09000512006 labyrinth (drive end)material: astm a 216 gr wcbpart no. 14d, cat. no. 09000512017 lantern restrictor material: astm a 743 cf8mpart no. 13, cat. no. 09000512015 flange (suction cover)material: astm a 216 gr wcbpart no. 70, cat. no. 09000512026 grease retainermaterial: is 210 fg 260part no. 7, cat. no. 09000512027 split glandmaterial: astm a 216 gt.wcbpart no. 10, cat. no. 09000512004 piston ring (01 set = 04 nos.)material: is 210 fg 260part no. 51, cat. no. 09000512018 suction cover material: astm a 216 gr. wcbpart no. 21, cat. no. 09000512008 wear plate (s.side) with insert material: nihard type iv (550 bhn) part no. 19, 19i, cat. no. 09000512007 wear plate (b.side) with insertmaterial: nihard type iv (550 bhn)part no. 16, 16i, cat. no. 09000512001 shaft sleeve material: astm a 743 ca 15 part no. 12, cat. no. 09000512002 impeller with nut & boltmaterial: nihard type iv (550 bhn) part no. 18 & 38, cat. no. 09000512009 outer casing setouter casing top - 01 no.outer casing bottom - 01 no.material: astm a 216 gr. wcb part no. 20 & 15, cat. no. 09000512029 vary pitch pulley assembly (5 grooves)material: is 210 fg 260, overflow drain pump, model : vg 80/250+arsearlier pump serial no. : 15221-15222, cat. no. 09000510012 bearing cap-i (bottom)material: is 210 fg 260part no. 37.052, cat. no. 09000510003 bearing housing (top) material: is 210 fg 260part no. 36.052, cat. no. 09000510005 bearing cap i (top)material: is 210 fg 260part no. 37.053, cat. no. 09000510013 oil seal material: syn rubberpart no. 92.152, cat. no. 09000510004 bearing housing (bottom)material: is 210 fg 260part no. 36.053, cat. no. 09000510011 lantern ringmaterial: bs 970 en8part no. 46.10, cat. no. 09000510017 gland ringmaterial: ls 318 gt. ltb 2 part no. 46.9, cat. no. 09000510002 single shaftmaterial: bs 970 en8part no. 22.352, cat. no. 09000510014 strainermaterial: is 1239 part i heavy part no. 63.03, cat. no. 09000510010 shaft sleeve (p.end)material: aisi 410part no. 53.5, cat. no. 09000510001 impellermaterial: 27% hichromepart no. 24.2, cat. no. 09000510016 wear platematerial: 27% hichromepart no. 14.7, cat. no. 09000510008 bush housingmaterial: is 210 fg 260part no. 17.3, cat. no. 09000510006 bearing bedmaterial: is 210 fg 260part no. 35.152, seal water pump, model : tch+n 25/180-iearlier pump serial no. : 16882-16883, cat. no. 09000511009 shaft sleeve (p.end)material: aisi-410part no. 53.6, cat. no. 09000511007 lantern ringmaterial: aisi 410part no. 46.10, cat. no. 09000511015 gland split material: is 210 fg 260part no. 46.4, cat. no. 09000511013 oil seal set (pump and drive end) material: synthetic rubberpart no. 43.13, 43.3, cat. no. 09000511004 bearing adopter material: is 210 fg 260 part no. 37.21, cat. no. 09000511003 bearing housing material: is 210 fg 260part no. 36.7, cat. no. 09000511010 helicoil insertmaterial: aisi-316part no. 94.21, cat. no. 09000511005 deflector ringmaterial: aisi 304part no. 51.9, cat. no. 09000511001 impellermaterial: is 210 fg 260part no. 24.2, cat. no. 09000511002 pump shaft material: bs 970 en8 part no. 22.3, cat. no. 09000511011 stuffing box covermaterial: is 210 fg 260part no. 17.3, drain sump pump, model: vo 80/250+arsearlier pump serial no. 16522-16528, cat. no. 09000510101 bearing bed material: is 210 fg 260part no. 35.152, cat. no. 09000510102 ratchet collar material: ls 2062 ms part no. 53.852, cat. no. 0

CTN :45474143

29 Jun, 2026 22.28 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of spares of ash slurry pump model d-135 and clinker grinder of ash handling plant pump house stage-i at kstps kota under proprietary category- u seal 916-321(for ash slury pump) pt. no. 916-321 , suction sleeve 916-012 , shaft 916-305 , stuffing box 916-016 , shaft sleeve 916-022 , impeller part no. 916-029 , bell suction side part no.916-010 , bell liner suction side 916-011 , bell engine side part no. 916-014 , liner engine side 916-016 , discharge adopter , reducer 12 x 10" , bearing retainer ring 916-314 , oil level indicator , compression spring , oil gauge, 40 nb bsp p. no. 1 1/2" ispt , adopter sleeve 916-312 , flinger p. no. 916-026 , thrust coller , gland half , spares for clinker grinder assembly for ahp stage-l , 8"x8" tangential inlet , hydro ejector , assembly

State Government

CTN :45316465

01 Jul, 2026 1.02 Crore

Umaria - Madhya Pradesh

Tender For corrigendum : procurement of spares of pembril make fluid coupling model 23scr25b of ash slurry pump for ph- ii and model 41scr 24x for ph i and ii at sgtps, birsinghpur - spares for pembril make fluid coupling (model-23scr25b) of ash slurry pump for ph-ii, input shaft, scoop housing bracket, shaft, bearing cover, bearing nut, bearing liner, set bolt, locking washer, shaft ring, if fitted, self locking nut, casing plug for cover plate, oil retaining ring, locking washer part no.56, locking washer part no. 60, scoop housing shroud, counter sunk screw, self locking nut, key woodruff, circlip, end cover, circlip external, circlip internal, scoop housing assembly, impeller, joint collector ring impeller, bonded seal part no. 196, bonded seal part no. 182f, vent tube, connecting tube, leak of nozzel, joint scoop housing bracket, feed tube, pillow block, runner baffle, set bolt, self alinging bearing, spring if (fitted), scoop pin, dowel, runner, end cover, bearing liner, spares of pembril make fluid coupling (model: 41scr-24x) for ph-i&ii, operating rod, operating lever, joint centre spigot, control lever, woodruff key, bearing liner(23124), bearing liner (nu 228), scoop housing assembly, scoop tube assembly, feed tube, leak of nozzle set, centre spigot, shaft, bearing nut, bolt for multi disc unit, self locking nut, vent tube, locking washer/star washer, allen screw for liner, .

CTN :45496120

29 Jun, 2026 22.28 Lacs

Kota - Rajasthan

Tender For corrigendum : tn11194supply of spares of ash slurry pump model d-135 and clinker grinder of ash handling plant pump house stage-i at kstps kota under proprietary category - u seal 916-321(for ash slury pump) pt. no. 916-321, suction sleeve 916-012, shaft 916-305, stuffing box 916-016, shaft sleeve 916-022, impeller part no. 916-029, bell suction side part no.916-010, bell liner suction side 916-011, bell engine side part no. 916-014, liner engine side 916-016, discharge adopter, reducer 12 x 10", bearing retainer ring 916-314, oil level indicator, "compression spring 916-320(1 set of 8 nos.)", oil gauge, 40 nb bsp p. no. 1 1/2" ispt, adopter sleeve 916-312, flinger p. no. 916-026, thrust coller, gland half, spares for clinker grinder assembly for ahp stage-i, "8""x8"" tangential inlet hydro ejector assembly part no. a-218-r/l"

CTN :45578723

01 Jul, 2026 3.41 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe system to supply water for solar micro irrigation to deliver at farmers field up to 1 ha with a duty of 0.84 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for micro pressurized irrigation in distt. bilaspur in 135 ha. in kharif ( left side of bhaisajhar lift irrigation scheme. as indicated in index map), out of total gross command area, 135 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of bhaisajhar lift irrigation scheme as indicated in the index map for micro irrigation system without exceeding total power requirement for solar pumps with solar panel it includes all activities starting from investigation , planning ,design, drawing, construction of underground distribution network for micro irrigation system down to 1 ha chak in 8 ha consisting of providing, laying & fixing of all types of pressurized pipe lines with all necessary valves to serve as main line, branch line, distributaries, minors and sub-minors of pressurized irrigation system of bhishajhar lift irrigation project (to serve total cca not less than 135 ha in kharif ) including providing control at 4 ha and 2 ha with fixing multiple outlets with duty of 0.84 lit/sec/ha upto 4 ha and distribution network up to 1 ha chak, to serves the area as shown in index map with discharge of 3 times the specified duty at 1 ha chak including scada & successful trial run and commissioning and as per scope work and as directed by engineer-in-charge.. the work also includes formation of fpo as per company act/rule, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work. mou between agency and fpo to operate scheme after 05 years of mom and dl period and to arrange linkage facility to the fpo

CTN :45578895

01 Jul, 2026 3.42 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe distribution network lift irrigation scheme to supply water for irrigation to deliver at farmers field up to 1 ha with a duty of 0.70 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for pressurized irrigation by rotation in village kapua, block -patharia ,dist. -mungeli in 160 ha. in kharif (right side of khairi anicut as indicated in index map), out of total gross command area 270 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of khairi anicut as indicated in the index map for irrigation system without exceeding total power requirement for solar pumps with solar panel of 100 kwp.it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system , scada work with automation etc. for supply of filtered water for irrigation under pressure. the work also includes construction of chowkidar quarter, pump house, installation of solar power plant and sub station with transformer of required capacity by liasoning with cseb, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work

CTN :45579005

01 Jul, 2026 3.40 Crore

Bilaspur - Chhattisgarh

Tender For construction of pressurized pipe distribution network lift irrigation scheme to supply water for irrigation to deliver at farmers field up to 1 ha with a duty of 0.70 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for pressurized irrigation by rotation in village bandhapali, baghanpur, bundeli , baragaon and barpali block sarangarh ,dist. sarangarah-bilaigarh in 150 ha. in kharif (madhavpali anicut as indicated in index map), out of total gross command area 270 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of madhavpali anicut of dist- sarangarah-bilaigarh as indicated in the index map for irrigation system without exceeding total power requirement for solar pumps with solar panel of 110 kwp.it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system , scada work with automation etc. for supply of filtered water for irrigation under pressure. the work also includes construction of chowkidar quarter, pump house, installation of solar power plant and sub-station with transformer of required capacity by liasoning with cseb, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work.

CTN :45577380

27 Jun, 2026 9.51 Lacs

Sundergarh - Odisha

Tender For tender for supply of spares for ash slurry pump sam turbo industry private limited -ar150 510 sleeve , ar150 510 brg hsg , ar150 510 gland , ar150 510 expeller housing , ar150 510 expeller , ar150 510 suction cover , ar150 510 flange suc cover , ar150 510 o ring set , ar150 510 gaskets , ar150 510 pump pulley , ar150 510 motor pulley , ars50 200 delivery adopter , ars50 200 adopter coupling side

Central Government / Public Sector

CTN :45567177

07 Jul, 2026 NA

Nanded - Maharashtra

Tender For nanded division- provision of solar pumps, solar street lights and energy savers over the division.

State Government

CTN :45350053

30 Jun, 2026 55.04 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of critical spares of bottom ash hopper and slurry pump installed at ash handling plant at 2x600 mw, sstpp, mppgcl, dongalia.

Solar Pumps Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government