Latest solar system Tenders | Government solar system Tenders

Central Government/Public Sector

CTN :45741797

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply of spares components to earth leakage detector of anuvidyuth make. the set consists: 1. meter module (main card, insulation tester and panel meter), 2. channel module (channel card fittedwith accessories), 3. main module for add-on units, 4. channel card, 5. mains cards, 6. cable cards, 7. mother board, 8. panel meters, 9. transformer xr-273-3, 10. transformer xr-243-n1, 11. transformer xr-355, 12. terminal strips channel/mains, 13. display card, 14. test leads redx2+green, 15. frc connector for meter reading, 16. relay 4 change over, 17. multi turn pot 20k (mt), 18. reset switch mpu-2, 19. dc buzzer, 20. rotary switch, 21. euro9 connector 32 pin, 22. euro connector 48 pin and 23. 1m potentio meter for main module. firms offer: make/model: anu vidyut [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728381

01 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of panel module fcd 300 drg. no. emd pt. no. 40042250 alt l-1 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728523

01 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of panel module fcf 301 drg. no. emd pt. no. 40058133 alt l2 [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45735260

04 Jul, 2026 NA

Nagpur - Maharashtra

Tender For providing and instalation ongrrid solar system gram panchayat bhavan wag

Central Government/Public Sector

CTN :45735873

08 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply & installation of 1)separate conduit for positive and negative wire of 110v dc supply2) limiter module and 2a 2pole dc mcb (c curve) and 3) provision of power supply from sbc panel for fogpro make fsds of rev-04 or earlier version of specification rdso/2008/cg-04 to comply with modified clause 1.7 (a) of rdso specifications rdso/2008/cg-04 rev-6 amd - 1.scope of work & special conditions as per attached annexure. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45729458

09 Jul, 2026 58.23 Lacs

Ajmer - Rajasthan

Tender For tree plantation including fencing, tube well, solar system and drip irrigation system at jawaja block distict beawar.

State Government

CTN :45729459

09 Jul, 2026 38.56 Lacs

Ajmer - Rajasthan

Tender For tree plantation including fencing. tube well, solar system and drip irrigation system at dungriya khurd pushkar dist. ajmer

State Government

CTN :45721676

06 Jul, 2026 5.01 Crore

Nanded - Maharashtra

Tender For est no n2 1424 25 26 providing external electrification including street light water pump, 630 kva transformer lan accessories cctv system audio system diesel generator set and ups for power back up and on grid solar system to common load for newly constr

State Government

CTN :45721855

06 Jul, 2026 3.44 Crore

Nanded - Maharashtra

Tender For est no n2 / 1422/ 2025-26 providing street light, fire fighting system, 14 passenger lift (02nos), water pump, 315 kva transformer, lan accessories, cctv system, udiosystem, diesel generator set and 25 kwp on grid solar system to newly constructed taluka central

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Solar System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors