Latest soldering bar Tenders | Government soldering bar Tenders

CTN :44801694

29 Apr, 2026 NA

Panchkula - Haryana

Tender For supply of acid toilet 1 ltr , vim bar 250gm , bamboo broom stick , neel ujala 250ml , ezee 500gm , comfort 850ml , mosquito coil , scotch bright , dettol shop 100gm , rin shop 250gm , lizol 500ml , surf exel powder 1kg , bleeching powder 1kg , rat kill mortin , blade , talc powder 100gm , savlon 1ltr , vim liquid 1ltr , urinal cube , phynal kala gainda 1ltr , steel scrubber , dettol liquid 250ml

Central Government/Public Sector

CTN :44783106

28 Apr, 2026 90.70 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of procurement of raw materials d d -austenitic type (303 se) free machining non-magnetic bright quality stainless steel round conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size dia 8 mm x 2 to 3 meters in length , austenitic type free machining non-magnetic bright quality stainless steel square conf.to hal std 1206 , aisi-303-gr18/10 , sq 35mmx2 to 3 mtrs length , material austenitic type (303) free machining non-magnetic bright quality stainless steel hexagonal bar , specification hal std 1206 / 303 , astm a 582 size a/f 7 mm x 2 to 3 meters in length. , brass rounds confirming to hal std 1302 is 291 , grade-i , 1/2hard , bs 2874-gr.cz-112 , dia 4 mmx2-3mtr.long , aluminium alloy plate , specification en 485-2 , grade enaw6061 , condition t6/t651 (or) specification is 736 , grade 65032 , condition wp (or) ams 4027 size thickness 1 inch (25.4mm)x1250 x 2500 mm. , material aluminium alloy plate , condition t6/t651 , specification enaw 6061 , en485-2 , size thickness 12 mm x 1000 x 1000 mm , al alloy plate thickness 57 mm , temper t651 , spec (6061 , qq-a-250/11)/(6061 , astmb209)/(ams4027)/ (is 65032(hp20) , is736)/(6061-bsh20 , en 573-3/en 485-2) /(enaw6061 , en573-3/en 485-2)/(uni9006/2 , en573-3 , en 485-2) /(din almg1sicu 3 , 3211 , en573-3/en 485-2)/ size 57x 1000 x 1000 mm , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 16 mm x1000 x 1000 mm. , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 18 mm x1000 x 1000 mm. , aluminium alloy plate , specification en 485-2 , grade enaw6061 , condition t6/t651 (or) specification is 736 , grade 65032 , condition wp (or) ams 4027 size thickness 20 mm x1250 x 2500 mm. , al.alloy sheet thickness 1.6 mm , condition t6 , spec 6061 , qq-a-250/11 or qq-a-327 size 1.6 x 1000 x 1000 mm with pvc coating on both sides , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 31.75 mm x1000 x 1000 mm.

Central Government/Public Sector

CTN :44792385

16 Apr, 2026 NA

Jhansi - Uttar Pradesh

Tender For different sizes stud bar, material- bright bar (one set consists 02 item with same quantity asper annexure a) material test certificate from nabl approved lab must be provide at the time of supply. [ warranty period: 12 months after the date of delivery ]

CTN :44758184

20 Apr, 2026 NA

Dehradun - Uttarakhand

Tender For supply of al. alloy sheet 15 mm thick x 1000 mm wide in running length of 2 mtrs. to spcn. is: 736-86, gr. 24345, in , titanium unalloy round bar 32 mm to spcn. is: 11902-86, grade-b in running length of 2 mtrs (9927094810 , aluminium alloy round bar 85 mm dia to spcn. is: 733-83, gr. 24345, wp cond. in running length of 2 to 3 , aluminium alloy flat 32 mm th. x 400 mm wide x in the stand. running length, to spcn. is: 736, gr. 24345 i , al. alloy rod as per is 733, gr: 74530, 20 mm dia in the runn- ing length of 2 mtr and above. (99270772 , sheet al. alloy 8 mm thick x 500 mm wide to spcn, is: 737-86. gr24345 wp in running length of 2 mtrs. (9 , aluminium alloy sheet 0.5 mm thick x 500 mm wide to spcn. is: 737, gr. 24345 wp in running length of 100 , titanium alloy rod 65 mm dia, bt-1-o ost1-90013-81 or is: 11902-86 grade" b" in running length of 2 mt , copper aluiminum bronze rod 60 mm dia to spcn. bs: 2874-80, ca 103" m" cond. in running length of 1.5 mt , al. round bar 30 mm dia to spcn. is: 733, gr. 74530 in the run-ning to 1 mtr or above. (9927085268) , brass tube to spcn is: 407: cuzn37(t. a) o. d. 38mmxwall thickness 10mm (t38x10mm) (9927094040) , al. alloy sheet size 0.8 mm thick to spcn. is: 737, gr. 24345, inwp condition x 500 mm w x 2500 mm long ( , al. alloy rod 100 mm dia to spcn. is: 733 gr. 24345 or equvalent2014a" tf" cond. in running length of 2 m , aluminium alloy rod 40 mm dia(+ 2 mm on dia is also acceptable) to specn. is: 733, gr. 24345 in wp cond. in , alluminium alloy round bar size 80 mm dia to spcn. is: 733 gr. 24345, 2 to 3 mtrs long in wp cond. (992 , steel low carbon free cutting round bright bar 20.0 mm to spcn. is: 7283 gr. 10c8s10 of is: 4431 (99270 , titanium unalloy rod of 25 mm dia spcn. is: 11902, type gr. " b" in running length of 2 mtrs (9927087412

Corporations And Associations And Others

CTN :44700648

07 Apr, 2026 13.76 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi - supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg

CTN :44512556

07 Apr, 2026 NA

Jalgaon - Maharashtra

Tender For corrigendum : supply of nds size-19mm dia. to gr. t90mn6wcr2 to is: 3748-90 (2nd rev) cold drawn, annealed, bright bar, initial , non deforming steel, size 28 mm dia, to gr. t90mn6wcr2 to is: 3748-90 (2rev) cold drawn, annealed, br , chromium steel 8mm dia as per bs- 970. specn en-31 or is: 3748-1990. gr t105cr5. centreless ground and , chromium steel 13mm dia as per bs-970 specn en-31 or is: 3748-1990 gr. t105cr5 centreless ground and a , chromium steel 16 mm dia. to bs-970 specn. en-31 or is: 3748-90 gr t 105 cr5 mn2 centreless ground anne , silico mangenese spring steel size: 17mm dia silico mangnese spring steel. oil hardening silico mangne , silico mangenese spring steel 19mm dia, oil hardening quality, is: 3748-1990, gr. t55 si7 in hot roll , chromium steel 09mm dia, bs-970, specn en-31, is: 3748-1990, gr t105 cr5 centreless ground bright b , high carbon high chromium steel rod size: 19mm dia. to specn: xt160cr12, is: 3748-1990 in cold worked con , non deforming steel 16mm dia grade t90 mn6 wcr2 to is: 3748-90 (2 nd rev) cold drawn, annealed, ma

corporations/Associations/Others

CTN :44685722

03 Apr, 2026 NA

Multi City - Multi State

Tender For supply of the following stainless steel raw materials. ,austenitic stainless steel round bar dia 22mm x 6 mtrs length, grades:ss 321 annelead condition, finish bright, conforming to astm a276, make: tata/sail/jindal/eqvt 6 nos ,austenitic stainless steel round bar dia 25mm x 6 mtrs length, grades:ss 321 annelead condition, finish:bright, conforming to astm a276, make: tata/sail/jindal/eqvt 6 nos ,austenitic stainless steel round bar dia 30mm x 6 mtrs length, grades:ss 321 annelead condition, finish:bright, conforming to astm a276, make: tata/sail/jindal/eqvt 4 nos ,austenitic stainless steel round bar dia 32mm x 6 mtrs length, grades:ss 321 annelead condition, finish:bright, conforming to astm a276, make: tata/sail/jindal/eqvt 4 nos ,austenitic stainless steel round bar dia 35mm x 6 mtrs length, grades:ss 321 annelead condition, finish:bright, conforming to astm a276, make: tata/sail/jindal/eqvt 15 nos ,austenitic stainless steel round bar dia 40mm x 6 mtrs length, grades:ss 321 annelead condition, finish:bright, conforming to astm a276, make: tata/sail/jindal/eqvt 10 nos chemical analysis testing charges for items 1 to 6 ,tensile testing charges for all items igc test charges for all items

Central Government/Public Sector

CTN :44536831

17 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply, installation, testing and commis [supply, installation, testing and commissioning of led 3d letter signage board of bi/angulage (hindi, english) dimension of (14 feet x 2 feet) each of 02 nos of 02 languages total of 56 sq. feet , structure frame made by gi square bar of (25x25x3)mm (40 x40x 3)mm rectangular tube of (40 x 30x3)mm and gi angle (35/65x 5) mm as per requirement size of the frame for installation of letters and letters should be fixed in frame, letters are made of acrylic sheet of 2mm thickness letter inside fitted with hi-bright water proof led s module (each led min 1 watt) of make-samsung, osram or similar with all provision for setting and arrangement size of board, n.b - text massage , design of letter and colour of the board shall be approved by consignee before installation. (warranty period : upto 30 months from the date of delivery.)]

Soldering Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

Central Government/Public Sector