Latest soldering stick Tenders | Government soldering stick Tenders

CTN :40134775

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For custom bid for services - 2 years so for isbl piping jobs-1) pre-fab : fillet j, pre-fab : butt joint (cs), pre-fab : rf pad cs weld joints, pre-fab: corrosion pad cs weld joints, pre-fab: corrosion pad (cs) with shoe, pre-fab: fillet joint (alloy steel) tig, pre-fab: fillet joint (ss) tig, pre-fab: fillet joint (dss/sdss) tig, pre-fab: fillet joint (inconel/monel) ti, pre-fab: butt joint (alloy steel), pre-fab: butt joint (ss), pre-fab: butt joint (dss/sdss), pre-fab: butt joint (inconel/monel), field: fillet joint (cs) tig, field: butt joint (cs), field: rf pad cs weld joints, field: corrosion pad cs weld joints, field: corrosion pad (cs) with shoe supp, field: butt joint (ss), field: butt joint (alloy steel), field: butt joint (dss/sdss), field: butt joint (inconel/monel), pre-fab : rf pad as weld joints, pre-fab : rf pad ss weld joints, pre-fab: corrosion pad ss weld joints, pre-fab: corrosion pad as weld joints, pre-fab: corrosion pad (ss) with shoe, pre-fab: corrosion pad (as) with shoe, field: corrosion pad ss weld joints, field: corrosion pad as weld joints, field: rf pad ss weld joints, field: rf pad as weld joints, field: corrosion pad (ss) with shoe supp, field: corrosion pad (as) with shoe supp, overlay patch - cs-upto 6mm thick, overlay patch - as/ss-upto 6mm thick, overlay patch - inconel/monel-upto 6mm t, inlay patch - cs - upto 6mm thick, inlay patch - as/ss - upto 6mm thick, inlay patch - inconel/monel - upto 6mm t, weld run - cs (tig), weld run - cs (arc), weld run - with ss/as electrodes, weld run - with ss/as filler, weld run - with dss/sdss filler, weld run - with dss/sdss electrodes, weld run - with monel/inconel filler, weld run - with inconel/monel electrodes, non-pressurized piping welding joint, bending of plate for patch welding jobs , hot bending of pipe/tube below 1.5" dia, cold bending of pipes/tube below 1.5" di, rolling of plate into pipe, replacement of structural beams/columns , replacement of structurals-angles flats , replacement of grating/chequer plate (by, replacment of gratings (with welding), pipe clamp fabrication, blind fabrication, plate flange fabrication, welding of pin holes/spot welding (excep, fabrication of sample cooler coil n repl, dp test(piping), dp test(other than piping), dp test - surface area/tube sheet, mobilization of closed proximity radiogr, radiography upto 1.5" dia. - rate applic, radiography - above 1.5" dia. and upto 3, radiography - above 3" dia. and upto 6" , radiography (above 6"), radiography(other than piping), stress relieving upto 1.5" dia. - applic, stress relieving above 1.5" and upto 3" , sr - (above 3"), sr (other than piping), mobilisation of wfmpt/ufdt equipment wit, wfmpt, ufdt, mobilization charges for digital radiogr, hardness test, replacement of hexmesh (shell connected , replacement of hex mesh (inside cyclones, manual cleaning of piping/eqpt, copper slag / grit blasting, painting of zinc silicate, painting of zinc phosphate, hiring of mobile crane, supply and operation of tractor trailer, supply and operation of jeep/pick-up tru, hiring of air compressor - weekly, running hour rate for air compressor, supply and operation of diesel de-wateri, blind removal/installation, threaded fittings, valve - dropping/ installation, insulation removal, hydro test of pipelines, system scaffolding - rate per block 2.5m, manway opening/box-up, cold cutting of pipelines, bolts cutting with hacksaw/grinding/gas , chipping - rcc/ refractory, chipping - pcc, pcc - 1:4:8 ratio, pcc - 1:1.5:3 ratio, rcc of 1:1.5:3 ratio, excavation and back filling, provision of concrete box to arrest leak, replacement of ss anchors, replacement of cs anchors, replacement of inconel anchors, unplugging as per operation, tech data entry services, addtnl hrs : tech data entry srvcs, cs welding crew at workshop/fabrication , cs welding crew at unit/site, cutting crew (gas cutter/grinder), rigging crew, ss/monel/inconel welding crew at unit/si, ss/as/monel/inconel welding crew at shop

CTN :40135542

16 May, 2025 NA

Ahmedabad - Gujarat

Tender For supply of pvc bends , 110mm dia swr pvc bends , 75mm dia swr pvc pipe clamps , 110mm dia swr pvc pipe clamps , size 3 hydraulic door closer bearing isi mark to carry door a width upto 1000mm , engine oil 2t , turpentine oil , water thinnable cement primer alkali resistant , zinc chromate primer yellow , aluminium paint , synthetic enamel paint , road marking paint for asphalt surface water based , acrylic exterior emulsion paint , super acrylic emulsion paint internal works , crack filler in form of paste , wire brush for painting activities , soft brush for painting activities , wall putty white 20 kg per packet , 6mm commercial plywood with commercial ply on both faces , 12mm commercial plywood with commercial ply on both faces , coarse river sand , water proofing material conplast wl , wire nails , tile or stone fixing adhesive for granite or vitrified tile , stainless steel fly proof mesh grade 304 , 500 ml capacity anchor bolt fixing chemical injectable mortar , 25 kg bag capacity the fenvel of dp insecticide fenvelarate 0 point 40 percentage dp , single phase welding machine 220 amp , ewc pan with p trap , ewc pan with s trap , iwc orissapan with p trap , wash hand basin 550x400mm , plastic seat and cover , cp fittings 15mm brass stopcock , cp fittings 15mm brass stopcock concealed , 15mm swivel type shower with cp shower arm , coat and hat hook double type , towel rail 25mm dia 600mm long , 32mm bottle trap with wall flange , open type flush valve 25mm , long necked bib tap 15mm , rubber sheet 3mm thick , 15mm n b 1 point 23 kg per m gi medium grade pipes bearing isi mark conforming to is 1239 , 15mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , 20mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , 50mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , door cap pvc 75mm , door cap pvc 110mm , solvent cement 250ml , 15mm dia hexagonal nipple , ptmt bib cock 15mm , ptmt bib cock long body and flange 15mm , ptmt stop cock 15mm dia male threaded , ptmt pillar cock , ptmb ball cock and hd ball 20mm dia , ptmt shower arm with flange 225mm , pvc health faucet 1 point 2 m length , pvc connection pipe 18 inch , upvc ball valve 40 mm , extension nipple 15 mm , upvc brass tee 15mm , upvc reducer socket 25 x 20 mm , upvc reducer socket 20 x 15 mm , upvc elbow 25 mm , upvc reducer elbow 25 x 15 mm , upvc reducer tee 32 x 25 mm , upvc coupler 40 mm , upvc reducer socket 40 x 25 mm , upvc reducer socket 40 x 32 mm , upvc fta 15mm , upvc elbow 15mm , 15 mm gi clamp , 20 mm gi clamp , 25 mm gi clamp , 32 mm gi clamp , 40 mm gi clamp , 75 mm gi clamp , 110 mm gi clamp , bombay nail 2 inch , bombay nail 4 inch , waste pipe roll length 30m , wash basin socket , 35 x 8 mm screw , 32 x 8 mm screw , 19 x 6 mm screw , 30 x 7 mm screw , 70 x 1 mm nail without head , nail 2 inch , pipe wrench 14 inch , pipe wrench 18 inch , screw driver , plier , hammer with wooden handle 1 point 35 kg , chisel , adjustable spanner

State Government

CTN :40121502

05 May, 2025 NA

Bhandara - Maharashtra

Tender For supply of circuit breakers for dc operation (q3) , welding rods and filler wire for gas shielded arc welding of structural steel as per is 6419 (q4) , fabricated pvc - u fittings for portable water supplies as per is 10124 (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , stainless steel rectangular / square tube (q3) , garbage bags (q2)

Central Government / Public Sector

CTN :40122947

08 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of flux cored mig/mag welding filler wire size 1.2mm dia. with shielded gas, class vii conforming to spec. no. irs: m-46/13 with amendment no.1 (grade e309t1-1 as per aws: a 5.22-10). shelf life: 9months from the date of re ceipt in stores or 12months from the date of manufacture whichever is more [ warranty period: 12 months after the d ate of delivery ]

CTN :40123188

15 May, 2025 NA

Durgapur - West Bengal

Tender For mig/mag welding filler wire to irs-m-46-2020 solid, class-vi wire size-1.2mm grade er 308l as per specification :aws a5.9/5.9m:2017 net weight per spool not more than 12.50 kgs. note: the firm m ust submit the test certificate along with the material supply. ss wire spool for mig welding machine 308l 1.2 mm. compatible for champ multi 400. [ warranty period: 30 months after the date of delivery ]

CTN :40100141

01 May, 2025 4.75 Lacs

Kushtagi - Karnataka

Tender For construction of a hot meal kitchen at sahi primary school in kalamalli village - killadd white lead paint, gasket, cement, sand for making good the wall and floor at 2 on material, killlicenced plumber with tools, killlead or pvc connection pipe 32mm dia (for wash basin), killc.i. / m.s. brackets for flushing cistern, killbrass stop cock, killcp brass waste 32 mm of standard pattern, killcp brass chain with plug, killcopper plated brass piller tap 15mm, killwhite vitreous china clay flat back wash basin size 630x450mm, killgranite sink 23cm thick, killvitrified tiles 600x600 mm, killwhite cement, killceramic tiles 30 x 30 cms, killlime, killadd brush, putty, sand paper at 5 on cost of paint, killliquid wood filler, killprimer, killadd brush, putty, sand paper, roller at 1 on cost of paint, killwater proofing cement paint, killadd brush, putty, glue at 5 on cost of paint, killwhitening, killdry distemper, killadd hom of welding and grinding machine 2 on material, killfabricator, kill5.50 mm thick plain glass, killchrominum plated screws, killcleat angles, killalluminium handles - 15 mm, killalluminium tower bolt - 20 cm, killpvc beading, killrubber beading for shutters beading, killnylon rollers, killpowder coated 60-70 micron, killmason class i (with tools), killadd brush at 1 on cost of paint, killenamel metal paint, killadd providing and removing scaffolding at 3 on labour, killpainter class i, killadd wire brush, fine steel wool, putty, sand paper, at 3 on cost of paint, killready mix primer paint (ready mix red lead paint), killadd hom of welding and grinding machine 4 on material, killwelder grade i, killfitter class i, killms flat, killm.s rods, killmathi/nandi wood scantling, killhom of machinaries for planing, killadd cutting and other wastage 5, killmathi/nandi wood planks for panels 25 mm thick, killadd handling , loading and unloading at 1 on material, killburnt bricks class 35 (non modular), killadd watering charges at 1 on labour, killadd sundries charges at 1 on labour, killmixer (concrete small used in culvert), killbond stone 20 x 20 x 45 cm, killrubble stones, killbinding wire, killtmt bars fe 500, killcasurina poles 75 - 100 mm dia, killadd sundries charges at 2 on material, killadd handling , loading and unloading at 2on material, killcasurina poles 100 - 150 mm, killsilver oak or equivalent planks 38 mm thick, killjungle wood runners and planks, killhom of vibrator 0.71 days, killplasticizer / super plasticizer, killadd watering charges at 1 on material, killmixer (concrete) - 1 cum capacity, killportland cement, killcoarse sand (zone iii), killbroken stone aggregate 12 mm to 10 mm size, killbroken stone aggregate 20 mm size, killbroken stone aggregate 40 mm size, killover head & other miscellaneous charges, killadd sundries charges at 1 on material

CTN :40100190

01 May, 2025 4.75 Lacs

Kushtagi - Karnataka

Tender For construction of a hot meal kitchen at govt primary school in narinala village - killadd white lead paint, gasket, cement, sand for making good the wall and floor at 2 on material, killlicenced plumber with tools, killlead or pvc connection pipe 32mm dia (for wash basin), killc.i. / m.s. brackets for flushing cistern, killbrass stop cock, killcp brass waste 32 mm of standard pattern, killcp brass chain with plug, killcopper plated brass piller tap 15mm, killwhite vitreous china clay flat back wash basin size 630x450mm, killgranite sink 23cm thick, killvitrified tiles 600x600 mm, killwhite cement, killceramic tiles 30 x 30 cms, killlime, killadd brush, putty, sand paper at 5 on cost of paint, killliquid wood filler, killprimer, killadd brush, putty, sand paper, roller at 1 on cost of paint, killwater proofing cement paint, killadd brush, putty, glue at 5 on cost of paint, killwhitening, killdry distemper, killadd hom of welding and grinding machine 2 on material, killfabricator, kill5.50 mm thick plain glass, killchrominum plated screws, killcleat angles, killalluminium handles - 15 mm, killalluminium tower bolt - 20 cm, killpvc beading, killrubber beading for shutters beading, killnylon rollers, killpowder coated 60-70 micron, killmason class i (with tools), killadd brush at 1 on cost of paint, killenamel metal paint, killadd providing and removing scaffolding at 3 on labour, killpainter class i, killadd wire brush, fine steel wool, putty, sand paper, at 3 on cost of paint, killready mix primer paint (ready mix red lead paint), killadd hom of welding and grinding machine 4 on material, killwelder grade i, killfitter class i, killms flat, killm.s rods, killmathi/nandi wood scantling, killhom of machinaries for planing, killadd cutting and other wastage 5, killmathi/nandi wood planks for panels 25 mm thick, killadd handling , loading and unloading at 1 on material, killburnt bricks class 35 (non modular), killadd watering charges at 1 on labour, killadd sundries charges at 1 on labour, killmixer (concrete small used in culvert), killbond stone 20 x 20 x 45 cm, killrubble stones, killbinding wire, killtmt bars fe 500, killcasurina poles 75 - 100 mm dia, killadd sundries charges at 2 on material, killadd handling , loading and unloading at 2on material, killcasurina poles 100 - 150 mm, killsilver oak or equivalent planks 38 mm thick, killjungle wood runners and planks, killhom of vibrator 0.71 days, killplasticizer / super plasticizer, killadd watering charges at 1 on material, killmixer (concrete) - 1 cum capacity, killportland cement, killcoarse sand (zone iii), killbroken stone aggregate 12 mm to 10 mm size, killbroken stone aggregate 20 mm size, killbroken stone aggregate 40 mm size, killover head & other miscellaneous charges, killadd sundries charges at 1 on material

CTN :40106715

15 May, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of solid (mig/mag) welding filler wire with shield gas, size - 0.8 mm., class -i to rdso specifi cation irs m: 46/2020 with grade as per is: 6419/2004, the maximum weight of the wire spool should be 12.5 kg. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40106747

12 May, 2025 NA

Hubli - Karnataka

Tender For supply of solid mig-mag welding filler wire of dia 1.2 mm class i as per spec. no. irs: m-46/20 , grade s3c503 as per is:6419-2004 of approx 12.5 kgs each spool weight. from approved sources only. to be supplied along with manufacturers test certificate . [ warranty period: 30 months after the date of de livery ]

Central Government/Public Sector

CTN :40093761

15 May, 2025 NA

Multi City - Multi State

Tender For supply of solid mig/mag welding filler wire, class vi size 1.2 mm (spec.no.irs m-46/2020) gra de er 308 l as per aws: a 5.9/5.9m: 2017 in spool of 12.5 kgs/roll. [ warranty period: 9 months aft er the date of delivery ]

Soldering Stick Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector