Latest solenoid valve spares Tenders | Government solenoid valve spares Tenders

Central Government/Public Sector

CTN :45343209

04 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap unserviceable over head steel water tank at near ng vs station unit-1 location-near ng vs railway station and unit-1 location at back side of ohe depot vishwamitri. total [ units-2] qty 23.681 mt. consist of ms scrap i.e. ms plate, off size rails (ng,bg) angle flat bar, i-section, tie- bar, cross brassing, round bar nut bolt ¿, gi pipe 3¿¿. reclaimed items (1) sluce valve-1 (2) pvc tank-1. delivery by actual weight only and on as is where is basis. custodian: sse works prtn. fdp 50 days. the lot details are as per jvr and measurement sheet only. cutting allowed for easy loading.

Central Government/Public Sector

CTN :45341832

04 Jun, 2026 NA

Barh - Bihar

Tender For procurement of hrh hydraulic safety relief valve of st i boiler, barh super thermal power station

corporations/Associations/Others

CTN :45301373

10 Jun, 2026 15.56 Lacs

Kolkata - West Bengal

Tender For supply,delivery with fitting fixing of three numbers 500mm dia sluice valve at taratala valve station with other allied works.

corporations/Associations/Others

CTN :45099247

01 Jun, 2026 31.60 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of globe valve 1-c2500-sv-sw-ho-f22 , globe valve 1.5- c2500-sv-sw-ho-a105 , globe valve 2.5-c2500-glv-bw- ho-wcc , globe valve 2 inch, 40mm nb c2500, body material- f22 , gate valve h.o. c2500 nb100 material-f22 gate valve, size- 100mm , globe valve dia 15 mm c2500 shwf22 , bolted bonnet valve 25 mm c1500 , aux. steam station valve 80mm c1500

Central Government And Public Sector

CTN :45318739

16 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of fluid level gauge fsa-0076 , fluid level gauge fsa-0254 , ball valve khb-25npt-3382 , seal for ball valve khb-25npt- 3382 , manifold block hydac part no. rm67429 , manifold block hydac part no. rm67473 , manifold block hydac part no. rm67461 , manifold block hydac part no. rm67435 , manifold block hydac part no. rm67441 , manifold block hydac part no. rm67442 , manifold block hydac part no. rm67443 , high pressure filter hydac part no. 1250495 , return line filter hydac part no. 1263017 , ball valve hydac part no. 3962308 , seal for ball valve hydac part no. 3393358 , ball valve khb-20npt-3382 , seal for ball valve khb-20npt-3382 , ball valve khm-40npt-3382 , seal for ball valve khm-40npt-3382 , heat exchanger gasket set 2kw , heat exchanger gasket set 4kw , heat exchanger gasket set 20kw , inspection cover rd475 , inspection cover rd250 , coupling assembly hydac part no. rm62874 , coupling assembly hydac part no. rm16234 , coupling assembly hydac part no. sp750084 , spider hydac part no. rm13425 , spider hydac part no. rm16335 , spider hydac part no. sp750090 , check valve hydac part no. 707521 , dir. control solenoid operated valve , pressure relief valve hydac part no. 6074635 , single station manifold block , connector plate , grub screw , ball valve khm-42lr-3385 , seal for ball valve khm-42lr-3385 , seal kit for pump hydac part no. 4014495 , seal kit for pump hydac part no. 4014489 , seal kit for pump hydac part no. 4566427 , gasket for inspection cover rd475 , gasket for inspection cover rd250 , mounting o-ring for adapter block , mounting o-ring for connector plate , mounting o- ring for pressure relief valve ) /bid number : gem/2026/b/7471539 * /dated: 25-05-2026 & & / bid document 1 / 46

Central Government And Public Sector

CTN :43012931

30 Jun, 2026 NA

Thane - Maharashtra

Tender For corrigendum : supply of procurement of spares and service part of 10 yearly overhauling of generator circuit breaker c c -contact aux ch part no hbl956327001 , kit c m chambre auxiliaire avec clapets part no hbl956327102 , seals for station contactandauto bl valve part no hbl956328001 , parts for station contactandauto bl valve part no hbl956328101 , seals for insertion resistor part no hbl955518001 , seals for locking valve part no hbl956333001 , seals for ctl valve openingandclosing part no hbl957148001 , kit pieces valve de commande ch auxil part no hbl957148102 , seals for enclosure part no hbl957422003 , seals for check valve part no hbl955939001 , seals for venting valve of muffler part no hbl955814001 , seals for inspection port hole part no hbl956021001 , seals for pneumatic ctl cubicle part no hbl957504001 , valve part no hbl271408003 , parts for ctl pneumatic relay and its receive part no hbl956430101 , seals for pneumatic block part no hbl955777002 , parts for pneumatic ctl block part no hbl955777101 , seals for standard electrovalve part no hbl955778001 , parts for standard electrovalve part no hbl955778101 , switch part no hbl 02555811 , switch part no hbl 02555809 , filter part no hbl956872001 , o ring part no hbl 02445261 , o ring part no hbl 02445267 , valve part no hbl272595001 , set of valve diam 18 for pneum block part no hbln55042701 , parts for auto bleeding valve part no hbl957798101 , seals for close checking sw and ctl device part no hbl955697001 , complementary consumable kit part no hbkitpdr 1 grease si33 part no hbl 01835217 qty 2 nos , 2 vaseline grease 80 gr part no hbl 01835106 qty 10 nos , lock washer kit , set of springs , set of springs for order valves , additional spares part , seals for auto bleeding cabinet part no hbln55132401 , set of seals automatic bleeding part no hbl957798002 , servicing of 10 yearly overhauling of gcb type pkg2v scope of job attached servicing to be completed within 30 days after start of job

CTN :45318942

15 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of 2400 lph capacity transformer oil filtering machine , spares - supply of non hygroscopic cartridge filter , spares - press filter , spares - vacuum pump oil , spares - electromagnetic type solenoid valve , spares - o ring seals for pipeline , spares rotary oil sealed vacuum pump , spares mechanical booster pump

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

Central Government/Public Sector

CTN :45292299

06 Jun, 2026 NA

Khorda - Odisha

Tender For tender for supply of fire hydrant system at uco zo bbs - monoblock pump , with motor 5.5 kw , accessories , base plate , capacity 900 lpm , discharge head 40 to 45m , control panel with local push button , supplying , installing , testing and commissioning approved make remote paging station for zone selection , supplying , installing , testing and commissioning of class c ms pipes 100mm nominal dia , supplying , installing , testing and commissioning of class c ms pipes 80mm nominal dia , supply , installation , testing & commissioning of ci butterfly valves , supply , installation , testing & commissioning of ci gate valve , supplying , installing , testing and commissioning of c.i. non-return valves , supply , installation , testing & commissioning of fire brigade inlet connection of 3 way , m.s. hose cabinet stand mounted type fabricated out of m.s. sheet , single headed hydrant valve , 2 lengths of 15 m long , 63mm dia rrl hose , 1no. stainless steel short branch pipe of 63 mm dia. with nozzle. , hose reel drum of swinging type with 19mm dia rubber braided hose of 36 m , fire exit signage at each entry of staircase on every floor , floor identification signage at each stair enclosure on every floor , camc for 4 years after expiry of one year warranty of fire fighting system

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

Solenoid Valve Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors