Latest solid gear wheel Tenders | Government solid gear wheel Tenders

CTN :45188766

28 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - condemned civil structure of abandoned service building 1] railway institute , unit-1, 2] atp school , unit-1, 3] running room , unit-1, total - 3 units, total qty- 01 by lot. free delivery period [fdp] for this lot has been fixed as 80 [eighty] days. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.

Corporations/Associations/Others

CTN :45259470

02 Jun, 2026 10.1 Thousand

Channarayapatna - Karnataka

Tender For annual supply of safety gears and safety equipments for sanitation work of tmc channarayapatna - coconut brooom, dettol soap, google weed cuttiing, focklined hand gloves, hand glovees, mullu guddalii, blade katthi cotton, pikasii, guddli, haaree, fiber basket, konkaani, raincooat, heaad cap, reflective jacket16, maccchu, kaireepu, aproon, ladies shooes, kuduugolu, long handle brooom, gumboootts

Central Government/Public Sector

CTN :45193685

09 Jun, 2026 NA

Kota - Rajasthan

Tender For balance work of construction of relay, battery and ips room in connection with ei/repl indoor signaling gears on age cum condition basis for ensuring safety of trains at idg station.

CTN :45252333

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

CTN :45188298

29 May, 2026 12.07 Lacs

Udupi - Karnataka

Tender For tenders for the supply of safety gears to powrakarmikas of udupi city municipal council as per technical specification mentioned in tender documents.

CTN :45203882

20 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of safety gears gum boot for workes in a ward

CTN :45208474

20 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of safety gears for workers in a ward

Central Government / Public Sector

CTN :45218656

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 015a pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , bcn m1, boxnha m1, boxn m1, boxnr , wagons available on rails.1) ser bcn m1 30079161197, 2) scr boxnha m1 10099618956 ,3) scr boxn m1 10099636721,4) er bcn m1 30029160386 ,5) ser boxnr 25079628948. location road no. 2 at dump yard.rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower.19, bcn swing,20. bcn flap,21. distributor valve, 22. cp pb with control reservoir, 23. cut of angle cockds8 no : 0999603015. dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 50.408(m.s 46.076, ss-4.332)mt .sold on number basis only delivery in cutoff parts.note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government And Public Sector

CTN :45167110

02 Jun, 2026 NA

Bangalore - Karnataka

Tender For wire rope hoist of 2t capacity confirming to is-807,3938 with hoist carrier for ct movement to suit 150 mm rail width as per the following specification. equipment : electric wire rope hoist; capacity : 2000 kgs ; duty & class : class iv heavy duty; height of lift : 5.0 mtrs; rail size : 150 mm width, 450 mm height ; hoist head room : 900 mm ; hoist speed : 3 mpm; ct speed : 12 mpm; hoist motor : squirrel cage induction motor 5 hp with brake , tefc sq. cage induction motor 3.7kw / 5hp , 4 pole , class f insulation , 415v , 3 ph , flange mounted , frame size 112m with dc operated electromagnetic brake of minimum braking capacity of 5 kgm, continously rated; ct motor and brake specifications :squirrel cage induction motor power : 0.37 kw , pole : 4, efficiency : ie3 , frame : 71m , mounting : b5 flange , brake : electromagnetic disc type spring loaded ac fail safe brake of min torque : 0.6kg.m; voltage : 415v , phase : 3 phase , compressed spring length : 40 mm , air gap : 0.5 mm; hoist & ct gearbox : helical / spur gear combination. all gears inside the gearbox shall be of en-24 material with hardness of 40-45 hrc. mtc and htc from nabl accredited lab should accompany the supply. wire rope : round strand steel wire rope conforming to is 2266 latest and is 6594 latest size : 10mm or 12mm , 4/1 falls construction : 6 x 36 . drum : seamless pipe of suitable dia & shell thickness to accommodate wire rope single layer as per is-2062; hook : forged heavy duty single shank typeplain hook as per is-3815, 360 swivel type with spring loaded safety latch. control panel :consists of mcb, olar, fuse, etc. note: (a) test certificate for hook shall accompany the supply (b) make of bearings: skf/ntn/fag/timken only. (c)the firm shall furnish inspection certificate from manufacturers or their authorised testing agents preferably incorporating the details of traceability of the bearing. (d) all gears inside the gearbox shall be of en-24 material with hardness of 40-45 hrc. mtc and htc from nabl accredited lab should accompany the supply (e) make of motors: ngef / abb / lhp / cg / hem /bharat bijlee only; (f) make of electricals: siemens/ge/alstom/l & t/abb only ;control voltage: 110v ;supply voltage: 400/440v, 3 phase 50 cycles. (g) guarantee: 12 months from the date of commissioning or 18 months from the date of supply, whichever is earlier. [ warranty period: 18 months after the date of delivery ]

Central Government / Public Sector

CTN :45173061

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 012 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxn m1. bcn m1 , bobrn m1, boxnr m2 ,wagons available on rails. 1) ser boxn m1 10079666076, 2) nr bcn m1 30039016307, 3) er bobrn m1 72029661173, 4) ser bcn m1 30079060933 , 5) scr boxnr m2 25099660287 . location road no. 2 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.center pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower.19, bcn swing,20. bcn flap,21.bronze bushes, ds8 no : 0999603012 dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 51.642 (m.s 46.640, ss-5.002) mt .sold on number basis only.05nos . delivery in cutoff parts. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Solid Gear Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government / Public Sector