Get complete information related to latest Sound Enclosure Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sound Enclosure Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sound Enclosure Tenders.
Tender For rate contract for supply of handpump set and spare parts - supply of handpump set and spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting rod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll), front cover, handle for deepwell hand pump (is: 15500 part 4), stand assembly telescopic for deepwell hand pump, ring spanner 17*18, crank spanner 17*18, i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete
Tender For supply of galvanized mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw) /hot finished welded (hfw) confirming to is 1239 (part1/2004 screwed at both ends as peris:554/1999 socketed at one end other end protected with plastic thread protector .the socket confirming to is :1239 (part ii)/2011 in ra ndom length of 4 to 7 mtrs. g.i. pipe shall be duly isi marked as per statutory requirement nominal bore 25 mm medium grade. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For corrigendum : supply of galvanised mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw)/hot finished welded (hfw) conforming to is.1239 (part 1) /1990 (fifth rev) with amdt. no. 1 to 5. screwed at both ends as per is.554/1985 socketed at one end and other end protected with plastic thread protector.the socket conforming to is.1239(part-ii)/1992 (fourth rev) with amdt no.1 in random length of 4 to 7 mtrs. g.i pipe shall be duly isi marked as per statutory requirement nominal bore dia is 40mm medium grade. is 1239-68 part i [ warranty period: 30 months after the date of delivery ]
Tender For supply of galvanised mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw)/hot finished welded (hfw) conforming to is.1239 (part 1) /1990 (fifth rev) with amdt. no. 1 to 5. screwed at both ends as per is.554/1985 socketed at one end and other end protected with plastic thread protector.the socket conforming to is.1239(part-ii)/1992 (fourth rev) with amdt no.1 in random length of 4 to 7 mtrs. g.i pipe shall be duly isi marked as per statutory requirement nominal bore dia is 40mm medium grade. is 1239-68 part i [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of various precision measuring instruments for tmd at sikka tps. - insize-1118-150b digital vernier calipers, digital vernier calipers size - 0-300 mm mitutoyo make, vernier caliper "mitutoyo" make, size- 0- 300 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 180 mm, vernier caliper "mitutoyo" make, model 532-101 size- 0- 280 mm, vernier dial 0.00 to 200 mm, dial vernier caliper: size: 300mm (l.c: 0.02mm/0.001) suitable to take inside, outside, depth and step precision measurements. dual reading scale (metric and inch). mfg. from hardened ss and satin finish., dial gauge: 0-5mm model no: 1044a, dial indicator plunger type with back lug suitable for magnetic base, height gauge etc. graduation: 0.01 mm, range: 0 mm - 5 mm, dial reading: 0-100, accuracy: 0.013 mm., extension rod, length 150 mm suitable for mitutoyo make dial indicator plunger, mitutoyo dial indicator 0.01mm to 10mm, dial gauge: 0-30 mm model no: 3052a-19, mitutoyo make dial gauge with magnetic stand: 0-10mm, magnetic stand order 70115, mitutoyo make magnetic stand,701, magnetic stand with flexible column, model:7012-10, magnetic stand model 7033 - 10, make mitutoyo, long stem 1 for mitutoyo make magnetic stand 7010, dia 12 mm bottom connector m8x1.25 length 300 mm, long stem 2for mitutoyo make magnetic stand 7010, dia 10 mm length 500 mm, insize telescopic inspection mirror size 32 mm, 360d rotation 500 mm long, adjustable ss handle, feeler guage 0.03 to 0.5mm (184-302s), make; - mitutoyo, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, feeler gauge: 0.01 - 1 mm, length - 300 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., feeler gauge: 0.01 - 1 mm, length - 600 mm (long leaf). 32 leaves: 0.01 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm., measure tape 3 mtr long, measure tape 5 meter, measure tape 30 meter, freemans make measure tape 15 metre long, digital outside micrometer with large digital display. size: 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size: 25 - 50mm, resolution: 0.0001 mm., mitutoyo make outside micrometer, 0 to 25 mm, 102/217, outside micrometer size - 50-75 mm mitutoya make, outside micrometer size 75-100 mm, outside micrometer 0-150 model 104-135a, mitutoyo make insidemicrometer, range-25 to 50mm, model:141-105, inside micrometer range 50-500 mm lc-0.01mm, mitutoyo make depth micrometer, 00 to 150 mm, 129/116, mitutoyo make depth gauge, range 300 mm,530/119, bore guage 18-35 mm (511 - 701) make: - mitutoyo., bore guage 35-60 mm (511 - 701) make: - mitutoyo., digital bevel protector 150 mm (187-501), make: - mitutoyo, mitutoyo make thread pitch gauge up to 100mm, surface plate, granite as per is 8512-2:1990 size 600x600 mm with stand 755 mm
Tender For supply of 15 mm galv. steel tubes medium grade is: 1239 part-i/2004 both ends screwed one end with socket and other end with plastic thread protector, randum length of 4 to 7 m continuously welded electric resistant weld(erw), high frequency induction welded(hfiw), hot finished welded (hfw) light coated isi mark and socket also to be isi marked confirming to is: 1239 (part-ii)/2011. [ warranty period: 30 months after the date of delivery ]
Tender For supply of duly isi marked galvanised mild steel tubes electrical resistance welded (erw)/high frequency induction welded (hfiw) / hot finished welded (hfw) confirming to is:1239 (part-i)/1990 (fifth revision) with amdt. no.1 to 5. screwed at both ends as per is:554/1985. socketed at one end and other end protected with plastic thread protector. the socket confirming to is:1239 (part-ii) / 1992 (fourth revision) with amdt. no. 1 in random length of 4 to 7 mtrs. socket screwed pipes. nominal bore dia 32 mm. quality medium class. [ warranty period: 30 months after the date of delivery ]