Latest sound insulation Tenders | Government sound insulation Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

State Government

CTN :45118976

03 Jun, 2026 9.18 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of supply of stone pad , supply of ms angle iron , supply of top channel , supply of clamp , supply of e-bracket , supply of al pg clamp , supply of number plates , supply of danger board , supply of barbed wire g.i. , supply of bolts and nuts , supply of aluminium binding wire , supply of earthing complete , supply of 11 kv v type cross arm , supply of 11 kv bracket , supply of ms t off channel , supply of aluminium jointing sleave , supply of aluminium paint , supply of redoxide paint , supply of guarding angle , supply of guarding angle clamp , supply of irag bolt , safe carriage of stp pole 13 mtr , safe carriage of stp pole 11 metre , safe carriage of pcc pole 8.5 metre , safe carriage of a.c.s.r. weasel conductor , safe carriage of disc insulator , safe carriage of disc fitting , safe carriage of pin insulator , safe carriage of pin with nut , safe carriage of stay set complete , safe carriage of v type steel cross arm , safe carriage of g.i. wire , erection of st pole 11 mtr , erection of st pole 13 mtr , erection of pcc pole , erection of paint of pole , erection of danger board , erection of m.s. angle iron , erection of acsr weasel conductor , erection of barbed wire , erection of aluminium binding wire , erection of ms t off channel , erection of top channel , erection of number plate , erection of stay set complete , erection of g.i. wire 8 swg , erection of g.i. wire 6 swg , recieved back charges for carraige of dismantling material from site to store.

CTN :45346341

11 Jun, 2026 11.54 Lacs

Raebareli - Uttar Pradesh

Tender For supply of stay clamp , st. clamp , insulator , earth wire , holding clamp , 11 kv f clamp , lt shackle , nut and bolt , lt clamp

CTN :45327983

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For 06/2026-27/ - deposit work(running work) in sub division masauli under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45327984

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For deposit work(running work) in sub division ramnagar under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

Central Government/Public Sector

CTN :45289241

29 May, 2026 NA

Salem - Tamil Nadu

Tender For auction sale of others - condemned and unserviceable cl.iii released porcelain insulator of sorts and sizes with or without brocken consisting of porcelain stay insulator- 90 nos, prcelain bracket insulator- 95 nos, porcelain 9 tonne insulator- 100 nos on as is where is basis. total weight- 4210 kg [ gi- 1490 kg, porcelain- 2720 kg]. s.1539 no. 624002 dated 30.04.2026.

State Government

CTN :44997863

28 May, 2026 20.00 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage of pcc and stp poles 8.5, 11 and 13 mtr , carriage of line material , erection of pcc and stp poles 8.5, 11 and 13 mtr , erection of double poles 8.5, 11 and 13 mtr , installation and fixing of 11 kv tpmo. , erection and grouting of stay set , providing and fixing of insulator , laying of acsr weasal, rabbit and dog conductor. , erection of abc conductor , grouting of pcc and stp poles , making of plinth , fixing of earthing rod , chopping of tree branches , providing and fixing of clamps of lt , providing and fixing , carriage and installation of 25 kva transformer , carriage and installation of 63 kva transformer , carriage and installation of 100 kva transformer , carriage and installation of 400 kva transformer , dismantling of old pcc and stp poles , dismantling and removal of conductor , erection of section tee pole , carriage and installation of lt dist box , provding and fixing, filling cable joints , safe carriage of cables , laying of under ground cable , laying of overhead cable , guarding of 11 kv line by gi wire , safe carriage and installation of metering unit , safe carriage and installation of metering cubicle , provding and fixing wearing gi pipe

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

Central Government/Public Sector

CTN :45282414

27 May, 2026 NA

Chennai - Tamil Nadu

Tender For 1) supply and installation of 53 mm thick thermal cum sound insulation in roof and side wall of drivers cab area (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec-413 and as per drawing train18/mc/ac(727)-9-0-005,item-4, alt-f -13 sq.mts 2)supply and installation of 28 mm thick thermal cum sound insulation in flooring of drivers cab area (nose cone area) only in ts/dtc coaches as per spec.icf/md/spec-413 and as per drawing train18/mc/ac(727)-9-0-005,item-5, alt-f -10 sq.mts 3) non-flammablesolvent based adhesive for pasting insulation material to stainless steel and spec. icf/md/spec-093,issue status-01,rev-00,dated: 27.06.1998 with amendment no.1&2 and as per drawing train18/mc/ac (727)-9-0-005,item-6,alt-f - 6 kg (approx). 4) aluminium foil pressure sensitive self adhesive tape size 0.12mm x 30mm x20 mtrs long. with spec.scotch-mount nr 0.425(zb.fa.3m) and as per pp- 57131, dt:03.06.1994 and as per drawing train18/mc ac(727)-9-0-005,item-7,alt-f - 1 no. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45028919

25 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of line materials under electric supply area medininagar - electrical items :, hot dip galvanized from fabricated iron materials - 33 kv v cross arm (100x50x6) 19.7 kg (galvanized) for rail , 33 kv pole top bracket (100x50x6) 2.9 kg for rail (galvanized), , back clamp for 33kv v cross arm for rail 3.2kg, , 33kv dp channel (100x50x6mm) 45.5kg, , support clamp for 33 kv dp channel for rail 1sets=4pairs 9kg, , 33 kv v cross arm (100x50x6) 19.7 kg (galvanized) for psc pole 400 kg. 19.2kg, , 33 kv pole top bracket (100x50x6) 2.9 kg for 400kg.psc pole (galvanized), , 33kv tapping channel (100x50x6) mm 23 kg, , back clamp for 33kv cross arm for psc pole 400kg.3 kg, , 33kv dp channel (100x50x6) mm 45.5 kg, , support clamp for 33 kv dp channel psc pole 400kg. 1sets=2pairs 6kg, , side stay clamp 400 kg psc pole (galvanized) 1.92kg, , angle stay clamp 400 kg psc pole (50x8) 1.92 kg (galvanized), , 33 kv cross bracing for dp structure (50x50x6) 64.3 kg 1 set=4 pc, , clamp for cross bracing suitable for rail/psc pole 400 kg 1 set 4 pc 3.6 kg, , 11kv v cross arm (100x50x6) 14.6 kg (galvanized) for psc pole 200 kg., , 11 kv pole top bracket (100x50x6) 2.1 kg for 200kg.psc pole (galvanized), , back clamp for 11kv cross arm for psc pole 200kg. 2.8kg, , 11kv dp channel 75x40x6mm 41.3 kg, , support clamp for 11 kv dp channel psc pole 200kg. 1sets 2pairs 4.4 kg, , 11kv tapping channel 75x40x6mm 21 kg, , side stay clamp 200 kg psc pole (galvanized) 1.08kg, , angle stay clamp 200 kg psc pole (50x8) 1.08 kg (galvanized), , 11 kv cross bracing for dp structure (50x50x6) 64.3 kg 1 set=4 pc, , clamp for cross bracing suitable for rail/psc pole 400 kg 1 set 4 pc 3.6 kg, , transformer base channel for dss 1set=2pc 52.63kg, , top channel for dss (100x50x6mm) 52.63kg 1set=2pc, , channel for hg fuse set 1set=-2pc 38.6 kg, , channel for ab switch (100x50x6mm) 52.63 kg 1set=2pc, , support clamp for dss 1set=2pair for 11 kv top, , channel/ab switch base channel/tr base channel & hg fuse set channel 9.6 kg, , transformer belting (50x50x6 mm) & belting support (40x40x6 mm) [galvanized] (52.3 kgs.), , lt distribution bus bar (35x35x6mm) 1set=2pair, , 33kv ab switch structure (549 kg)/set, , 11kv ab switch structure (549 kg)/ set, , 33kv post insulator structure (55 kg/)/set, , 11kv post insulator structure (55 kg)/ set

Sound Insulation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government