Get complete information related to latest Sound Meter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Sound Meter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Sound Meter Tenders.
Tender For rate contract for supply of handpump set and spare parts - supply of handpump set and spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting rod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll), front cover, handle for deepwell hand pump (is: 15500 part 4), stand assembly telescopic for deepwell hand pump, ring spanner 17*18, crank spanner 17*18, i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete
Tender For supply of 3 pol mcb , 3 core armed aluminium cable , slim dc power supply variable up to 30v 5a , l-2 switch , crimping tool kit set of 6 items , laser distance meter , clamp meter , multifunctional network tester , non-contact voltage tester , professional heat gun , 6a 16a 240v ac 3 pin nickel plated brass adaptor , insulation tape roll , lane tester , clumping tools , electric tester , ofc joint coupoler box , odc dc fan , patch card for odc lc to lc , metal juncation box for fix camera , body cover of radio set tk 2317 , armoured power cable coper 2 core , lt wire 8 10 mm for series connector for bty copper based , fiber clener solution liquid , joint closure 24 core , extension board 10 amp output 250 v with 2 mtr extension cord surge protector , whip antenna of radioset tk 2317 , bty lead of kw tk7360 , power cable 2 core copper 4 mm , co-xial cable 52 ohm rg 58 , 12 v 2 amp. dc adapter , mcb box enclosure as per site requirement , 3 core 6 sqmm copper flexible cable , installation and commissioning at mandav and pithampur ) /bid number : gem/2026/b/7594394 * /dated: 27-05-2026 & & / bid document 1 / 28
Tender For supply of miscellaneous electric items- steel tubular 9 meter long pole (st-410 sp3, steel tubular 8 meter long pole (st-410 sp1:, 16 kn polymer shackle insulator, 1.1 kv (low tension), go set 11 kv hd, ab switch 3 phase, 3-pole 200 amp, vertical; type with rod heavy duty, 11 kv horn gap fuse set (hg set) 3-phase 4 amp polymer type heavy duty, galvanized nuts and bolts full thread with was 4" & 6" heavy duty, anti climbing device with clamps, galvanized stay set with 50*8 mm stay clamp guy insulator (02 no.), anchor plate (200*6mm nuts-bolts, 2 nos turn buckets, 1.8m long, 16 m diameter solid gs stay rod & 7/15 mm dia gi standard wire complete., guy/stay wire 7/14, galvanized steel, typicall hot-dip zinc-coated for corrosion resistance, guy insulator, led street lights 70/72 watt, pressure die ca aluminum housing only, system lumen output 120lm/w, cct: 5700-6500°k, cri≥ 80, thd≤1 surge 4kv, pf >= 0.95 ip66, warranty minimum -years, pvc cable 3 core 2.5 sqmm, mukki clamps, rabbit conductor acsr 50 sq.mm, gi u-clamp for shackle insulator with pin / nu, lt line spacers, high quality rigid pvc (poly vinyl chloride) or polypropylene, with uv stabilization for weather resistance
Tender For corrigendum : tender for supply of motor samagri - technical specification 2hp item set v4 (single phase) 20 hp 16 stage item set v6 (three phase) 05 hp item (three phase) - texmo 50 hp 08 stage vertical open well pump set v8 01 hp open well pump (single phase) 02 hp open well panel (single phase) 20 hp automatic star delta item (three phase) 15 hp panel item (three phase) digital meter cut out fuse 200 amp cut out fuse 63 amp 06 mm cc 03 core (three phase) 08 mm ac 02 core (single phase) 12 mma w (90 metre) bundle breaker machine 21 kg ld-joint class-15-isi 90 mm ld-joint class-15-isi 110 mm cld-joint class-15-isi 150 mm ld-joint class-15-isi 200 mm hdpe c.1.d. joint 90 mm. hdpe c.1.d. joint 110mm hdpe c.i.d. joint 125mm hdpe c.i.d. joint 140mm hdpe c.i.d. joint 160mm hdpe c.i.d. joint 180mm hdpe c.i.d. joint 200 mm clamp set with nut bolt - 4 inch clamp set with nut bolt-6 inch clamp set with nut bolt - 8 inch pvc coupler isi in 6kg-90 mm pvc coupler isi in 6kg-110 mm pvc coupler isi in 6kg-140mm pvc coupler isi in 6kg-160mm pvc coupler isi in 6kg-180mm pvc coupler isi in 6kg-200mm aplon (teflon tape)
Tender For supply of i year physics, chemistry lab items dept use - digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meter range 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., heating mantlecapacity: 500ml rating 200w with energy regulator, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, hotplateplate size:25 x 30 cm (10 x 12 inch) with adjustable thermostate controlup to 350 degree temprature controlheating element: nichrome heating elementpower supply: 220 240 v ac, 50 hz, electric bunsen burnermaximum temperature up to 800 degree c, power supply 220 to 240 v, power 350 w, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyles law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale.quill tube specifications:length: approximately 50 cm.bore diameter: uniform bore, roughly 1 mm to 2 mm.construction: glass tube with one end sealed.trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests.springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long.measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale.accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.
Tender For supply of physics lab equipments - purchase of lab equipments, wheatstone bridge kit specifications:series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., boyles law apparatus specifications:the apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale.
Tender For supply of isi marked 5 star rated 1.5 hp, 1.1 kw single phase submersible pump set, having discharge capacity 0.66 lps, discharge head 70 meter, for bore size 100mm, delivery size 32 mm, no of stages 15, speed 2770 rpm, control panel with starter having isi marked mcb, ammeter, voltmeter, single phase preventer & water level indicator.pump set should include non return valve ,erection clamp & other accessories, isi marked submersible flat cable 3 core flat with copper conductor to is: 694-3m. make of pump set should be crompton, ksb, kirloskar,penguin or shakti. conformity to is : 8034 latest ( indian standard of submersible pump set ) & is: 9283 latest ( indian standard of wet type for continuous rating synchronous motor). [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of water supply items to h malligere grama panchayath - hmm_ motor rewinding labour and workshop turning fitting charges , hmm_ motor lifing erection and service fitting , hmm_ hand pump lifting erection and service, hmm_ starter board wiring electrical service and fitting , hmm_ over tank gatevalve gm rod lathe threading charge and service, hmm_ 5 inch fta, hmm_ 6 inch fta, hmm_ 5 inch mta, hmm_ 6 inch mta, hmm_ 5 inch pvc tee , hmm_ 6 inch pvc tee , hmm_ 6 inch plain end, hmm_ 5 inch pvc pipe bend, hmm_ 6 inch pvc pipe bend, hmm_ 5 inch pvc elbow, hmm_ 6 inch pvc elbow, hmm_ 5 inch pvc pipe, hmm_ 6 inch pvc pipe, hmm_ 5 inch pvc collar, hmm_ 6 inch pvc collar, hmm_ 5 inch repair collar, hmm_ 6 inch repair collar, hmm_ 7.5hp to15hp preventor, hmm_ relay unit-motor, hmm_ 6 inch threaded end cap, hmm_ 2 inch gi pipe, hmm_ amps meter, hmm_ 2 inch bore clamp, hmm_ 2.5 inch bore clamp, hmm_ contactor unit, hmm_ 7 inch cassing pipe, hmm_ dol starter m, hmm_ dol starter ltlk, hmm_ electrical contact kit, hmm_ dol electrical panel board, hmm_ sada electrical panel board, hmm_ 100amps fuse unit, hmm_ 63amps fuse unit, hmm_ 4sqmm 3core copper cable flat type, hmm_ indicator, hmm_ mrf tape, hmm_ no volt coil, hmm_ 10 stage pump, hmm_ 12 stage pump, hmm_ pcv tape roll, hmm_ 7.5hp preventor, hmm_ relay ltlk, hmm_ 1.2 mm rewinding copper wire, hmm_ shalk thrid, hmm_ volt meter, hmm_ 6 hp motor pump with 10 stage, hmm_ 7.5 hp motor pump with 12 stage, hmm_ bolt nut 3by8 inch, hmm_ bolt nut 5by8 inch, hmm_ rotor bush, hmm_ do bush, hmm_ stg bush, hmm_ bucket washer, hmm_ borewell handle, hmm_ borewell head, hmm_ borewell water tank, hmm_ borewell pedestal stand, hmm_ cylinder, hmm_ mcb 4 pole, hmm_ 1.25 inch gi collar long, hmm_ 1.25 inch gi pipe, hmm_ 0.5 inch gi tap, hmm_ 0.75 inch gi tap, hmm_ gm upper valve, hmm_ gm lower valve, hmm_ impellers, hmm_ m-12 boltnuts, hmm_ nrv lather, hmm_ plunger rod 3 meter, hmm_ x nipple, hmm_ 2hp v4 sm motor pump 20stage, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 0.75 inch cpvc ball valve, hmm_ 1 inch cpvc ball valve, hmm_ cpvc gum 29ml, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ 1 inch cpvc union and tank nipple, hmm_ gargen pipe 0.75 inch , hmm_ gargen pipe 1 inch , hmm_ hdpe end connector, hmm_ 1.25 inch hdpe pipe, hmm_ 1.5 inch hdpe pipe, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 3 inch pvc mta & fta & end cap, hmm_ stick & paper, hmm_ solvent cement 100, hmm_ solvent cement 50, hmm_ solvent cement 250, hmm_ thrust bearing & bottom, hmm_ 0.75 inch cpvc elbow & collar, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc pipe, hmm_ 0.5 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 4 inch pvc ball valve, hmm_ 2 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 3 inch pvc joint collar, hmm_ 1 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 4 inch pvc pipe collar, hmm_ 2 inch gi non return valve, hmm_ 2.5 inch gi non return valve, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.5 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 4 inch pvc elbow, hmm_ 0.5 inch pvc pipe, hm