Latest sound monitoring system Tenders | Government sound monitoring system Tenders

CTN :41024886

21 Aug, 2025 NA

Jamnagar - Gujarat

Tender For development of indigenous multiship generic apms trainer - overall hardware and software design, supply of workstation with 27 inch monitor (for trainees), supply of defect simulation tablet (for instructors), touch panel scree size- 55inch (for display of switchboard with touch functionality), development of emulator and apms module, stw and commissioning of the system at ins valsura., integration of all components with proper routing of cables., power supply points to be provided by bidder for modules., ups for entire system with backup time of 30 min to be provided with system., air conditioning unit of 02 ton to be supplied along with installation., the touch display must have zoom in and out facility., all relevant ports for audio and video must be present in all units., audio warning must be available with system. separate speaker to be provided., all relevant documents to be provided., minimum warranty of 03 yrs must be provided, imparting training to trainers at ins valsura for 03 days.

CTN :39040806

14 Jul, 2025 78.16 Lacs

Ernakulam - Kerala

Tender For bid to ras bid to ras corrigendum : supply of 635 nm free space acoustic optic modulator aom with rf driver module and sma cables , 532 nm free space acoustic optic modulator aom , cmos camera with tripod mount adapter , free space avalanche photo detector temperature compensated with compatible power supply , rf amplifier , bias tee , gan laser diode green , gan laser diode blue , adjustable laser diode collimation tube and optics , laser diode mount with integrated tec and controller , trans impedance amplifier , acoustic optic frequency shifter aofs fiber coupled with rf driver module frequency shift 80 mhz and interconnect cables , acoustic optic modulator fiber coupled with rf driver module frequency shift 40 mhz and interconnect cables , miniature splice protection sleeves of 25 mm length , miniature splice protection sleeves of 40 mm length , fc apc to fc apc simplex patch cord 1m length 1550 nm , fc apc to fc apc simplex patch cord 2m length 1550 nm , fc apc to fc apc simplex patch cord 10m length 1550 nm , fc apc to fc apc simplex patch cord 20m length 1550 nm , fc apc to fc apc simplex patch cord 5 m length 980 nm , fc apc to fc pc simplex patch cord 2 m length 1550 nm , fc apc to fc apc mating adapter narrow key slot panel mount d hole type green dust cap , 8 channel 200 ghz channel spacing dense wavelength division multiplexer dwdm compact package , single mode fused fiber coupler type 2x2 1550 nm coupling ratio 50 by 50 , 1550 nm polarization independent fiber optic isolator , dust cap green colour for fc apc connector 2.5 mm ferrules , dust cap for fc adapter port red colour , fiber stripper , fiber optic microscope with external monitor , photo detector battery operated , optical power meter , 1480 nm pump laser diode , single mode bare optical fiber as spools of specified length , single mode bend insensitive bare optical fiber as 5 km spools , polarization maintained fiber coupler coupling ratio 50 by 50 , polarization maintained fiber coupler coupling ratio 90 by 10 , polarization maintained fiber optic isolator , fiber coupled low pdl electro optic phase modulator bandwidth 1ghz bid details/ 2 / 35

CTN :41018696

30 Jul, 2025 NA

Multi City - Multi State

Tender For supply of monitor 19 inch- specification: 1) resolution - 1280 x 1024, 2) aspect ratio- 5:4, 3) panel t echnology - ips, 4) adjustability - height, pivot (rotation), swivel, tilt, 5) ports : hdmi-1 displayport- 1 vga - 1, 6) display type- led-backlit lcd monitor / tft active matrix. make brand - dell, acer or similar. [ warr anty period: 36 months after the date of delivery ]

corporations/Associations/Others

CTN :40884410

14 Jul, 2025 18.26 Lacs

Moradabad - Uttar Pradesh

Tender For supply and installation of furniture for scada control room at 33/11 kv s/s company baag distt. moradabad under moradabad smart city project distt. moradabad. - supply and fxing combind 5 user console desk size 5500mmx800mmx750mm operator control desk will have following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided. 13- earthing busbar will be provided. 14- cfl/led lamp will be provided for internal illumination. 15- per console 2 nos. 10 amp dp mcb (total 10 nos.) siemens/havells make complete with wiring and fitting will be provided. 16- per console 2 nos. 6 way pdu 5/15 power socket (total 10 nos.) complete with wiring and fitting will be provided. 17- per console 2 nos fan (total 10 nos.) rexnord make complete with wiring and fitting will be provided. 18- per console 2 nos toggle swich for fan (total 10 nos.) complete with wiring and fittings will be provided. 19- per console 2 nos, data socket (rj45) (total 10 nos.) d-link/legrand make complete with wiring and fitting will be provided, 20- per console 02 nos telephone socket (rj11) (total 10nos.) d-link/legrand make complete with wiring and fitting will be provided, 21- per console 1 nos keyboard tray (total 5 nos) ebco/innofit/harmoni make complete with all manner will be provided. 22- per consol 2 nos monitor arm (total10 nos) innofit/harmoni make complete with all manner will be provided. 23- looping will be provided for both type of power supply . all specification include the cost of all material , labour , t&p and other nessesary things required for proper completion of work. colour of lamination of table top , side , front ,back shutter and profile & frame is as per approved by e/i nsi (other important specification in annexure (1) attached as pdf), supply and fxing combind 4 user console desk size 4000mmx800mmx750mm, operator control desk will following features: 1- profile structure of operator desk will be of 3mm thick extruded aluminium with supporting crca top & bottom frame. colour: as per approval. 2- tabletop is made of 25mm mdf board. colour: as per approval 3- separate horz. cable routing wire baskets for power & data cables will be provided. 4- power distribution sockets (each user stations will be provided with 2 nos separate pdb units (1 for main & 1 for ups line) each pdb unit will have 6 points of 5/15a sockets with mcb. 5- 25mm mdf board side panels (fixed side panels). colour: as per approval. 6- 18mm mdf front & back modesty panel/shutter (openable with hinge and locks). 7- cpu sliding tray and back modesty will be made of powder coated crca sheet. colour: as per approval.8- 2 nos of exhaust fan will be provided for adequate heat management for each section.9- ventilation louvers will be provided on both front & rear modesty with air filters.10- retractable key board tray will be provided in each section. 11- cpu will be mounted on cpu sliding tray.12- hinges for the doors shall be provided.

CTN :40973775

26 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of indoor led wall 9 x 6.6 ft with 8 input quad mode , display wall controller with 15.6 inch table top touch panel and touch panel stand , display wall processor , output switcher , l2 switch , 75 inch side display , audio amplifier , ceiling speaker , monitor speaker , integrated tile mic , wired handle mic , ups 15 kva online , utp lan cable , rj 45 connector , hdmi cables , creation of facade for indoor led wall led screen side display brackets for all items , vertical hand screen dispenser system size 9x7 ft including installation , visualizer , multimedia projector , desktop computer

CTN :40977611

28 Jul, 2025 NA

Indore - Madhya Pradesh

Tender For supply of upgradation of kautilya lhcc of army war college c c - video wall 23 1 ft by 15 point 7 ft plus controller , fix a video wall support structure constructed from square ms pipes , 98 inch video monitor display , 65 inch interactive display panel with ops , compact active stage monitor , lecture hall entry sinage , 4k 8 by 8 matrix switch , hd base tt extender rx , high quality audio signal cable , speaker cable , 3 mtr fiber hdmi cable , 5 mtr fiber hdmi cable , 10 mtr fiber hdmi cable , 15 mtr fiber hdmi cable , condensor microphone capsule , metal gooseneck stick , system interconnects , professionals power sequence controller , dsp full rack 19 inch 1ru processor , pair rimless 5 point 5 inch ceiling loudspeaker 20 watt , poe double plus managed switch 8 port , four channel poe amplifier with integrated dante networking , celing microphone , 65 inch oled large format display , retractable table monitor , supply installation testing and commissioning sitc of room ) /bid number : gem/2025/b/6422787 * /dated: 07-07-2025 & & / bid document 1 / 24

CTN :40922525

22 Jul, 2025 NA

Kamrup - Assam

Tender For supply of community radio station at dirang - 50 w fm transmitter , two bay 2 dipole , rf cable rf co axial cable 50 mtr with n connector , 19inch ru eqpt rack for transmitter , 100w dummy load with matching transformer , manual change over panel with three patch card for switching between main and standby tx , supply installation testing and commissioning of 30mtr self supported tower on ground with foundation erection galvanizing earthing lightning arrestor aviation light , 10 band fm audio broadcast processor internet streamer with iphone android application , monitor speaker 50w , 12 ch analog mixer , 16 ch analog mixer , rj condenser microphone , desktop audio work station , 2 channel usb sound card , table top stand , flexible microphone stand , headphone , playout software with logger , dynamic cardioid microphone , hand held recorder , audio distribution amplifier 1 stereo input and 6 stereo output , headphone distribution amplifier 1 stereo input and 6 stereo output , studio on air light , misc installation material like audio cable connector etc for the installation of above mentioned eqpts , installation and commissioning work to make the crs fully functional include , wall acoustic work 10x12x2 , brick wall partition work for studio room , brick wall partition work for recording room , wooden sound proof door , observation window , production table to house the console , on air table , transmitter room table , electrical work , earthing , heat radiator , license crs , content creation ppl license , station manager , technician , radio jockey member one , radio jockey member two

CTN :40865390

17 Jul, 2025 77.00 Lacs

Jirania - Tripura

Tender For e-tender (2nd call) for procurement of laboratory instruments, equipment, appliances for the college of veterinary sciences and ah, rk nagar under the nec funded project for the year 2025-2026 - biosafety cabinetclassii, a 2 with accessories and power back up (bacteriology)-- the biological safety cabinet should be of class ii, type a2 designed in compliance with international standards the biological safety cabinet quoted instrument model must have international standards test likensf, tuv nord, en 12469 certification. certificate copy must be provided along with the technical bid. working area should be around 4foot. it should have exterior dimension w x h x d of 1300x 1568 x 800 and interior dimension wxhxdof 1200x 780x 630 it should have 1 piece grade 304 stainless steel or thermos scientific smart coat interior itshouldhavefeatureforpersonalprotection,sample protection, cross contamination protection and environmental protection. it must utilize brushless dc motor technology which uses significantly less energy with less heat emission provision compared to traditional ac motor technology to ensure lower levels of energy consumption. it should have 10 sloped front for exceptional comfort and ergonomics thesystemshouldbedesignedwithdualmotor. the motor must automatically adjust or control fan speed in real time to maintain constant airflow during filter loading or temporary obstruction. air flow direction: vertical laminar flow & air intake across front opening and 70% recirculation. filter: high performance particle air filter h14(hepa en1822), filtering efficiency 99.995% mpps or better. energy saving mode when cabinet not in use with maintaining sterility. continuous airflow helps to maintaina sterile environment, evenwhen the cabinet is not in use. thesystemshouldhaveindependentsensorstodetect pressure changes across the exhaust and down flow plenum/ air velocity and should indicate alarm signal when a 20-30% change in inflow/ exhaust or down flow occurs. control panel and performance monitor displays inflow/ down flow velocities, hours of use etc. to verify proper cabinet operation. frontglasswindowshouldbeeasilyloweredfor thorough smart cleaning of inner surfaces and designed to protect users by maintaining inflow, even when the window is lowered. the uv light must be quoted which should be programmable from 30 min to 24 hrs. in minimum 30 minutes increment to shut off automatically. the settings must allow the user to program the timer. the cabinet noise level must be less than 63 db(a) as measured in a sound proof room to promote more comfortable and safer working habitsof the user a per nsf/ ansi 49. the controller must be located on a slanted frontpanel so it is easy to see from a seated working position in front of the cabinet. control panel should be a large digital color touch screen display with health monitoring system, valuable safety and performance data with constant read-out of downflow/ inflow velocities and hours of operation in real-time, number of hours of use on the hepa filters. the front window sash must be angled 10 sloped front for operator comfort. two pieces of removable and autoclavable stainless steel arm rest should be provided for operator s comfort without disturbing the air flow. the system must have audio visual alarms to indicate when inflow is restricted and as well as whether front window is in correct position or not. theworkareashouldbeilluminatedwithswitchable fluorescent lamp of lighting power >120 fc or higher. suitable height floor stand without casters should be provided. in built access ports, 2 nos. (1 on each side) shouldbe available. it has single piece stainless steel work tray for easy cleaning and decontamination. warranty:minimum3year. electrical supply available: 230v a.c, single phase, 50 hz. bidder should provide printed brochure of the quoted model and details specification should be available in the manufacture website. customized model would not be accepted wi

corporations/Associations/Others

CTN :40823874

11 Jul, 2025 NA

Bhubaneswar - Odisha

Tender For supply of central medical gas and vaccum supply. , bed head panel with 2 oxygen outlet, 2 vaccum outlet and 2 air outlet (if facility of air outlet is not there ventilators can run on air compression) , there should be at least 12 electrical points per bed , icu beds (motorized)-six , central nursing station (connected beside multi monitors) , bed side multi para monitors , (on each bed with facility to monitor ecg, heart rate, spo2, nibp, temperature) , (out of six beds three beds should have facility of two invasive monitoring) , respiratory ventilator (quantity required-two) , non invasive ventilators (quantity required-two) , transport ventilator (quantity required-one) , multimonitor [for transport of patient] (quantity required-one) , syringe in fusion pump (quantity required-ten) , cardiac monitor with defibrillator (quantity required-one) , abg machine (quantity required-one) , bed side- ultrasound.

CTN :40812513

14 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of supply and installation of light interface unit , supply and installation of motorized ip-based project series cameras , supply and installation of 100g ethernet transceiver module , supply and installation of electrical power point , supply and installation of sc to lc patch cord , supply and installation of 4u indoor server wall mounted rack , supply and installation of optical fiber pigtail , supply and installation of ups or surge protectors , supply and installation of lan cable , supply and installation of cctv monitor 55 inch , supply and installation of poe network switch, 8x network port , supply and installation of optical fiber cable , supply and installation of pvc protector pipe , supply and installation of network video recorder with ai motion , supply and installation of repeater panel 32 inch , supply of hard drive for backup 10 tb , supply and installation of video analyzing system software , services

Sound Monitoring System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others