Latest space frame Tenders | Government space frame Tenders

Central Government/Public Sector

CTN :45335672

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of aar approved cartridge tapered roller bearing class 'k' (6 1/2"x9") complete (double cup.cones rollers. cage, spacer, seal wear ring/bore clip/distance ring. grease seals grease backing ring andend caps etc). for use on freight stock to rdso spec no. ab/rb-41-2016, rev-1 along with locking plate, axle end caps screws for end holes of axles, narrow jaw adapter with lug side frame key & key bolt & nut. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45338386

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tefc foot mounted sq cage induction motor 30hp,415v 3ph 750rpm, class 'b' insulated, frame size 225m. suitable for fan application. mounting type v5. conforming to is:325 and ip 55. make: seimens, ngef, bharath bijlee, kirloskar, abb. warranty: 12months from the date of commissioning or 18months from the date of supply. [ warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45338387

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For totaly enclosed fan cooled sq.cage induction motor 25 hp of frame size 200l, 6pole,class f insulated,415volts 3phase, foot mounted, minimum energy efficient ie-2 conforming to is 325 and ip55 latest. the tenderer is requested to enclose the technical catalogue along with supply. warranty: 18months from the date of delivery or 12 months from date of commissioning whichever is earlier. [warranty period: 12 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45338388

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For tefc sq cage induction induction foot mounted motor 25hp,415v, 3ph, 50hz ac,4pole,frame size 180m,class f insulation,duly s1,conforming to latest is 12615-2011,minimum efficiency class ie3 and protection class minimum ip55.makes:siemens,bharath bijilee,kirloskar,ngef,abb,alstom,cg warranty: 12 months from the date of commissioning or 18 months from the date of supply whichever is earlier. note: the firm shall confirm the terminal box position before supplying the motor. only authorized dealers/manufacturers to quote. [ warranty period: 12 months after the dateof delivery ] ]

Central Government And Public Sector

CTN :45154702

18 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : 7.5hp, 4p, 132s, foot cum flange mounted sq cage induction motor to the following specification: 1)rated power :7.5hp 2)rated voltage : 415%b1 10%v 3)phase :3 4)frequency:50%b1 5hzac 5)pole:4 6) frame size:132s 7) mounting : foot cum flange mounted 8) insulation class: f 9) duty:s1 10) enclosure: totally enclosed fan cooled 11) body:cast iron 12) winding : copper 13) conforming: is12615:2018,is:325 latest 14) minimum efficiency class : ie3 15) protection class : minimum ip55 makes: siemens , bharath bijilee, cg, kirloskar, hindustan , ngef, abb, alstom, havells, crompton, crompton greaves, ge, marathon. note: only authorized dealers /manufacturers to quote. warranty:12 month from the date of commissioning or 18 months from the date of supply whichever is earlier [ warranty period: 12 months after the date of delivery ] ]

CTN :45318399

04 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of bldc motor for 3.5 inch propeller , bty 650-850 mah 4s lipo , 3.5 inch propeller , collapsible cage , unibody frame

CTN :45292420

12 Jun, 2026 NA

Khammam-T - Telangana

Tender For supply of 2.2 kw, squirrel cage induction motor, 4 pole, frame size: 100l, horizontal foot mounted, s1 duty , 3.7 kw, squirrel cage induction motor, 4 pole, frame size: 112m, horizontal foot mounted, s1 duty

State Government

CTN :45317541

22 Jun, 2026 NA

Hyderabad - Telangana

Tender For tggenco-(5x800mw) ytps-design, engineering and construction of 2 nos raw coal storage sheds of sizes 225x114x36.60m and 190x72x36.60m with space frame structure including electrification and fire fighting system at chp area of (5x800mw) yadadri thermal power station, veerlapalem (v), dameracherla (m), nalgonda dist.

State Government

CTN :44927486

10 Jun, 2026 1.51 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of ring granulator of l and t make for chp-i, 2x600mw, sstpp, mppgcl, dongalia. - suspension bar, moc- astm-a322 grade aisi 4140 suspension arm (01 set. = 25 nos. for one no. rg), moc-astm-a108/aisi 1045 end disc drive side, moc- astm-a108/aisi 1045 end disc non side, moc- astm-a108/aisi 1045 cage frame (without screen plates & adjusting mechanism), moc-is:2062 breaker plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. upper screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. lower screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. kick off plate, 1set=2nos for no rg with fixing bolts, moc-mn steel is:276, gr.iii 40mm thk.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Space Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors