Get complete information related to latest Spark Insulator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Spark Insulator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Spark Insulator Tenders.
Tender For sitc of ductable split ac system at mcf hassan - ductable split air conditioner , cpvc pipings , cable trays, clamps, painting materials etc., , volume control damper with actuators , copper refrigerant line suction line , copper refrigerant line liquid line , copper armored power cables incoming cable , copper armored power cables for interconnecting indoor and outdoor unit , 0.6mm thick gss ducting , 0.8 mm thick gss ducitng , 1.0 mm thick gss ducitng , self adhesive nitrile rubber thermal insulation , manually operating volume control damper , fire smoke dampers , fire damper actuators , fire alarm system , duct silencer , gi frame for outdoor unit , spare micro processor controller , spare condenser fan assembly , spare blower runner assembly , spare air filers , spare fire alarm system , spare fire damper actuator , integration, installation, testing and commissioning of new ductable split ac units service charges , dismantling and shifting packaged ac units service charges , reinstallation testing and commissioning of packaged ac units service charges
Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo
Tender For corrigendum : supply of phoneix contact make electrical spares - switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-5a as per annexure-1a , switched-mode power supply, 1-phase, with push-in clip, control in primary circuit, input ac 100-240v, output dc 24v-10a as per annexure-1a , switched-mode power supply, 3-phase, control in primary circuit, input 3ac 320-575v, output dc 24v-40a as per annexure-1a , insertable miniature relay dc 60v, 1co, load - 230v-6a as per annexure-1a , insertable miniature relay dc 110v, 2co, load - 250v-8a as per annexure-1a , modular unit for relay mounting, 1co, power supply ac-dc 230v, width 6.2mm, rcz-filter in control circuit side as per annexure-1a , modular unit for relay mounting, 2co, power supply ac-dc 230v, width 14mm, rcz-filter in control circuit side as per annexure-1a , universal terminal block, gray, 32a, 1000v, standart size 2.5, width 5.2mm, doubleside screw connection as per annexure-1a , pe-terminal yellow-green, 32a, 1000v, standart size 2.5, width 5.2mm, double-side screw connection as per annexure-1a , universal terminal block, gray, 41a, 1000v, standart size 4, width 6.2mm, double-side screw connection as per annexure-1a , divider plate, length 42.5mm, width 2.5 mm, height 30.5 mm, colour gray as per annexure-1a , fuse terminal, black, 6.3a, 24v, standart size 4, width 6.2 mm, fuse 5x20, indicator 24v ac-dc as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 2co, load - 250v-8a, relay, base, led, clamp, plate as per annexure-1a , power socket, 3-pole l-n-pe, rated current - 16a, 230 v ac as per annexure-1a , spd, for 4-wire power supply systems as per annexure-1a , switched-mode power supply, 3- phase, control in primary circuit, input 3ac 320-575v, output dc 24v-5a as per annexure-1a , modular relay insulation, ac 230v, 50-60 hz 4co, load - 250v-5a, relay, base, led, clamp, plate as per annexure-1a , terminal with overvoltage protection, 10a, 24v, width 6.2 mm, black, double-side screw connection as per annexure-1a , switched-mode power supply, 1-phase, with pushin clip, control in primary circuit, input ac 100-240v, output dc 24v-3a as per annexure-1a
Tender For supply of 2000 kvae 1500 rpm, 415v, 0.80 pf -lag-, prime power dg set with radiator on common base frame , fuel day tank of 990 litres capacity with accessories , 24v dc, 360 ah, minimum, lead acid automotive type battery , 24 v dc float cum boost battery charger , necessary fuel piping from day tank to engine , exhaust piping, with insulation and aluminium cladding upto 30 meters height with supports , galvanised pre-fabricated support structure for exhaust piping, common for two dg , galvanised pre- fabricated support structure for exhaust piping- for one dg , acoustic enclosure for one dg with ventilation fans, exhaust fans, if applicable, and lighting fixtures. , lt power, control and instrument cable including all accessories like lugs, glands, ties etc , b-check kit to be supplied at the time of commissioning , first fill of lube oil, coolant and coolant conditioner to be supplied at the time of commissioning , tools and tackles for offered dg set , alternator phase side and neutral side terminal box with ct , mandatory spares for dg sets and panel , amf panel , supervision of erection for one dg set , supervision of testing, commissioning and load trial of one dg set , total freight charges for all supplies including spares
Tender For supply of glf spares at rajhamundry airport - supply of 200w 6.6a bi pin halogen lamp for existing papi and simple approach as per icao car and aai specification complete as required. make osram or other equivalent approved make. , supply of 105w 6.6a reflector halogen lamp with inbuilt holder suitable for inset fittings as per icao car and aai specification complete as required. make osram or other equivalent approved make , supply of 100w 6.6a bi pin halogen lamp with holder for existing runway end lights as per icao car and aai specification complete as required make osram or other equivalent approved make , supply of 1cx16 sqmm size 5 kv grade airfield lighting cable copper conductor pvc insulated pvc sheathed unshielded anti termite and rodent treated ug airfield lighting cable as per specifications. , supply of 250a hrc fuse suitable for 50kw nasu make ccr , supply of 160 100a hrc fuse scr fuse , supply of 63a hrc fuse suitable for 4kw ccr , trip indicator fuse for scr fuse , prismatic clear lens for sapl light , 200w 6.6 6.6a isolation transformer for papi and sapl systems. , 45w 6.6 6.6a isolatin transformer for taxiway lights. , supply of rubber neoprene gasket suitable for round base plate of runway taxiway edge light fitting housing boxes, as per aai specification etc complete as required , supply of self bonding electrical insulation ht tape roll 10mtrs plus or minus 10 percentage each roll of width 19 to 25 mm, 3m make scoth 23, aai specification complete as required. , supply of omega multipurpose compound rubber, single side usage specification gauge 0.8mm and net weight 1kg each , supply of led drivers suitable for existing led flood lights, make philips, model xitantum 150w 0.7a , supply of polycarbonate made bird spikes for bird control attached to airfield light fixtures, support structures,poles poles and strutures height not more than 5 meters etc., as required , supply of 32 amps cylindrical hrc fuse 415v ac 80ka type hg, size f1 is 13703 part ii make l and t , 5 kv grade plug and receptacle of type i class b connector16 sq mm , supply of 360 degrees outer clear domes suitable for ama make runway edge light fittings , supply of 360 degrees prismatic inner clear lenses suitable for ama make runway edge lights , supply of 180 degrees yellow, right filters for suitable for ama make runway edge lights , supply of180 degrees yellow , left filters suitable for ama make runway edge lights , prismatic green filters for threshold lights , prismatic red filters for end lights , 32a hrc cylindrical fuse , supply ofled lamp with drive suitable for existing inset type omnidirectional medium intensity led taxiway apron edge light fitting for operation at 6.6 amps as per specifications makeatgairportsltd
Tender For supply of lab equipment - lab equipment, microscope with camera : should have observation method including brightfield and darkfield, should be illuminated with transmitted illuminator and led lamp, should have stage focusing mechanism with coarse handle stroke of 15 mm, should have features for coarse adjustment limit stopper and torque adjustment for coarse adjustment knob, should have field trinocular diaphragm, should have revolving nosepiece with manual with 4 standard positions , should have manual stages with right-hand control having built-in x: 76 mm, y: 30 mm, should have built in manual abbe condenser na 1.25/ w.d. - (4x 100x), standard (fn20) observation tubes-trinocular should be included, should have 30 tube inclination angle or equivalent, trinocular tube light path selection (camera: observation) :0%:100%, 100%:0%, should have interpupillary distance adjustment: 48 75 mm, dimensions (w d h): trinocular: 198 (w) x 398 (d) x 430 (h) mm, weight should be not more than weight: approx. 6.5 kg, compact design, should be supplied with 15 mega pixel or more camera attachment and computer to visualize sample, should be supplied with dust cover complete set. with c-mount stand, camera, computer, should have microscope camera software and image processing system, computer system should contain desktop (minimum 12th gen intel core i3, ram minimum 8gb, windows 11, ms office 2021, wi fi 6, bluetooth 5.2 monitor minimum 18 inch and above, fhd, ips display, eye comfort), keyboard and mouse for operating microscope, service and operation manuals to be provided; warranted for 1 years or more after satisfactory installation., magnification lens with light: magnifier is made of high quality glass. white energy-efficient led bulbs. the glass lens magnification 3x to 45x magnification. the large lens diameter 87 mm handle length 4.1 inch, digital weighing scale: electronic balance should have the following functionality, upto 220 g capacity; 0.001 g readability; brilliant display; internal calibration; robust construction; easy levelling; maximum capacity: 220 g, minimum load: 10mg, readability: 0.1 mg or better, settling time: 6 s or better, adjustment: internal, display: backlit lcd, weighing pan size: upto 90 mm , micro processed based digital display with on/off mode, build with die-cast aluminium material, should have adjustable feet for uniform levelling. should be iso, ce certifiedshould provide user, technical manuals to be supplied in english language, it should have interface rs232, service and operation manuals to be provided; power supply: ac 230v/115v,50/60hz, warranty -1year or more, authorization letter, hot air oven : double walled unit with inner chamber of stainless steel, outer chamber of mild steel duly powder coated. temperature thermostatically controlled range: 50 c to 200 c 1 c. beaded heating elements are placed in the ribs at the bottom and sides mineral /glasswool insulation, capacity: 200ltr or more, corrosion resistant body for longer life, air circulation fan for better heat circulation and dry of sample, complete with l shape thermometer, two indicators, thermostat and on / off switch, microprocessor based pid temp. controller cum indicator, adjustable selves: 2 or more, inner dimensions: 600 x 600 x 600mm or more, it should have concealed ss handle and positive latch system. controller should be equipped with timer, auto tuning and alarms. supply voltage: 230 v ac, 50 hz, single phase. should have local service setup for prompt and efficient post-sales support. warranty 1 year or more, muffle furnace: unit should be suitable for laboratory, it should be fitted with good quality tiles set, with ceramic fibred insulation. unit capacity: 4 litre or more, outer casing of thick mild steel duly painted / powder coated. working temperature ranges from 50 c - 1150 c is controlled by digital temperature cum indicator with e. r. control device for fine control. dimension should be compact: 125 x 125 x 250 mm, u
Tender For supply of miniature circuit breaker 4 pole of capacity 40 amp, 415 / 440 v, 50 hz, c type confirming t o is : 60898-1 : 2002, , rated insulation voltage (uj ):440v, ac rated impulse withstand voltage (uimp):5 kv, rated short-circuit capacity (lcn) 10 ka, each circuit-breaker shall be marked as per is 60947.2.2003, protection type: l- for overload protection (thermal) & i- for short-circuit protection (magnetic), suitable for panel mounting, screw-type terminals, protection type - l for overload protection (thermal) & i for short-cir cuit protection (magnetic), adjustable thermal-magnetic trip and protection unit, fixed magnetic settings a nd with toggle control. [ warranty period: 30 months after the date of delivery ]