Latest speed bump Tenders | Government speed bump Tenders

CTN :45678875

09 Jul, 2026 NA

Burhanpur - Madhya Pradesh

Tender For supply of speed bumps large , speed bumps small , information board , road marker , gentry board , median marker , entry board , solar powered road marker

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

CTN :45668012

07 Jul, 2026 NA

Goa - Goa

Tender For supply of tower bolts (non-ferrous metals) v2 as per is 204 (q2) , led luminaire for high bay lighting (q3) , curtain pipe, sider and mounting bracket (q4) , hydraulically regulated door closers conforming to is 3564 (q3) , wire mess gi 3 ft hieght 0 point 63 mm nominal dia of wire and avarage width of aperture 1 point 40 mm , holder for curtain , socket for curtain , pgi sheet 12m x 0 point 61 m , door handle 150 mm , snake guard door seals , lock for cupboard , wooden polish , paint brush size 1 inch , paint brush size 2 inch , paint brush size 4 inch , paint brush roller , enamel paint black , enamel paint white , enamel paint smoke gray , enamel paint og , turpentine oil , touch wood , shellac , malmal cloth for polish , yellow powder for polish , brown powder for polish , orange powder for polish , emery paper 120 grti , emery paper 80 grti , mcb dp dustubtion bord 4 way , wire mess gi 4 ft hieght 0 point 63 mm nominal dia of wire and avarage width of aperture 1 point 40 mm , cp knob for drewer 40 mm , gi connector 20 mm 15 mm , gi connector 25 mm 20 mm , joint solution solvent cement 50 ml , m s nails huf inch , s s nails huf inch , s s nails 1 inch , s s nails 1 and huf inch , s s nails 2 inch , paint brush size 3 inch , thinner , acrylic distemper , ss screws huf inch , ss screws 1 inch , ss screws 1 and huf inch , alluminium wire mesh 1 point 2 x 15mtr , bracket 19 mm , screw 19 x 6 , screw 32 x 8 , screw 25 x 8 , nail 17 x 1 , nail 19 x 1 by 4 , nail 14 x 1 , nail 14 x 2 , nail 14 x1 point 5 , butt hinges stainless steel 100mm , butt hinges stainless steel 75mm , continuous piano hinges stainless steel 8 fil length , continuous piano hinges stainless steel 6 fil length , t hinges ss , double acting spring hinges ss , 300mm long ordinary rat tail , mortice lock 4 levers 75 mm , mortice lock 4 levers100 mm , aluminium hooks and eyes 100mm , aluminium hooks and eyes 150mm , hasps and staples 100mm , magnetic latch for cupboard , door stopper , cotton waste , grease white , grease black , anchor fastner 16mm x 150mm , anchor fastner 8mm x 75mm , anchor fastner 10mm x 100mm , solar road stud , pvc portable speed bumps plastic , abs rectangular road stud , aluminium road stud , pvc portable speed bumps rubber , fire ball for fire safety , fevicol , gloves for polishing work , whire cement , chorophinicol anti termainte solvent , convex mirror 36 inch , convex mirror 24 inch , mild steel fixed delineator , polygrip sr 409 fast drying foam adhasive , french polish , astronomical timer for street light control 30 kw , pscs single phase atronomical 18 w //bid details 2 / 97

CTN :45197349

24 Jun, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of 125mm long. , aluminium tower bolts 100mm long. , gi red elbow 15mm x 20mm. , aluminium tower bolts 150mm long. , stainless steel sliding door bolt 300mm , aluminium curtain rod 19mm dia 20 feet length , gi plug 15 mm dia. , aluminium aldrop bolt 150mmx12mm dia , hasps and staples aluminium 100 mm , gi nipple 20mm dia x 50mm length , pvc water storage tank 500 ltr , pvc tank 1000 ltr capacity , wash hand basin 550x400mm , pvc low level flushing cistern 10 ltr capacity , european wc with s trap , glass pane 4mm , iwc orrisa patern 580 x 440 mm , pvc rain water pipe 100mm 6m long , pvc bib tap long body 15mm bore , float valve pvc 20mm dia , pvc bib tap long body 15mm , pvc waste pipe 32 mm dia for urinal , bitumen tape flash strip 100mm wide 10 mtr long , pvc connection of size 15mmx600mm , glass pane froasted 4mm , 4- tier metal shoe rack, 20 pairs metal shoe tower shelf storage cabinet 35.6 x 11.9 x 33.3 inches , pvc internal fitting for ll cistern , m seal. , looking mirror 21x15 inch with pvc frame. , angle stop cock ptmt 15mm dia. , kitchen sink coupling 100mm best quality. , pillar tape ptmt 15mm dia. , kitchen sink with drainboard of 1mm thick 37 x 18 x 8 inch. , road stud rectangular poly carbonate 125mm x 125mm x 25mm with a shank of 65mm red or yellow. , dark eye polyurethane portable speed bumps size l-500xw-100xh015mm , self adhesive bituminous felt fibre glass based. 3mm thk for water proofing in 20 mtrs roll. , glazed oil putty in 10kg bag. , pvc float valve for ll flush cistern , pvc float valve 25mm. , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 4 feet wide x 15 or 20mrs long. , pvc connection of size 15mm x 450mm. , pvc waste pipe 32 mm dia 900mm corrugated , pvc water tank cover 500 ltrs. , speed bump made from heavy duty abs or yellow combination. l 70mm w 23mm available on both sides in red yellow colour with h 75mm w 250mm cat no se 503 , ss wire mesh mosquito proof 24 guage 16 aparture in standard roll size 3 feet wide x 15 or 20 mrs long. , plastic seat cover for wc white. , pvc bathroom cabinet 510x450x100mm with mirror one side plate complete. , bitumen washer for roof sheet , pvc waste pipe 32 or 40mm dia with swivel arm 225 mm. , pvc shower rose 125mm dia with swivel arm 225mm. , helical door spring 150 mm , pvc connection pipe for gyser inlet 15mm x 450mm long. , pvc waste pipes 32mm dia for whb. , pvc flush handle for ll cistern , pvc conncetion 600mm. , tank nipple 20mm with check nut , rubber gasket beading for doors 40mm widex6mm thick , tank nipple 15 mm with check nut , pvc waste coupling 32mm dia for wash hand basins. , bitumen leak stop best quality , shower rose ptmt 15mm x 100mm , pvc stop cock 15mm , white cement in pack . , wooden beading 10mm width for doors and windows. , pvc grating 100mm dia for floor. , stop cock ptmt 15 mm dia , nails wire 75mm. , pvc waste pipes 32mm x 750mm long. , wire nail 25mm long x 2mm dia. , nail 30 or 25mm. , hasps and staples aluminium 150mm. , nails 50mm. , nails 40mm , hacksaw blade 12 inch. , shalipatch ready made bituminous pot hole patching mix , kit for pvc low level cistern 10 ltr cap white colour , cushion foam 32 mm density covered with super cloth 22 feet x 21 feet. , teak wood beading 2 inch used on edges of doors, window etc , plywood commercial 4mm thick 8 feet x 4 feet conforming isi ost face , teak wood beading 2 inch used on edges of doors windows etc , ply wood commercial 12mm thick 6 feet x 3 feet conforming isi , spirit de-natured , lakh dana for polishing , ply wood commercial 12mm thick 7 feet x 3 feet conforming isi , thinner //bid details 2 / 114

Central Government/Public Sector

CTN :45638111

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of partition frame for lsdd amrit bharat 3.0 ( (note- colour scheme is as per design letter no md48161 dated- 15/05/2026 ), as per drawing: mp26pfgsab3.0 version 0, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed.8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period:30 months after the date of delivery ] ]

CTN :45596568

30 Jun, 2026 49.38 Lacs

Ropar - Punjab

Tender For p/laying road marking, p/instalation of solar cate eye, provide & fixing of o cautionary sign board, solar stud , rumble strips, convex mirrorm speed bumps on different roads of nangal township.

CTN :45443656

19 Jun, 2026 16.83 Lacs

Visakhapatnam - Andhra Pradesh

Tender For providing road line markings and fixing of pavement markers (studs), signage boards and rubber speed bumps/breakers at various locations in ward no 19 of east zone, gvmc.

CTN :45413236

10 Jun, 2026 1.60 Lacs

Peddapalli - Telangana

Tender For supply and erection of plastic speed bumps in various places in sulthanabad municipality

CTN :45203208

09 Jun, 2026 5.69 Lacs

Parganas - West Bengal

Tender For corrigendum : providing of manpower on daily basis for round the clock for cleaning the floating debris such as water hyacinth, municipal garbages, wooden logs, plastic, tyre etc. from the iron barrier grating over tp khal and maintenance of ms railing at both

Speed Bump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector