Latest speed checking equipment Tenders | Government speed checking equipment Tenders

State Government

CTN :40590852

09 Jun, 2025 28.56 Lacs

Hamirpur(Hp) - Himachal Pradesh

Tender For sop to lwss hamirpur town by upgrading of water sources at palahi on turnkey basis including survey, design, supply of equipment / material, erection, testing and commissioning to provide sop to uesd sujanpur (ed hamirpur) (deposit scheme).

CTN :40594457

18 Jun, 2025 2.10 Lacs

Tanuku - Andhra Pradesh

Tender For supply, delivery & installation of testing machanism, lab equipment for conducting daily quality testing of drinking water in tanuku municipality

State Government

CTN :40577819

17 Jun, 2025 9.48 Lacs

Jirania - Tripura

Tender For r/mtc diff rws/nrdwp/arws/uws schemes under dws sd jirania /sh supplying installation of diff electrical equipment in/c submersible pump set with motor and other accessories for dtw schemes during the year 25-26, group-i. - providing & fitting fixing of 10000 gph x 76 mtrs. head water lubricated submersible pump of maximum 150 mm outer dia. with maximun 10 (ten) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50hz, a.c. supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less pvc 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair m.s. column clamps including testing & commissioning etc. comlpete as per direction of engineer-in-charge conforming to terms & conditions of the contract. (each pump with motor shall consists of stainless stell closed type impeller , c.i. bowl, c.i discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant bis codes)., supplying of 7500 gph x 76 mtrs. head water lubricated submersible pump of maximum 150 mm outer dia. with maximun 8 (eight) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50hz, a.c. supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less pvc 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair m.s. column clamps including testing & commissioning etc. comlpete as per direction of engineer-in-charge conforming to terms & conditions of the contract. (each pump with motor shall consists of stainless stell closed type impeller , c.i. bowl, c.i discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant bis codes)., supplying of 5000 gph x 76 mtrs. head water lubricated submersible pump of maximum 150 mm outer dia. with maximun 8 (eight) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50hz, a.c. supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less pvc 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair m.s. column clamps including testing & commissioning etc. comlpete as per direction of engineer-in-charge conforming to terms & conditions of the contract. (each pump with motor shall consists of stainless stell closed type impeller , c.i. bowl, c.i discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant bis codes).

Central Government / Public Sector

CTN :40558419

04 Jun, 2025 4.96 Lacs

Chandrapur - Maharashtra

Tender For supply of testing equpment for primer and caps - beesley's balance (textiles), plastic caps, live remote temperature & humidity purpose live remote temperature & humidity, alert system, bitumen drum caps/lids, point of care testing equipments, crease recovery tester, shrinkage measurement template & scale universal, electronic milk analysr with adulteration testing equipment, photometer/colorimeter for water testing, techinical grade sulfur hexafluoride

Central Government / Public Sector

CTN :40521472

12 Jun, 2025 4.23 Lacs

Haldia - West Bengal

Tender For providing of custom bid for services - 9040c25b64 agency line up to calibrate the equipment apparatus glassware used for testing of oil and water streams

CTN :40524331

06 Jun, 2025 14.44 Lacs

Pandavapura - Karnataka

Tender For regarding inviting tenders through e-procurement for entering into rate contract with suppliers for the supply of drinking water and street lighting equipment to jakkanahalli grama panchayat of pandavapura taluk for the year 2025-26 - jak hand wash cleaner, jak hand gloves, jak mask, jak first aid box metal with all accessories, jak medium duty gi pipe of 15mm dia, jak led streetlight 200 w, jak aprons, jak medium duty gi pipe of 20mm dia, jak medium duty gi pipe of 25mm dia, jak medium duty gi pipe of 32mm dia, jak medium duty gi pipe of 50mm dia, jak medium duty gi pipe of 65mm dia, jak heavy duty gi pipe of 15mm dia, jak heavy duty gi pipe of 20mm dia, jak heavy duty gi pipe of 25mm dia, jak heavy duty gi pipe of 32mm dia, jak heavy duty gi pipe of 50mm dia, jak heavy duty gi pipe of 65mm dia, jak ledstreetlight150w, jak 120w 5700k suitable for outdoor led fitting., jak 150w 5700k suitable for outdoor led fitting., jakk 200w 5700k suitable for outdoor led fitting, jakk 240w 5700k suitable for outdoor led fitting, jakk 10 m - top 75 mm and bottom 165 mm dia, jakk 16 m - top 150 mm and bottom 410 mm dia, rdpr 50-63 a dp, rdpr pvc wire - 2.5 sqmm weight per 100 mtr coil 1.8 kg, rdpr pvc wire - 4 sqmm weight per 100 mtr coil 2.4 kg, rdpr pvc wire - 6 sqmm weight per 100 mtr coil 3.5 kg, rdpr pvc wire - 10 sqmm weight per 100 mtr coil 5.3 kg, supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 v 1/3 phase motor up to 5 hp, pvc wire - 16 sqmm al wt 4.2 kg, total wt 7.5 kg/100 mtr coil, jak 3 m - top 77 mm and bottom 105 mm dia, jak 5 m - top 75 mm and bottom 125 mm dia, jak 6 m - top 75 mm and bottom 135 mm dia, jak 9 m - top 75 mm and bottom 165 mm dia, jak 12 m/12.5 m - top 100 mm and bottom 310 mm dia, single arm bracket with 2000 mm standard 40/50 mm dia, double arm bracket with 2000 mm standard 40/50 mm dia, jak 16a, jak 32a, jak63a, jak100a, jak led streetlight 70w, led streetlight 200w, led streetlight 150w, rcc pipe np3 1000 mm dia & 2.5 m long, jak rcc pipe np3 1100 mm dia & 2.5 m long, jak rcc pipe np3 1200 mm dia & 2.5 m long, jak bleacing powder, jak 7.50 hp 90 lpm 165 m 15 stg outlet dia 2.00, jak 10.00 hp 120 lpm 176 m 16 stg outlet dia 2.00, jak 10.00 hp 90 lpm 220 m 20 stg outlet dia 2.00, jak 12.50 hp 135 lpm 210 m 15 stg outlet dia 2.00, jak 12.50 hp 120 lpm 220 m 20 stg outlet dia 2.00, jak 12.50 hp 90 lpm 264 m 24 stg outlet dia 2.00, jak 15.00 hp 155 lpm 210 m 15 stg outlet dia 2.00, jak 15.00 hp 120 lpm 266 m 23 stg outlet dia 2.00, upto 6 hp pump, jak 6 to 15 hp pump, supply and delivery at site 50mm 2 dia heavy duty unplasticized pvccolumn pipes with heavy duty collars,rubber profile ring,vibration controlprofile ring,freezing and turbulence free leak proof epdm ring with isimark with its latest amendments, supply and delivery at site 50mm 2 dia heavy duty ci adopter setcomplete suitable for upvc column pipes for submersible pumpsets, labour charges for erection, electrification and commissioning of pumpsets, including aligning and balancing of all items including supply anderection of two pair of supporting clamps, bore well caps, cable clips andwater tight gland cable protectors, bolts, nuts, valve and gauges,tools andequipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineerincharge of work., rdpr12w 6500k, rdpr15w 6500k, rdpr 18w 6500k, rdpr led streetlight 25w, rdpr led streetlight 40w, rdpr led streetlight 120 w, rdpr 25w 5700k suitable for outdoor led fitting., rdpr 40w 5700k suitable for outdoor led fitting., rdpr 70w 5700k suitable for outdoor led fitting., rdpr upto 12.5 hp, rdpr 6-32 a dp, rdpr 40 a dp, jakppura 30 stg , jak 3.00 hp 90 lpm 66

corporations/Associations/Others

CTN :40491137

17 Jun, 2025 57.14 Lacs

Jammu - Jammu And Kashmir

Tender For supply of washer extractors , drying tumblers , flatwork drying ironers , electric steam generator , air compressor , vacuum finishing table , water treatment system , installation training testing commissioning , buy back old equipment

State Government

CTN :40423009

02 Jun, 2025 3.50 Lacs

Awantipora - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of electro-mechanical equipment at water supply scheme arihal arigam of jal shakti (phe) mechanical division south awantipora under jjm.

Central Government / Public Sector

CTN :40311367

05 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : tender for supply of restriction orifice for p25 project at iocl panipat refinery --field-applied coal tar enamel pipe coating systems: application, performance, and quality control , coatings and linings over concrete for chemical immersion and containment service , corrosion control of offshore structures by protective coatings , control of external corrosion on underground or submerged metallic piping systems liquid-applied internal protective coatings for oilfield production equipment , extruded polyolefin resin coating systems with soft adhesives for underground or submerged pipe , discontinuity (holiday) testing of new protective coatings on conductive substrates holiday detection of fusion-bonded epoxy external pipeline coatings of 250 to 760 um (10 to 30 mils) , measurement of protective coating electrical conductance on underground pipelines offshore platform ballast water tank coating system evaluation , test procedures for organic-based conductive coating anodes for use on concrete structures , aboveground survey techniques for the evaluation of underground pipeline coating condition , laboratory methods for the evaluation of protective coatings and lining materials on metallic substrates in immersion service , evaluation of internal plastic coatings for corrosion control of tubular goods in an aqueous flowing environment , evaluation of internal plastic coatings for corrosion control of tubular goods by autoclave testing , holiday detection of internal tubular coatings of 250 to 760m (10 to 30 mils) dry film thickness , exterior protective coatings for seawater immersion service