Latest spigot Tenders | Government spigot Tenders

CTN :44482391

25 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of spigot, size 85x60x25 mm for outer spring of spring plank.

Central Government/Public Sector

CTN :45090738

07 May, 2026 NA

Ajmer - Rajasthan

Tender For supply of o ring for spigot of air spring for lhb, demu, memu coaches as per rdso str no.rdso/cg/s/23002 rev. 1. shelf life 12 months[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]

corporations/Associations/Others

CTN :45072549

18 May, 2026 NA

Bankura - West Bengal

Tender For supply of set of seals for servo valve , set of seals for cylinders , set of seals for double gear pump , set of seals for combined control pressure releif valve , feedback spring , restraining spring , pressure filter , set of seals for filter , pre restrictor filter complete , set of seals for actuator , nozzle point case , pre restrictor for leak off valve maw 50 , set of seals for gear pump , set of seals for cylinder , set of seals for combined control pr relived valve , set of seals for actuator type ess h1 , set of seals for cylinder cylinder diameter , set of seals for pressure relief valve , set of seals for gauge shut off valve , filter pressure element , filter suctionpart , electronic position feedback transmittor including mounting set , 3 phase electric motor 415 v 50 hz 37 kw reineke part no 50by00155 for reineke make irkah type actuators , gear pump tfp 1001part no 55by00005 , restrictor return flow restrictor , double gear pump pn 55by10018 make reineke , sleeve for coupling m14 part no 52by50001 , hydraulic cylinder gz 60by30by30 part no bh15by00441 make ms reineke , coupling m14 pump side part no52by40005 ) /bid number : gem/2026/b/7467706 * /dated: 04-05-2026 & & / bid document 1 / 27

CTN :45063622

23 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vkoc005 c c - joint , main bolts , inner star , gfl bolts , gfl washer , clamping collar , clamp , valve for water pump , bush , fresh water cooler relience make , spare part kit for fw/sw heat exchanger , starting air conn.inlet , engine inlet pressure connection , governor speed setting air inlet connection , rack position limiter , fuel rack indicator , pressure transmitter p5r-4bar-4-20-1/2-pe , pitch indicator 0-20ma , pl96 , relay 4no-nc 24v dc , solenoid valve (nomo-24 vdc) , cd3 cable (5mm) , safeties reset push button , emerg. stop push button , scanner thermocouple pcb , display pcb , press.sw. (item no.17 of engraved ckt) , pressure regulator , pneu p.b. pneu return red , pneu. switch , s w engine driven pump assembly , stud m12 40 30n j12 nse1 181 , oring an7 31b6 , o ring 151i d 3d nse6.531 21a7 , filtering unit , viton oil seal 15x30x10 , fuel filter element , protect cyl head tie rod , injector body extractor , inj.pump and pump head extractor , flexible hoses , high pressure hand pump , bearing unit , bush sealing , bolt-connecting rod , o ring , thrust -stopper , top spring collar (bar) , bottom spring collar , dunb bushes 25-25 du , shaft , seal bearing housing , coupling pin , sealing joint , bs ring , type c30 , nse 6.51 , 20 , paper insert , o ring , needle roller bearing , rucompensation probe for exh. pyrometric duct , hydraulic jack for cylinder head , tool valve guide extractor , tool cylinder head test pressure , flex hose for hydraulic tool , high pressure hand pump , tee connection , safety valve , water pump impeller , scraper ring , round gasket , flexible hose for air , spare gauge glass 583 , sealing bush , piston ring , safety ring for abb vtr251-2p t/c , gfl washer , pressure switch(p 16 bars) , pressure switch(p 19 bars) , normal stop electro distributor , circuit selector , tt-314 sensor for main engine fresh water temperature , 25 pin sub d female connector , pressure gauge forbes marsh 100ss , ss316 0-4 bar glyf fil , pressure gauge forbes marsh ss316 0-40 bar glyf fil , pressure switch for s/by pp (range 0-4 bar) , pneumatic distributor pneu/pneu , sph card (sph) , lub oil pressure safety , pressure switch-1 to 10 bar , bearings individual alarm card (aip) , convertor module t454 t456 lub oil temp , svae - over speed cards , engine speed indicator 0-1250 rpm 96x96 , cock with filter , distributor iso 541 pneumatic spring , distributor iso 541 pneumatic/spring , iso1 distributor pneu.control/pneu.return , switch 3 pos. (1tc , auto , 2tc) , engine control unit (ecu) , gasket , fuel pipe m14xm14b , parallel , 750l , 9.0 i.d. , sae 100 r6 , booster servo motors with connectors , meta flex gasket , meta flex gasket , meta flex gasket , fuse 0.5a , link cable pc/tsx plc length -3mtr , oil pressure security card (sphem) , speed raise lower actuator 2no contacts , touch screen color display unit , 3 position switch , fuel pipe(return) m12x1.5 male plugxm14 x1.5 banjo(700mm) , universal crimping tool , oil mist detector , time delay relay (off delay) , pyrometric duct bank a

CTN :45063669

25 May, 2026 14.6 Thousand

Gorakhpur - Uttar Pradesh

Tender For supply of hydraulic oil pressure pipe , spigot brg , clutch assy , withdrawal brg , pressure plate

State Government

CTN :45073295

18 May, 2026 1.22 Crore

Attabira - Odisha

Tender For supply of isi marked centrifugally cast (spun) ductile iron socket and spigot pipes in connection with the work improvement of water supply to attabira town

CTN :44923973

08 May, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of reservoir for former spigot as per drg. no. afk/sk- 653-10

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

Central Government/Public Sector

CTN :44938602

07 May, 2026 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of actuator, servo, hydraulic

CTN :45024401

19 May, 2026 NA

Paschim Medinipur - West Bengal

Tender For supply of pto shaft cross , head light relay , gear linkage bush kit , clutch disc , spigot bearing , housing gear lever , wiper blade , fuel pump assy unit , clutch face plate 14 inch , pressure plate , bearing roller , wiper blade assy , relay 12v , alternate assy , relay 3 point , cabinet light , clutch master cyl assy kbx , assy sleeve cylinder , accelarator cable spacio new , coil assy ignition , reverse light switch , hub seal

Spigot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector