Latest spikes scrap Tenders | Government spikes scrap Tenders

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

Central Government / Public Sector

CTN :45698598

06 Jul, 2026 NA

Mahabubnagar - Telangana

Tender For supply of g.i. snap head pin 20x55mm with washer & copper. split pin 4x40 mm as per rdso specification ti/spc/ohe/fasteners/0120 (mar 2013). make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45567479

06 Jul, 2026 NA

Mahabubnagar - Telangana

Tender For corrigendum : supply of g.i. snap head pin 20x55mm with washer & copper. split pin 4x40 mm as per rdso specification ti/spc/ohe/fasteners/0120 (mar 2013). make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45666527

03 Jul, 2026 NA

Luckwada - Chhattisgarh

Tender For supply of 1700005139 ms plain washer 6 6x12 5x1 6 , 2100001044 ms plain washer 11x 21x2 mm , 1700001051 hex bolt nut ms m10x25mm ful thd gr 6 6 , 1700001052 hex bolt ms m10x40mm gr 6 6 , 1700001056 hex bolt ms m16x65mm gr 6 6 , 1700001070 hex bolt ms m20x65mm gr 6 6 , 1700001078 hex bolt nut ms 16mmx65mm gr 6 6 , 1700001079 hex bolt ms m16x100mm gr 6 6 , 1700005117 m 20 x 75mm ms hex , 1700005118 m 20 100mm ms hex , 1700005119 m16 125mm ms hex , 1700005129 copper rivet 5 16 , 1700005135 ms plain washer 26x44x4 mm , 1700006186 belt fasteners 2 , 1700006650 bolt nut 3 x 1 2 , 1700007709 belt fastener 2 1 2 , 1700007851 m s hex head nut bolt 20x125 , 1700009588 ms hex bolt with nut m12 x 50mm

Central Government/Public Sector

CTN :45652682

21 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : item description: supply of copper rivets of size 6x45 mm as per is : 2907-1998 and rdso specification no.ti/spc/ohe/fasteners /0120 rev-1 (march-2017 or latest). [ warranty period: 30 months after the date of delivery ] ]

CTN :45664831

30 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply of cctv camera full setup sl. no. description specification qty. 1 ip bullet camera 5 mp, outdoor, ir-enabled, poe compatible 05 nos. 2 ip dome camera 5 mp, indoor, ir-enabled, poe compatible 05 nos.3 hard disk drive (surveillance grade) 4 tb capacity 02 nos. 4 poe switch 8-port gigabit poe switch 02 nos. 5 network switch 16-port gigabit managed/unmanaged switch 01 no. 6 ups system online ups, 3 kva with minimum 120 minutes backup including batteries 01 set 7 power cable 2 sq.mm copper cable 180 mtr. 8network & associated cabling materials cat-6 cable, hdmi/vga cable, patch cords (3 m), rj-45 connectors, flexible pipes, cable ties, fasteners, clamps, saddles, junction boxes and other installation accessories as required 9 pvc/gi conduits suitable size for cable protection and routing approx. 500 feet 10 display unit 75-inch 4k uhd commercial grade led display, 24 x 7 operation rated (sony/samsung/lg or equivalent approved make) 01 no. all cameras shall support h.265/h.264 compression, onvif protocol and poe operation. hdds shall be surveillance-grade continuous recording for 30 days display unit shall be commercial-grade and designed for continuous operation. all cables, connectors and accessories shall be of reputed make and conform to relevant standards. the contractor shall provide all minor materials and accessories not specifically mentioned but required for successful completion of the work. the system shall be supplied, installed, tested and commissioned as a complete turnkey solution. [ warranty period: 24 months after the date of delivery ] ]

CTN :45230122

02 Jul, 2026 62.75 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : repairing/ reconditioning/ overhauling of bfp cartridge assembly (fk6d30) with replacement of worn out parts including dynamic balancing of rotating parts - impeller wear ring eye side , impeller wear ring neck side, , balancing drum, , floating seal, , lock nut for thrust collar, , lock washer for thrust collar, , shaft keys, , balancing drum nut, , balancing drum lock washer, , impeller abutment rings, , mandatory spares of stator, , ring sections packing rings, , suction guide wear ring, , diffuser wear rings, , discharge cover bush, , mechanical seals (make : eagleburgmann/ flowserve), , thrust bearing (make: michell), , journal bearings set (make: michell), , oil guards, , o-rings set (for ring section, water jacket, seal body, interstage etc.), , fasteners (bolts, nuts, screws, studs, plugs etc.), , back up rings, , air breather with adaptor, , copper coated gasket, , optional items of rotor, , shaft with keys, , impeller 1st stage, , impellers inter stage, , oil thrower/ oil retaining ring, , thrust collar, , coupling nut, , coupling keys, , thrust collar nut, , optional items of stator, , diffuser inter stage, , end diffuser

Central Government / Public Sector

CTN :45581458

23 Jun, 2026 NA

Mahabubnagar - Telangana

Tender For corrigendum : supply of annealed copper split pin 4mm x 36mm as per is : 549-1974 & is : 191-2007 (part-vii) (frtp-2) & rdso specification no.ti/spc/ohe/fasteners/0120. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45644737

23 Jun, 2026 NA

Mahabubnagar - Telangana

Tender For supply of annealed copper split pin 4mm x 36mm as per is : 549-1974 & is : 191-2007 (part-vii) (frtp-2) & rdso specification no.ti/spc/ohe/fasteners/0120. make/brand: rdso approved vendors accepted only. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45634087

10 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of electrical material at various institutes under nanaji deshmukh veterinary science university, jabalpur - copper wire - 1 mm , copper wire - 1.5 mm , copper wire - 2.5 mm , copper wire - 4. mm , copper wire - 6. mm , copper wire - 10 mm , aluminium wire - 2.5 mm , aluminium wire - 10 mm , aluminium wire - 6 mm , pvc pipe ¾” x 10’, pvc pipe fitting l bow and bend , pvc pipe fitting t bend, pvc pipe fitting bend, ceiling led 2’ x 2’, ceiling led 9” x 9”, ceiling led 6” x 6”, led flood light - 35 watt , led flood light - 60 watt , led flood light - 90 watt , led flood light - 200 watt , led street light – 90 watt , led street light – 60 watt , led bulb - 5 watt , led bulb - 9 watt , led bulb - 12 watt , led bulb - 18 watt , led bulb - 40 watt , lmv lamp - 90 watt , led batten light - 22 watt , main switch – 63 amp , main switch – 100 amp , main switch – 200 amp , mcb – 10 amp , mcb – 16 amp , mcb – 25 amp , mcb – 32 amp, mcb – 63 amp, mcb – 100 amp, mcb – 200 amp, spn – 63 amp, spn – 100 amp, spn – 200 amp, change over , kit kat - 16 amp. , kit kat - 32 amp. , kit kat - 63 amp. , kit kat - 100 amp. , starter (three phase) – 3 hp, , starter (three phase) – 5 hp, , starter (three phase) – 7.5 hp, , pvc casing – ¾” inch , pvc casing – 1” inch ( 1”), pvc casing – 1½” inch (ढेडइंच), pvc casing fittings - l bow - ¾” inch , pvc casing fittings - l bow – 1” inch , pvc casing fittings - l bow - 1½” inch , pvc casing fittings - t band - ¾” inch , pvc casing fittings - t band – 1” inch , pvc casing fittings - t band - 1½”inch , pvc casing nails , sheddle, sheddle1mm, sheddle2mm, sheddle 3 mm, sheddle4mm, sheddle5mm, sheddle6mm, sheddle 7 mm, sheddle8mm, sheddle9mm, sheddle10mm, sheddle 11 mm, sheddle 12 mm, sheddle13mm, sheddle14mm, sheddle 15 mm, sheddlepona inch , sheddle 1 inch, grip 6mm, pannel board , cable – alluminium – 1/2/3/3½ core , cable – alluminium - armored 1 phase – 10sqmm, cable – alluminium - armored 3 phase – 25 sqmm, cable – alluminium - armored 3 phase – 50 sqmm, cable – alluminium - armored 3 phase – 70 sqmm, cable – alluminium–p p d cable 10mm, armored cable – 1/2/3/3½ core , armored cable - 3 phase – 25 sqmm, armored cable - 3 phase – 50 sqmm, armored cable - 3 phase – 70 sqmm, joint kit ( 33/11 ), insulation tape – ( 25 nos. tape each box ), rubber tape (lt.), 11 kv xlpe cable 3 core 3phase ( 3x35-50 sqmm) , 11 kv xlpealuminium cable 3 core 3phase ( 3x70-90 sqmm) , lighting resistant 33 kv , gum boot ( size 7 nub.) , gum boot ( size 8 nub.) , gum boot ( size 9 nub.) , hand gloves – heavy duty ( l.t.) , ceiling fan – ( 1200 mm sweep ), ceiling fan – ( 1400 mm sweep ), wall fan - , exhaust fan - 9”, exhaust fan - 12”, exhaust fan - 18”, socket flush type - 6 amp , socket flush type - 16 amp , socket modular type – 16 amp , switch flush type - 6 amp , switch flush type - 16 amp , switch modular type – 6 amp , switch modular type – 16 amp , angel holder , batton holder, pendant holder, remote cell, remote cell bell, pvc combined box - 3 module , pvc combined box - 6 module , combine switch socket – 16 amp, ht cable air bunch -33kv 95 sqmm, fasteners - 3”, fasteners - 4”, fasteners - 6”, bus bar - 100 amp , cut out - 32 amp , cut out - 63 amp , jhulafor electric pole, dio fuse 33kv, regulator - electronic heavy duty modular, p.p. cable – 10 mm, hammer bid - 6 mm , flexible pipe (1/3” ), t.p.n. – 32 amp , t.p.n. – 63 amp , holder , 3 pin top ceramic , pinchis ( taparia ) , tester , screw driver ( four head ), pin insulator , disc insulator , shackle insulator , earth road , lightning arrester ( arrester) , ac box , aluminium wire -4 mm, cut out -300 amp, cut out -200 amp, pvc pipe 1 inch, regulator - electronic heavy duty non modular, regulator - switch type modular, condenser 2.5 mfd, condenser 3.15 mfd, condenser 4 mfd, condenser 8 mfd, condenser 10 mfd, extension board 6 amp., extension board 16 amp., open modular pvc box 3, open modular pvc box 4, open modular pvc box 6, open modular pvc box 8, open modular p

Spikes Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors