Latest spikes Tenders | Government spikes Tenders

Central Government/Public Sector

CTN :45719640

21 Jul, 2026 30.00 Lacs

Chakeri - Uttar Pradesh

Tender For repair/replacement galvalume sheets, ceiling and certain joinery related items in permanet and temporary bldgs of n-4, narendra ground and rama devi at afs chakeri , kanpur - taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed., ditto all as per item no.01 above but exceeding 1.5 sqm but not exceeding 4sqm each., dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed., framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde-e-165, s&f solid pvc door frame of size 50mmx 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube all as per specification and drawing., s&f factory made solid panel factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing, s&f pvc butt hinges medium weight, 100 mm long, complete all as specified and directed., s&f 150 mm size aluminum, anodised, barrel tower bolts of extruded section., s & f 125 mm long aluminum anodised bow handle fabricated type extruded section complete all as specified and directed., s&f 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 85 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 125 mm for double shutter door comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of k value 58-60 (s

Central Government/Public Sector

CTN :45737864

21 Jul, 2026 7.94 Lacs

Patti - Punjab

Tender For supply of cement bag 50 kg , course sand , wall putty , exterior paints 20 ltr , interior emulsion paints 20 ltr , synthetic enamel paint 20 ltr , thinner , 100 mm flat brushes , 50 mm flat brushes , sand paper sheet , wooden beading patti , wire mesh , 1 inch nail , 6 mm plywood , 9 mm plywood , 12 mm plywood , 25 mm plywood , butt hinges , 35mm wood screws , 25mm wood screws , white cement , hdmr board , 4 mm plain window glass , glass putty , tower bolt , sliding door bolt , door handle , fevicol , sunmika plain brown , water storage tank white with lid having spikes

Central Government/Public Sector

CTN :45578270

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For corrigendum : supply of 15od g 1by 4 inch cs bite type male connector , 15odx 3 by 4inch bspp cs bite male cnctr iso8434 , 22od 3 by 4 inch bspt cs bite male cnctr iso843 , 22od g 3by 8inch cs bite male connector , 22od 1 inch bspp cs bite male cnctr iso8434 1 , 22odx 1 1by 4inch bspp series l cs bite typ , 28odx 1 1by 4 inchbspp series l cs bite typ , 42od 3 by 4 inch bspp ss bite male cnctr iso8434 , 22od g 1 by 2 inchbrass bite male cntr , 28od 1 inch bspp brass bite malecnctr iso8434 , 35od 1 and 1 by 4 inch bspp brass bite malecnctr iso8434 , 42od 1and 1 by 2 inch bspp brass bite malecnctr iso8434 , 12od 1by 4 inch series l cs bite typ fem cnctr , 15od x 3 by 8 inch bspp series l cs bite type f , 18od x 3 by 4 inch bspp series l cs bite type f , 22od g 1by 4 inchcs bite female connector , 22od 3 by 4 inchbspp cs bite female cnctr iso84 , 28od x 1 by 2 inch bspp series l cs bite type fe , 28od x 3 by 4 inch bspp series l cs bite type f , 8od x 6od cs bite type reducer union , 28od x 15od cs bite type reducer union , 42od x 15od cs bite type reducer union , 22od cs bite type eq tee union iso8434 1 , 42od cs bite type eq tee union iso8434 1 , 22x 1 by 4 inchbsppx22od cs bite typ female br tee , 22x 1 by 2 inch bsppx22od cs bite typ female br tee , 22 x 3 by 4inch bspp x 22od series l cs female , 35od x bspp 1by 2 inch x 35 od female branch t , 28x15x28od cs bite typ red tee iso8434 1 , 28x18x28od cs bite typ red tee iso8434 1 , 35x12x35od cs bite typ red tee iso8434 1 , 35x15x35od cs bite typ red tee iso8434 1 , 35x22x35od cs bite reducer tee iso8434 1 , 42x22x42od cs bite reducer tee iso8434 1 , 1by 4 inch x 1by 4 inch bspt hex nipple brass , 1by 4 inch x 1by 4 inch bspp brass hex nipple , 1by 2 inch x 1by 2 inch bspp brass hex nipple , 1by 2 inch x1by 4 inch bspp brass hex reducing nipple , 1by 4inchbspp m ss hexagonal nipple , union fitting with 2inch bspp male 50nb w , union fittings with 1and 1 by 2inch bsp thread m , union fittings with 1 and 1by 2inch bsp thread f

CTN :45707583

11 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45724152

21 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of purg o mate automatic float air vent valve shut off valve having thread bsp-3/8 inch, 10bar, 110 degree centigrade and hexagonal ss reducer size-3/4 inch x 3/8 inch to rcf drg. no.- lw63150 alt. e item no. 4 & 7.matl. & specn. as per drg note:- make of the item should be as per drawing and advance sample approval is required as it is mentioned in drawing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45597065

30 Jun, 2026 40.0 Thousand

Jalpaiguri - West Bengal

Tender For corrigendum : supply of gpa iron picket spikes , iron picket 9 inch , testing point , fuzee , beetle cordless tele phone , drone propeller , co- excel drone catcher net , fpv drones and loiter munitions warfare book

Central Government/Public Sector

CTN :45513751

03 Jul, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

State Government

CTN :45715389

20 Jul, 2026 9.74 Lacs

Gandhinagar - Gujarat

Tender For appointment of agency for bird proofing services (installation of nets and spikes) in dta & sez area of gift city

Central Government/Public Sector

CTN :45702799

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98090616: cond. & u/s. hand tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers, different type of screw driver, hacksaw frame & blades, hammer ball, slege hammer, nose pliers, pipe wrench, hand crimping, faring tool,chisels, torque wrench and all types of wrenches, augars,iron plair, beater, sickle,knife,crow and claw bars,ratchet, tong smith, chiesel, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, tool holder, inside, hammer, feeler gauge, screw gauge, pickaxe,outside micrometres, all types of gauges, handle tap, grease gun adopter, spikes extractor, of sorts and sizes and all other scrap tools as is where is condition with/without attachment of wood/plastic handle. location:tub no.7 inside of ward04/ssd/ptj.

Spikes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector