Latest spindle nut Tenders | Government spindle nut Tenders

Central Government/Public Sector

CTN :45733180

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ubl/gsd/0330/ ms /26/c [pl no.98987331] condemned and unserviceable ms scrap consisting of the following p-way scarp items: m s liners class-iii different sizes,erc clip-iii different sizes, c-brocket ,sej brocket ,combination fish plates, ms crossing brocket ,ms bolts with nuts broken of sorts ,different types, check rail bolts and nuts, and other related pway scarp. available under the custody of cdms/rs ward/gsd/ubl. note:- bidder has to physically inspect the lot before bidding ,during the course of delivery if any nfs, ci, ss and rails found in the lot should be returned to railways.location:- road no 3, gsd/ubl bin no: 0330. remarks-. delivery should start from one end. no pick and choose allowed.

State Government

CTN :45689239

17 Jul, 2026 15.91 Lacs

Sundernagar - Himachal Pradesh

Tender For supply of wheel hub part number 110120 , brake lining kit part number 815356 , hub seal part number 121012 , sun gear part number 109050 , wheel nut part number 360398 , wheel stud part number 110035 , plate roller chain swing brake p no 405283 , plate roller chain pin swing brake p no l3767 , spindle nut part number 101273 , spindle nut lock part number 101274 , spindle nut part number 109272

CTN :45415159

25 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

State Government

CTN :45613908

22 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply. - providing and fixing sluice valve:- ivc brand cast iron double flanged manually operated sluice valve generally conform to is:14846 having body, door, dome, gland in graded cast iron to is:210, gr.fg.-260 four faces of ss astm a743 gr. cf 8 and spindle nut of leaded tin bronze to is:318, inside screwed non-rising stainless steel aisi:410 spindle. flanges to be drilled as per is:1538 part-iv & vi. valves are suitable for hydrostatic test pressure of10kg./cm2 for seat and 15kg./cm2 for body(pn1.0 rating). /200 mm / provide & fixing of of 8" s/valve for sump well with bend in village bohar milvan

Central Government/Public Sector

CTN :45592824

18 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - ap-apd-0113-rl-26-c298030012]scrap cond. released unserviceable rails such as check rails, rails 80 bh, joint/welded rails, rails-60 r, 52 kg, check rails 60 r, rails 75 r, sej stock rails, tongue/switches/ wing rails, different gages/length and cut pieces of rails and all types of mixed rails bg, mg, ng with/without attachment of acb plates, clamps, bolt & nuts fish plates, signal boards on as is where is condition available under the custody of cdms 08ward apnote: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. (loc:bin no 113 at scrap yard)

Central Government/Public Sector

CTN :45593087

29 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - released and unserviceable cl.iii rails to be delivered on actual weighment basis. (i)check rail 90r flange cut-65.34 mtrs-2.333 mts (ii)sej rail stock 52 kg-01 no-0.26 mts (iii) sej rail tongue 52 kg-02 no-0.56 mts (iv)built up crossing i in 12 52 kg-15 nos-10.5 mts (v)cms crossing 1in 12 52 kg-04 nos-3.208 mts (vi)glued joint 52 kg-21 nos-8.169 mts (vii)cut rail 52 kg-11.37 mtrs-0.590 mts. total qty -25.620 mts. not for sale-(i)cl-i 52 kg g.joint 1 no &03 nos of sej rails are treated as nfs. (ii)swith + stock rail 52 kg cl-iii 1 set nfs. (iii)90 r f.cut check rails are attached with ci bklocks with & without bolt &nuts it may remove and handed oner to the custodian. (iv)all other materials near by the lot treated as nfs.any other material in the lot other than the items earmarked for sale as per do should be handed over to the custodian as nfs. note: -(1) delivery to be made on actual weighment basis (2) jcb/crane /manual loading is permitted. (3) when crane loading is not possible, the purchaser [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs. (4) in all cases i.e crane loading/manual loading, when the length of rails exceeds 5 meters length, the purchaser [by engaging his own labourers] is permitted to cut rails to convenient lengths not less than 2.5 meters. (5) purchaser [by engaging his own labourers] is permitted to cut rails and hand over the non-ferrous & excess qty to the custodian. s.1539. no.079583-25-00002 dt.03.03.2026. hsn code: 720429, pl no. 98030103. custodian- sse/pway/vlr.

Central Government/Public Sector

CTN :45593138

29 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - released and unserviceable cl.iii rails to be delivered on actual weighment basis.(i)check rail 90r flange cut -100.56 mtr -3.591 mts (ii)sej rail stock 52 kg-01 no -0.26 mts (iii) sej rail tongue 52 kg-01 no -0.28 mts (iv)glued joint 90r-04 nos-0.88 mts (v) glued joint 52 kg-03 nos-1.167 mts (vi)cut rails 52 kg-2.27 mtr-0.118 mts(vii) cut rails 90r-0.96 mtr-0.043 mts. total qty.-6.339 mts.not for sale:-(i)near by the lot c-iii 50 r rails are available(ii)st-02 90r g.joints are attached with more than 1 mtr rail it may removed and handed over to the custodian.(iii)near st-02, 01 nos of g.joint c-1 52 kg is treated as nfs.(iv)90r f.cut check rails are attached with ci blocks with & without bolt & nuts it may remove and handed over to the custodian.(v)all other materials near by the lot treated as nfs since vlr yard.any other material in the lot other than the items earmarked for sale as per do should be handed over to the custodian as nfs.note: when crane loading is not possible, the purchaser [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150kgs.(iii) in all cases i.e crane loading/manual loading, when the length of rails exceeds 5 meters length, the purchaser [by engaging his own labourers] is permitted to cut rails to convenient lengths not less than 2.5 meters. (iv)purchaser [by engaging his own labourers] is permitted to cut rails and hand over the non-ferrous & excess qty. to the custodian. s.1539. ds-8 no.079583-25-00004 dt.09.03.26 pl no.98030103.hsn code: 720429.custodian - sse/p.way/vlr.

Central Government And Public Sector

CTN :45561497

25 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of valve spindle nut bottom for btpn wagon. drawing no: wd-86081-s-66, item no. 12, alt-16 with latest alteration. material spec: as per drawing with latest revision and amendments. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45571784

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of pway scrap - hook bolt off size (us) broken/s tie angel corrugated (u/s), chequered plate corroded (us),m/s clit inner/outer with t bolt (us) broken, fish plate 52 kg off size (us) broken, fish plate 60 kg 0.910mm glued (us) broken, stretcher bar us broken, slide chair plate (us) broken, check rail heel block off size (us) broken, metal liner t-3741/3742 (us), erc (us) broken, plate screw off size (us) broken, cst -9 pot (52kg/90r) (us) broken, 90 r fish plate us/broken, sej bearing plate (us) broken, different sizes bolts & nuts, misc/scrap; compressing of i) cut piece of flange different sizes, ii)others

Central Government/Public Sector

CTN :45373370

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of bolt, t, cl10.9, 100mm, m30 - 3029185 , bolt, t, hts, cl10.9, m36x3 - 3029190 , bolt, t, hts, cl10.9, m36x3 - 3029177 , bolt, hex, cl10.9, m36 - 3029183 , screw, hex, sbm c6 shear, 180mm, m42 - 3028505 , blt, ctsk, pendulam shear, 240, m30 - 3028522 , stud, sq. neck, sbm rr455 stand - 3029180 , stud, sq. neck, sbm rr472 stand - 3029179 , spindle nut, sbm, guide clamping - 3029382

Spindle Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors